Shylily Reacts to 'I Made the World's Most Powerful Hammer!' | I Did a Thing

[@lostnemesis]

it's terrifying because he actually tried to make something decent because even he was scared.

[@blackcrasanblade]

be fair it a 50cal primmer hammer and worst part most decent-hardcore crafting hobby tend to use those machines or able to make that with out the machines but we have shed and can get 50 cal primers

[@pico7269]

You don’t know true fear until you’ve been dared to fill a potato gun with a wad and about 200 ball bearings

[@idkbacon]

@@pico7269 Beeg shotgun...

[@twoheartsoff3255]

@@pico7269 I think this does go against geneva convention though.

[@friendlycomradeivan5393]

@@twoheartsoff3255 You mean Geneva suggestion?

[@faintduch6630]

Just gotta say, Lilly’s take on not skipping ads “Look we’re already stealing content by reacting, the least we could do is let him get his bread” (probably not exact but you get the picture) was the peak of being a based react andy, and it’s good to se her being consistent

[@PierceArner]

100% this.

[@UmCaraNormalnumPlanetanormal]

Factual

[@markov633]

you know what you have a point

[@zuttoaragi8349]

That's one thing that annoys me. I've seen a few weak excuses like "I may have my own sponsorship with them" or "I may get sponsored by a competitor".

[@vocassen]

Idk thousands of people watching an ad and the creator gets only the equivalent of 1 person watching, e.g. nothing. Ads are already a waste of time (more economical to pay for KZbin premium, seriously), making it even worse is NOT very smart. I appreciate the gesture but is doesn't really make sense. If the creator was getting paid the equivalent of thousands of people watching, sure

[@bobawatch]

As someone currently doing mechanical engineering in school and taking a machine shop class, the reason he doesn’t have anything on his hands while using the machines is because if you wear gloves or something, they could potentially get caught in the machine and pull the rest of your hand in. Better to be missing some skin off one finger than to have your entire hand mutilated by a machine that’s spinning at very high rpms.

[@mallardofmodernia8092]

Not just that but for some tools wearing gloves worsens your precision and feel for using said tool.

[@pacman6007]

Was looking for this comment. I used to be a machinist, and can vouch that this is absolutely correct. Never wear gloves if they can get caught, cause your hand is going with them, and if the thing can shred metal, it can shred your hand too.

[@snipermagoo]

If it rolls your entire arm around it, the plus side is you probably won't feel it. The minus side is that that's because your skull will hit the tool very fast.

[@the98themperoroftheholybri33]

A German fascinated by engineering? Lily couldn't be anymore of a stereotype if she tried

[@nkyfong]

Was this comment made with malicious intent? Just asking

[@nabro4364]

@@nkyfong prb just a joke. No need to over think things

[@Emulleator]

@@nabro4364 engineering is no laughing matter!

[@GreatWightSpark]

Except she has a brilliant sense of humour

[@Darkvoidninja]

@@nkyfong even if it was its charles v britannia,

[@KahavaveCAPIPI]

One of my favorite genres of youtube channels is "How is he still alive". This guy is right up there with Styropyro, aka the dude who got bored of playing around with lasers that could immediately blind him for life just for being in the same room when they're on and decided to shake things up by going tornado chasing.

[@khristopherkomodoensis4734]

Fun fact: styropyro actually got an offer to design weapons for the freaking US military but turned it down (also he started but didn't complete a doctoral program in his degree but that still leaves him with a Master's).

[@avroarchitect1793]

@@khristopherkomodoensis4734 Incorrect, he was propositioned by LOCKHEED

[@DangerVA]

@@avroarchitect1793 Wow, just wow.

[@majomaheriose]

Styropyro and Collin Furze Furze has made some crazy stuff over the years and Honestly I am surprised he still has all his fingers

[@ryanbui2046]

Micheal Reeves also kinda fits the niche too, although he’s more of “hilarious crackhead goblin” lol

[@Setharial]

It's a miracle that this guys is still alive somehow

[@faintduch6630]

He’s kinda like the guy who gets zapped by everything in his videos, controlled chaos... either that or he’s just really lucky

[@randommcranderson5155]

@@faintduch6630 nah the guy who gets zapped has a good understanding of whats safe and what isn't. He goes for looks painful but is ok. This guy was climbing on top of a spinning lathe. He's just an idiot.

[@Alik_Odess]

At least he didn't make a bayblade that run on chainsaw engine and machetes... right? KEKW

[@xcutionunknown9634]

@@faintduch6630 ElectroBOOM?

