SIEMENS NX 10 - SHEET METAL

The following video shows how to create sheet metal, for example, the same model as the one created in Solidwork:
• Solidworks in your Ind...

[@deedub7777]

Couple of points: @5:08 you can create the rectangle at an angle so you do not need the move curve command @6:30 & 8:05 you don't need to add the fillets here, the Dimple can do that for you (Corner Radius) - assuming the values are all the same @19:45 you can rebend all three bends at the same time

[@OktoPutsch]

@ 20:33 you created a new part (1-5), but previously we were on 1-3, and when you clicked on the trimetric view button, and then on the assembly navigator panel, there is a magic 1-4 part appearing. Is that a problem of video editing ? i rewinded to check if i missed a step, but it seems not. Nevertheless, apart this detail, the whole tutorial is great, i learnt a lot about sheet metal bending there :) thank you so much ! My only question now, is about spot welding, is it possible to define such a feature in NX for sheet metal works ? And if so, is it taken in account for simulation ? I wonder the same about frame structures and welding.

[@krzysztofgad3662]

+Okto Putsch Thanks, I recorded this tutorial several times and then made one movie (numbering parts it does not matter) it is possible to made spot welding, but you need 'Weld Assistant' licenses. e.g. kzbin.info/www/bejne/g6ebmqqHfraSZ80

[@arturtomaszewicz7019]

Why not use a "jog" tool for the joggle? Sorry I'm new to NX

[@intodesign7562]

@2:36 how did u magically entered the value 0.002. For me it’s giving error😢

[@krzysztofgad3662]

I have no idea🤔 how I did it, just nx accepted the value.

[@guruprasadmek]

How are you rotating the body so smoothly? Can you explain please.

[@krzysztofgad3662]

This is a simple way but expensive: www.3dconnexion.com/products/spacemouse/spacenavigator.html

[@sabarigirikumaranb2684]

informative

[@PisTTasha]

Keep em coming :)