Im no expert in NX Ideas, but from my work with inventor over the past decade, I'd say this mainly looks really cool but you could have used more constraints and a couple of equations as well as taken advantage of the mirror command. I like the way you worked around the part its just that if that component were to ever require changes, you would find yourself spending hours just dealing with the sheer amount of dimensions and steps you went through probably having to delete and re-do most of the work while applying a few simple changes. Good luck though, I'd like to get my hands on a copy of NX some day, then I could learn it
@jacekc72569 жыл бұрын
Dzięki Krzysztof. Super tutorial. Jak możesz to publikuj więcej projektów z NX. Pozdrawiam
@playlabs32075 жыл бұрын
BUeno, muy bueno
@swarnavarakshit54636 жыл бұрын
awesome work bro..
@August3019897 жыл бұрын
Great tutorial! Can I ask is there a way to determine if the sketch is fully defined? thanks in advance!
@ellesse599 жыл бұрын
Very well done Krzysztof. More please.
@lazerplus Жыл бұрын
are you using a 3d manipulator here? what model is it if you are using it?
@krzysztofgad3662 Жыл бұрын
Yes, the cheapest available: 3dconnexion.com/us/product/spacemouse-compact/
@8989rupesh9 жыл бұрын
NICE...can you guide me how you rotating very smoothly? is there any keyboard/mouse option available in UG to ratate model smoothly/dynamically.
@krzysztofgad36629 жыл бұрын
I use the 3D mouse to rotate the model, but you can use the regular mouse with the middle button (scroll) or press the 'F7' key on the keyboard.
@alexanderlyapin80579 жыл бұрын
Awesome
@dastonruziev54637 жыл бұрын
good job
@sameerkharadkar79469 жыл бұрын
Is there any simple step to move or rotate one part keeping other part fix in the assembly? (keyboard command)
@krzysztofgad36629 жыл бұрын
+sameer kharadkar I do not know any simple keyboard commands to move or rotate the model only Assemblies -> Components -> Move Component...
@smeyers618 жыл бұрын
How about voice describing what you are doing and why?
@krzysztofgad36628 жыл бұрын
+Steve Meyers I do not have plans to add voice, what I shows is simple. How do I add voice, this film will have 40 minutes
@raviteja65479 жыл бұрын
excellent tutorials but please put nx10.0 part modelling video series step by step please iam waiting for that
@shekiba.6469 жыл бұрын
I try download NX software trials for windows 10 but there's no download.. where did you get it that?
@krzysztofgad36629 жыл бұрын
+True zumy I have win 8, I think NX 10 is not supported on win 10
@shekiba.6469 жыл бұрын
Oh I see. I have win 7/8 and 10. I was look for Siemens NX download but can't find it. How did you get download? Please help me and let me know. Thanks
@krzysztofgad36629 жыл бұрын
+True zumy You "can" easily download NX10 from the internet (e.g. torrent) and install, but you have to do it yourself if you want.
@n_37197 жыл бұрын
If you're still interested, I found a link: drive.google.com/file/d/0Byb3UYS0Ae_aMFU5WDRQUElMa3c/view To open .isz files, you need ultraiso I tested it on w8.1. Works great for me! Oh, and it's 64bit only.
@andygaze55149 жыл бұрын
this is nice but apart from the rib function it is all very primitive and old fashioned way of modeling. There have been many enhancements in the last few years that could do this complete part quicker, easier and more dynamically for the end user. A good demo otherwise. e.g. why trim up all the curves, why not use the enhanced selection intent buttons that came in at NX5? why not use region boundary curves, you could knock out the entire centre with a shell with multiple thicknesses much quicker, etc. Open volume smart volume, the list goes on
@krzysztofgad36629 жыл бұрын
Andy Gaze I know that there are many ways how to do it (you can do it differently, simpler, faster, ...) this is a simple tutorial showing one way. In any case, thank you very much for your comment and best regards
@mouloudzekar38846 жыл бұрын
Funny stuff going on with those fillets. 18:38 ...
@krzysztofgad36626 жыл бұрын
This is the magic of editing;) It's great to know that you watch carefully. Greetings
@陈虹-z1r8 жыл бұрын
这波可以
@sleddarcheddar9 жыл бұрын
You forgot to radius in two corners.
@omgitzsteg8 жыл бұрын
I couldn't stop staring at that corner!!!
@amina_vlog235 жыл бұрын
Can u send me 2d drawing of this ?
@krzysztofgad36625 жыл бұрын
I do not have drawing for this part.
@ailtondella61708 жыл бұрын
solidworks , mais simples e mais rapido
@kunalmathur65366 жыл бұрын
you have illustrated this in the most PATHETIC way anyone can!!….. Why tf are you changing dimensions like that and how about you use some audio