[@Veristelle-]

@@xcutionunknown9634 Pretty sure he means Michael Reeves (in his youtube videos, not streams).

[@ZeroHero3d]

"Look at that price. $1000. I'm better off just making one myself." "So my first step was buying a $2000 lathe." Already this man is proving Australians are insane.

[@w.d.gaster1142]

Nice 69 likes, lemme ruin that for ye

[@mrlemonlord9732]

As an aussie myself, we are indeed not mentally right in the head Edit: also bare foot is very common in Australia.

[@eyalm867]

Think of it this way, he can use the lathe for more than he can use the hammer thing for. And where's the content, the stuff that makes his money, if he just buys it online and calls it a day?

[@eyalm867]

​@@mrlemonlord9732bloody oath we are

[@PierceArner]

Lily being annoyed by the egg even before the gag takes it all the way to being in the book makes that moment _so_ much funnier.

[@MrSpannners]

Okay dude, are you just an alternate personality of me, or me of you?! Cos I see you everywhere, and you are subbed to so many of the same things as I am.

[@Finsternis..]

5:32 This is probably the very definition of "Kids, don't do this at home". Actually, his whole video is probably well summarized with that.

[@gladwrap9354]

A lot of his videos are

[@darthdead97]

i worked with a lathe (although it was bigger) my boss would have killed me for this move. and im not sure if im only mean this figuratively or literally. This is more like: "Kids. Do NOT do this, even if you want to die!"

[@0Clewi0]

@@gladwrap9354 A few of his videos aren't

[@sirjazz1268]

This man is the 101 of "for the love of God, don't do it !!!" . . . With legs !

[@LoliconSamalik]

*Humans, don't try this at home.

[@RichyArg]

i was surprised she was as bothered by the safety stuff. Lily either has some workshop experience, or it's just that every german is born with innate knowledge of safety regulations.

[@neon9165]

tbf atleast at the schools in my region we have mandatory Workshop class, in which ofc. we have like 5 (School) Hours of Safety Stuff regarding tools and machines

[@mallardofmodernia8092]

@@neon9165 same in the uk with design and tech, resistant materials classes and engineering which is optional later on. Not that people really pay attention to safety, it would often be raining hammers when the teacher was preoccupied or drill bits exploding. Glad that in my years of doing those classes worst i got was metal and wood splinters and a metal block dropped on my foot, broke my thumb in history tho.

[@theultimatefreak666]

The first option is proven wrong in her concern about grinding steel you hold in your hands. If she was in a workshop at any time she'd know that there isn't any special protection. The second option is proving wrong by half of the people i was in training with (in an attempt to deburr one did that tech-deck way of grinding with a 1mm sheet metal on an open top belt grinder which had no plate to hold it in place like IDAT had below his block of steel, suffice to say the sheet was launched across the room followed by him losing a good part of his fingertips)

[@Cooldude-ko7ps]

Or she has common sense

[@kiritotheabridgedgod4178]

@@theultimatefreak666 the second option isn't disproven, just because someone knows health and safety regulations doesn't mean they're going to follow them.

[@mathiasaisi5107]

The sheer frustration in her "why is there always an egg!" at 19:46 gets me so bad

[@lennartstockl5826]

Reminds me lotion guy in his infamous video.

[@A-Microwave]

How to basic would be a nightmare for her

[@Marthor]

The way she says egg at 19:45 makes it seem like she's been finding eggs in weird places all her life and I love it!

[@I_am_ENSanity]

As a former welder who had red hot metal shards shoot through my glasses and into my eye you just get used metal shards going everywhere. Luckily, I didn't end up like my buddies who passed away on site. PS: While I got most of the metal removed during a 1 hour eye wash I had to go to my optometrist and they brought in a specialist to remove the bit that burned it's way into the surface of my eye. PSS: Remember, he has children by the way.

[@M7S4I5L8V2A]

I remember half the people in my welding class not caring about shavings flying while grinding and them flying in my face a lot along with it catching a acetylene torch with a hole in it on fire.

[@SharkNinjaBlueStar]

I get jumpy when I have to watch chips flying off a shaft while it's being machined, I don't know how you welders do it.

[@Toolumens]

I think that’s his nephew, I believe he has an older sister and younger brother, could be wrong though

[@billythenarwhal1579]

This is why I'm a machinist and not a welder.

