SHYSKY Heavy Duty Low Noise 24V 120W Micro Brushless DC Water Pump DC60G-24120S-1 12m Lift 3800LPH

SHYSKY DC60G-24120S-1 Micro Brushless DC Water Pump, for sample demand, www.amazon.com... . For bulk demand, or for customization, contact us through mail, [e-mail] (Https://www.s-waterpum...) .
Heavy Duty Low Noise 24V 120W Micro Brushless DC Water Pump DC60G-24120S-1 39ft 1003GPH, DRY RUN Protection, For Cooling Circulation Pressure Sys
About this item
SHYSKY DC60G-24120S-1 Water pump, Inlet & Outlet: Both 3/4'' threaded, with external diameter of appr. 25mm; Max static lift 12 m (~39 ft, in pressure, 0.12MPa or 17.4PSI); Max horizontal flow rate 3800 LPH (~ 63L/Min, also, ~1003GPH). Typical feature is with good lift and flow rate, suitable for some micro/ medium circulation/ pressure/ cooling sys.
Brushless DC motor, also known as EC motor; Magnetic Driven (NO DIRECT AC 100-240V POWER CONNECTION, PROHIBITED); Small size but strong; Low consumption & High Efficiency; Long time continuous working with low noise;Safety - no spark, Explosion - proof; Low noise about 40dB.
With typical features of low-voltage safety, high power-efficiency, low noise at normal work and supporting long-time continuous reliable running, this pump is widely applied for fountain landscape, medical equipment water cooling circulation, air compressor cooling circulation, PC server water cooling, yacht/ vehicle water cooling, and vavrious other industrial, medical and household water processing systems. Note that pump cannot be self-priming, and it is important to make sure that there exists no dry run (especially for long time) and avoid impurities in the pumping systems.
Variety Power: 24V DC electric source, Battery or Solar Panel, etc; Soft Start with Low in-rush current, Especially suitable for Solar SYS who can not provide over-high startup impulse current; Constant power level when powering vol. is over 24VDC yet under 28VDC, quite useful feature in some cases.
NEW FEATURE: DRY-RUN PROTECTION feature is integrated now in default. Pump works at rated voltage: When there exists no/ in-sufficient in-flow (or significant air bubble contained), it is DRY RUN scenario and protection will be triggered: Pump will access stop-run-stop-run---cycle, greatly reducing rotation speed. When flow comes sufficiently again, pump will re-access normal run. It greatly alleviates physical friction between rotor and pump body and heat generated, yet, NOT completely eliminates the friction since still running yet at lower pace.
Dimension and weight 152 x88 x110 mm (~6 x 3.5 x 4.3 inch); appr. 1.5Kg (~3.3lbs)
External diameter of outlet 3/4” thread (M25)
External diameter of inlet 3/4” thread (M25)
Driving mechanism Brush-less, magnetic isolated design
Material of pump shell ABS,PES/SPS/PPS/PA66+30%GF (Optional when customization at MOQ)
Condition of us Support continuously work, submersible or land use (note that pump cannot be not self-priming)
Suitable medium Water, oil, etc (corrosive or special fluids shall be tested in advance.) (Pre-test needed for special liquid)
Max working temperature 100 ~ 120℃(for S/A sub-series)
Power consumption 120W @ 24VDC
Rated voltage 24Vdc
Working voltage range 12Vdc ~ 26Vdc
Max load current 5A @ 24VDC
Max horizontal flow rate 3800L/H @ 24VDC (~1003 G/H)
Max static lift 12M @ 24VDC (for S/A sub-series) (~ 39 ft)
Noise class within 40dB, at 1m distance
Waterproof class IP68