Siemens LOGO! Save from PC to SD card & Load SD card to LOGO

How to load your LOGO! program from your computer to an SD card and from the SD card to the CPU/BM.
Software: Logo Soft Comfort V8.2
CPU: FS04
Notes:
DO NOT change the default name of the save file from LOGO_U_P
The CPU must be in stop mode to load
You must be in Admin mode to load
You may have to enter a password to get to admin mode
The default password is always "LOGO" all caps
Send the link to this video to the person who will be receiving and loading the SD card to the LOGO! They will appreciate it!
Thanks!

[@EngrMdMahfuz]

An wounderful tutorial.

[@jayfranklin]

Did you make that panel connected to the inputs? That seems like a nice addition for basic testing.

[@evski4506]

No, it came with a training kit. It is very useful for testing and I think Siemens should make them more available. I 3D printed the dinrail stands though! :)

[@mortenlund1418]

thanks for great example

[@mohdazrihizamibinrasid8262]

Hi, thanks for the great tutorial. I have a logo without the screen. How could I upload the program using an SD card?

[@ABDsa]

After I input the password and go to Ioad prog

[@evanalley1458]

Make sure the name of the file that you save on the sd matches exactly how it shows in the video. Make sure the sd card is formatted to FAT32. Make sure that the hardware setting in the program matches the logo that you are loading it into. If none of that works, try a different sd card.

[@ABDsa]

@@evanalley1458 It turned out that the person who inserted the sd card made to much pressure either getting it in or taking it out (probably the card disloged from the place it is suppose to stay fixed) and broke the sd card reader. Thank you anyway!

[@ABDsa]

@@evanalley1458 The file was correct and the SD card (siemens told me it has to be SD and not SDHC) was ok. Just in case someone else has this problem.

[@evanalley1458]

@@ABDsa ahh you know what i forgot to mention that. I have had that happen one time before, but the screen said no sd, then the whole sd tray got stuck and i had to rip it out with pliers haha.

[@ABDsa]

@@evanalley1458 Same thing here, although the message seems different in this case. And even if it is a user problem, I would expect a better design from SIEMENS really. Thanks for your help!

[@Jsr735]

Good sir

[@Jsr735]

I have problem while coone ting logo to pc by Ethernet cable what to do

[@lucyb7213]

Hi card unknown what to do sir

[@personaquecomentacosas]

Help I can’t save the file in .bin