[@Randuski]

@@M7S4I5L8V2A when I was in welding class in hs, for some god damn reason, and I'll never understand why, I sucked at welding with a mask on. So in order to pass my assignments, I would weld without a mask. No clue what the difference is, but luckily my dumb ass didn't end up with any major damage. My left eye is a little blurry on some ways, but I mean hardly. My vision is still great. Would 100% never do it again, I can't believe I was so stupid. Like, just fail the class who cares 🤣

[@spatan9835]

I added this as a weapon in my D&D game. It’s a hammer with the loading property that does an extra 2d6 piercing damage.

[@konradkinne4089]

I love how everyone's malding over how dangerous this thing when it's like, probably not even in the top 3 most dangerous things he's made, maybe not even top 5 lol

[@Alan_J_T]

The spinny top of death would have to top the list that thing destroyed walls

[@dr.bright6272]

It's a good thing Lily doesn't have this hammer. She'd use it for ill.

[@blackcrasanblade]

yeah 50cal caliber primer hammer and her don’t seem good idea

[@skeletonwar4445]

The most terrifying womp

[@silverrey7379]

@@skeletonwar4445 she'll use it randomly in one of her ASMR videos without saying anything about it

[@Xylospring]

@@silverrey7379 At First" Rubbies for 20 Minutes. Then suddenly out of nowhere, A 50 Cal Primer Hammer.

[@KamenRiderRaiden]

@@blackcrasanblade Fuckin .50 caliber primer hammer and *_ME_* isnt a good idea, and I'm pretty careful with boomy-sticks of all sorts

[@NikFromm]

This video is the epitome of “HOW MANY TIMES MUST WE TEACH YOU THIS LESSON, OLD MAN?!”

[@OdinCasts]

19:50 sounded so genuinely angry, it made me laugh harder than the rest of the video lmao

[@hinderburger3804]

19:48 orca losing it by an egg. Love that kind of voice

[@GuitarGuruGaming]

I know, something about her voice there is great

[@spunoffsee]

19:48 That's the opposite question I usually ask...usually, my first two questions of the day are "Why isn't there an egg" and "Why is the rum gone"... This is generally as I'm staggering into the kitchen...

[@vargabercel1828]

as a person who actually learns about lathe machines at school this hurt me

[@nacl4988]

That is like, His hallmark. "Makes every industry professional cringe"

[@mallardofmodernia8092]

Havent most people at least used a set up laithe?

[@Menuki]

It made me nauseous….literally physically ill

[@hefas842]

just to make you everybody else who reads this feel even worse. when i remove birdsnests from the lathe I dont bother with finding a pair of gloves, just barehand grab and pull that shit

[@vargabercel1828]

@@hefas842 tbh im like that as well too lazy to get gloves and I just yoink that shit

[@Newbss_]

In response to lily being uncomfortable because he’s barefoot, handling heaps of metal shavings (called swarf), and all the other dumb shit he’s doing, just remember that he’s an Aussie and we do this shit all the time, we’re just built different

[@tobimoore9853]

We are built to be so dumb that we are immune to the dumb shit we do

[@blankityblankblank2321]

I can say with confidence as someone who managed a machine shop that yes, you try not to use gloves if your hands around rapidly spinning anything because of the risk that a glove hits the spinning object it can get pulled in, along with your hand. This would turn a grizzly incident into one of those horror "strapped to a conveyer belt" incidents. Also, DO NOT DANCE ON TOP OF A SPINNING LATHES!

[@Khornecussion]

He made a Boom Hammer from Bloodborne. He just needs a thruster that would throw your shoulder out of socket and you'd have a proper Boom Hammer. Lol.

[@KamenRiderRaiden]

*_DONT GIVE HIM ANY IDEAS YOU GODSDAMNED PSYCHOPATH!_*

[@Cadrid]

Lily’s really letting her German colors show, what with all the engineering anxiety and criticism.

[@NateVHVT]

Under rated comment.

[@TheKairon999]

19:48 This guy has the power to bring out a new voice from Lily 🤔

[@cloudread1k]

lily: "i have never felt so uncomfortable." me: "oh ya? want a bet i can find a video that will make you even..." i did a thing guy: (proceeds to stuff centering tool up nose.) me: "you know what for get it. i quit, i don't want to top that."

[@KamenRiderRaiden]

Same I Did A Thing Guy: 5:30 *_MOTO SURF!!!_*

[@miraiokadon9476]

Damn, this guy is just so terrifying sometimes XD

[@sirjazz1268]

I wish I never knew this Guy... just like Lily, each time he does somethin' perfectly unsafe, my butthole crumble on itself under the weight of literal cringe and anxiety, passing through another dimension.

[@thebigsam]

Have you seen him in a boxing match? The dude is a monster

[@HardstuckYuusha]

I also started watching his video since this hammer video came out. I really like his sense of humor.

[@slee_kyle]

"And I like this thing. It's like I'm holding a badly rendered pistol." Ah yes, the nail sniper pistol fired with a hammering action.

[@niscent_]

just so you know there're some protective gloves that are specially made for use with rotary machine, they are made to have extremely weak tear resistance at designated points of failure so that they don't get your whole hand caught into machines, they have a shorter lifespan and cost more, which is why they are rarely used...

[@try2fly]

Lily's sounds of RRRRRR is so perfect. Her "urrrrrr" or purring is amazing.

[@battiger00568]

1:02 thats pre 2001 new york, you can tell

[@Real_MisterSir]

Isn't it about time this guy invents a proper screwdriver for Lily?

[@Scudboy17]

I'm honestly surprised IDAT hasn't been flagged for showing extremely dangerous tool usage, but then again, it's far funnier watching him almost tbag a running lathe.

[@Reineerus_The_Rat]

I mean he does have background and training. Puts disclaimers in most of his video descriptions. And he's clearly comfortable with his tools or has someone with medical knowledge on hand

[@oceanofgaming]

Imagine standing upstairs and getting a Nail janked into your Feet out of nowhere

[@Fordrake21]

Being a polymechanic technician, and seeing him doing his hammer sure made me laugh a lot, i mean, i think everyone that works on this field like me has at least once, tried to create something crazy and dangerous. But the thing that brings you to continue into the crazy stuff, is to see it working in the end. And it does sometimes work too well to a point of becoming dangerous. Of course im only talking about crazy self made stuff, otherwise if we use most of the tools to craft more "normal" things like watches, car parts, motors and so on, there isn't much danger, but not much fun either

[@gong_see_0000]

wow…

[@itskhro]

15:49 This got me somehow, jesus christ this guy is great

[@WhizzBandit]

That hammer looks so cool but I'd be way too awkward to try it...

[@capperbuns]

I would love messing with it.

[@baelenmckay1072]

I am an Australian guy, watching a German orcat, watching an Australian Engineer. Life going in full circle at it's finest

[@Apokalypex]

5:31 There is a clip on Reddit where a guy gets shredded by a lathe... and this bro is literally dancing on one 💀

[@KamenRiderRaiden]

Yeah and while Lily's gettin twitchy watchin him pants some _SHAVINGS_ , I'm like "MY SISTER IN SHAMU, HE IS DOING FUCKIN *_MOTO SURF ON A POWERED ON LATHE!!_* "

[@TheGstaeta]

0:30 I'm genuinely astonished by how the character actually reacts yo real expressions perfectly.

[@morgrimgaming7342]

To answer your welding question, Lily: Generally speaking, your eyelids do NOT offer enough flash protection when close to a welding arc. My source: Me, who recently completed my local college's welding program, and gave myself minor retinal burns whilst working on the final project... I forgot to re-engage my helmets auto-darkener sensitivity after using a grinding wheel.

[@kecsi4711]

sometimes i wonder how this guy is still alive 🤔

[@ticklord]

I think it's important to note, a lot of people that know what they're doing, can act like they don't, while doing dangerous things because they know why it's dangerous in the first place. It isn't good to do, but having the knowledge to do the bad thing makes it less dangerous. Still dumb.

[@kecsi4711]

@@ticklord I know (at least I think) he has the proper knowledge to not unalive himself. I just hope noone with less knowledge will try to recreate any of his inventions 😅

[@walkingmemetichazard]

It's quantum immortality (look it up, it's really interesting) but he's dragging the universe along with his consciousness

[@brynhilder8922]

1:20 lily the hype man

[@delta_gon5277]

19:28 This is the equivelent to wraping barbed wire around a baseball bat

[@Yuki_Ika7]

Rusty barbed wire for double the war crimes

[@KamenRiderRaiden]

@@Yuki_Ika7 May as well soak the fucker in some diesel over night for some toxic "salt in the wound" effect

[@Ally-Oop]

I LOVE this guy. Getting to watch it over again with shylily reacting is so so good.

[@Mr_Hillbilly_weeb]

The thing that's making me cringe is knowing what it feels like to get metal shavings in your skin they hurt worse than wooden splinters

[@Rezuvious]

Ah yes the hot tiny piece of flying metal that lands on your skin burning it. That wasn't a fun experience.

[@Scudboy17]

Only thing worse is fiberglass. You never get just one fiberglass splinter. They always invite a few friends along to ruin your day and there's no getting them out.

[@SharkNinjaBlueStar]

It sucks. So. Fucking. Much. I've spent damn near a whole day at work trying to dig out one damn splinter from my hand.

[@Tigershark_3082]

@@Scudboy17 It's even worse when you get them in your eyes (they can make you go blind) This is why when working with fiberglass, you always wear proper safety equipment

[@Mr_Hillbilly_weeb]

@@Tigershark_3082 not just fine for glass I've seen my body using a wire wheel to clean rust and one of the pieces of the wire wheel came flying off and literally got embedded in his safety glasses

[@adaptable1553]

Dude does everything the most dangerous way possible as if he doesn't realize it for comedic purposes. All just so we can have a laugh, that's dedication to entertainment right there. Big ups.

[@sagescarletwing4330]

as a man from the south, this is how we attract friends. it is also why we all live happy BUT short lives.

[@w.d.gaster1142]

"Safety at first" *Literally fucking stands on the whole thing*

[@DarkestVampire92]

I love watching I Did a Thing, but Lilys Reaction makes it 10 times better.

[@FutureAIDev2015]

Is Lily actually interested in design and engineering things like this? If so that is amazing in every way imaginable

[@Ichengo42]

Yess!! I love watching her laugh to the weirdness that is this guy!

[@ledpirate4999]

Gloves are usually worse for machines with spinning components because they might get caught and make a worse scenario

[@bestdadoftheyear7181]

Gotta say, i did a thing has a very good reputation for making his viewers have HIGH amounts of anxiety.

[@Klint_Izwudd]

Her reaction to seeing the metal shavings was genuine fear. She knows the pain of the forbidden s'ghetti.

[@flashingstorm8360]

He genuinely made a good hammer

[@ReaderViaNil]

lillys laugh makes life worth living. Specially when the dude picks up the metal shavings and she goes "aaAAAUUAAUUUUGGGHAGHAGGHG"

[@ZERARCHIVE2023]

First time watching this dude's video, and it was even funnier thanks to your reactions, thanks Lily

[@Charley-ju6yg]

This is one of the most beautiful things I have ever seen

[@TarousDT]

the shit he does while the lathe is spinning terrifies me

[@wolftimber8191]

Him dropping the part on the ground then it lands on his blueprints reminds me that a shop instructor used to say when we'd start looking for parts on the ground, "You're praying to the part gods now." Those springs the size of rice were annoying.

[@RiverOfHate88]

Lily watching ads is hilarious 😁

[@Kyleplaysgames567]

We need the Slow Mo guys to film the nail shooting through the plank of wood and into the ceiling.

[@sirweebs2914]

20:56 I love how he thought that glove would hold a nail that shoots through more than 1cm of pure metal ^^ adorable

[@user-lb6cf8mq6j]

Congrats you won hit me up 💌

[@lleom7838]

0:22 As a Hispanic, I can confirm that we do love to live life on the edge

[@venomtheallmighty69]

I finally got my orca pup and I love it so much thank you Lilly!!!!!!

[@DielectricVideos]

Metal chips from cutting tools usually aren't all that sharp, so touching/stepping on them isn't as severe as one might imagine. The machining process tends to anneal the steel, causing it to become softer and more malleable, and the thin, coiled chips are more like a dish scouring pad than a bunch of small blades.

[@DR4C44N]

This guy is great holy crap. I cried laughing.

[@Martynas954]

as a carpenter that often has to work with metal finishes and wood, i can 100% agree that working without gloves is much more comfortable, tho because of that i had many cuts that could of been easily avoidable if i did use those uncomfortable protective gloves.

[@electricbayonet2]

“My butthole becomes uncomfortable!” ...well, if IDAT is ever putting together a ‘Welcome to my channel!’ video, he now has quite the ringing endorsement from Lily to include.

[@draconisrus9273]

The way Lily worries about the feet of the author of the original video. The emotion it gives her. It's very sweet. What about that hammer-gun, I've seen a scarier version. That video was called " Молоток убийца". It's on KZbin, but it's in Russian. Well, thanks for the fun. If laughter keeps you alive, after Lily's marathon of reactions, I'm immortal.

[@Cream.o.]

I feel like Lily has a love hate relationship with these videos 😂

[@creeperbait_42]

this could be on r/itemshop *blust war-hammer:* *wepeon ability:* while charged with ability ammo: triple all bonus blast damage and deal it as piercing damage instead spacial- holds victim hit in place untill reciving the "assist" bonus action from an ally or using the "break free" action +100 bonus blast damage while charged with normal ammo +30 wepeon blunt damge *ammo type:* uses 1 explosive charge as normal ammo and 1 builder's nail as ability ammo spacial- can be used while uncharged but losses all ammo bonuses can hold 1 ammo, 15 second recharge time (10 if u have the "quick charge" feat) *side effect:* has chance to activate randomaly appon any phisical damage to the user while charged, using up the charge and activating ability in a random direction (friendly fire: ON)

[@SilverFang95]

OSHA would have a field day with this guy haha

[@Karak-_-]

I don't think OSHA weilds any power over him. First, he's doing that on his own, in his free time. Second, he's australian.

[@CapOfXav]

NO GLOVES AROUND ROTATING MACHINERY is workshop rule #1 Machines are unfeeling and have a unending hunger for hands.

[@tantalus44]

Wait. Did that nordvpn ad have a 9/11 joke?

[@wrobelx]

I have the slightly possibly maybe uncommon feeling that she might be interested in this

[@More_Moose]

Jiggle physics

[@PK_Scratch]

This video feels like it should have a permanent watermark of "DO NOT ATTEMPT THIS AT HOME" across the entire length of the video. RIP his home.

[@Will-Xaru]

I love the random noises Shylily makes 😅it's like she almost has tourettes and repeats things she hears automatically but in a super cute way! 😊

[@fantomphlame5565]

So, echolalia?

[@madwolf7033]

Turner here. Been operating lathe for three years and some. Just use a hook for metal shavings an a spoon for cutoff product. Fast spinning jaws on bare fingers can cost you a fingernail and some skin. (i would know) Fast spinning jaws on gloved hands can cost you a finger. (every master told me)

[@Hunoa44]

Lily clenches at this video,so she knows how some men(including me) feel when seeing girls talk about yaoi type stuff Humu,Humu

[@haydenbritt1237]

5:17 As someone that works with one of those machines every day, this made me wince in pain. Good on him to committing to the comedy bit though. EDIT: I just watched half a minute further... someone drag him away from the machine, also buy him a beer.

[@naomy1701]

this guy is nuts hilarious! also crafty in an unconventional way, but obviously he has some screws lose >_< 10/10 would watch again * ^^ *

[@DonPatrono]

my 10 years as an HSE are making my brain scream in horror and disgust. My previous work experience rejects his practices on a subcellular level. I am terrified

[@NINJAKCDX]

17:15 I think that a Scottish orca took over the internet

[@mariothane8754]

This guy is going to thrive during a zombie apocalypse

[@TuftyTaltan]

I've seen the original video 2-3 times already and never noticed the brick joke of the cabinet door falling off after he stole the hinges. Funny stuff

[@manticorigon4908]

Lily that's a revolver called Samaritan. Wielded by one of the most badass comic book characters ever conceived.

[@lucifermorningstar-ln5si]

Shylily is freaking adorable

[@MrSociophobia]

I actually yelled out loud when he was putting the metal shavings in his pants. What a horrifying feeling to imagine.

[@Firestar4041]

Honestly sparks are only hot for a brief second, and if anything are more surprising than painful. Had one slip behind my cover shirt and burnt a hole in my undershirt. And generally, grinding metal doesn't usually give off a lot of heat, so handling it with no gloves is safer and easier, seeing as gloves tend to take away grip control. Lastly; you'd be surprised how much punishment the human skin can take

[@n0denz]

0:30 great rigging 5:31 I showed the original to my dad who is a big do-it-yourselfer and a big simp for safety. This made him angry, and when I told him to keep watching, he yelled at me and stormed off.

[@michaelfrank1553]

German doesn’t see the 911 joke

[@Marsiekuma]

I was watching this with Lily this evening when I was cooking and now the vid is out. Damn ya'll fast 💀🤩

[@404Yaiba]

I find it funny how everything was scary but when he started using eggs she got upset lol

[@Kakuretaka]

3 holes in the roof and one surfboard later. " I think I'll stop playing with this thing "

[@rednoodleoffate]

I feel like this guy would either die the first day of the zombie apocalypse or be the last one left alive. There's no middleground.

[@RapidAquas]

Ngl Lilly seems pretty chill to hang with