SIEMENS NX 11 - CONVERT TO PMI

Convert to PMI rapidly transforms legacy 2D drawings into intelligent 3D models that help convey important information such as surface finishes and material specs to people who work in parallel product development processes.

[@naveenkushwaha6305]

Thank you so muchh!! brother & Happy New YEAR 2023 ...

[@brainmind4070]

Hi Krysztof, first off, thank you for uploading the video. I needed an NX drafting refresher. Secondly, I had some critiques about your dimensioning scheme. 1) You use "8x45 degrees" to define the pattern of 8 holes. This is over-dimensioned. A pattern of 8 holes can be properly defined angularly relative to each other with only a "7X", as the last gap of 45 degrees is already defined by 360-45x7. 2) You use a linear dimension to define the distance between the 8x hole pattern. This is problematic for a couple of reasons. First, it provides no relation to the central hole. Furthermore, you also use the normal center marks, when you can use the circular pattern center marks. That way, you can define the distance between each hole using a single diametral dimension, which also more clearly implies a relationship between the central hole and the pattern of 8. Those are the only issues I take a firm stance against. If I were making this drawing, I would also attach the A and B datum flags to the GD&T defining the feature being referenced as a datum, but it's effectively the same thing.

[@krzysztofgad3662]

Thanks for the information I did not notice it. I do not focus on the correct dimension scheme, but on the possibility of doing such a scheme in NX. Anyway there should be no mistakes on my part.

[@technicalcadtooldesign31]

Good drafting sir

[@panchalnileshkumar2687]

Hello, Can you please upload a video explaining each and every options in Drafting? It will be very helpful

[@krzysztofgad3662]

I'm sorry, but I don't have such a tutorial yet, best regards.

[@anh6790]

hi guy! wondering that you can move your model so smoothly, Can you show me the way or shortcut key which you already used? Many thanks!

[@krzysztofgad3662]

This is a simple way but expensive: www.3dconnexion.com/products/spacemouse/spacenavigator.html

[@anh6790]

yep! I thought you used some tips :-D

[@rinattroyanov5915]

Hello! How to achieve such a smooth increase? At you all happens smoothly, increase, moving the screen. It's great

[@krzysztofgad3662]

I use the 3D mouse to move a part, something like this: www.3dconnexion.com/products/spacemouse/spacenavigator.html

[@rinattroyanov5915]

Thank you )

[@niteshvalecha8913]

Hi, I need to know, Is there any option to set auto page number. Suppose there are more than 60 pages in one drawing file. And to separate all pages, we write in down right corner "Page 01 of 60" and so on... But Currently, I'm doing this manually. Is there any option to make this auto changeable?

[@krzysztofgad3662]

I have no idea if there is an option that would do that.

[@haoo2341]

thank you, could you tell me. why i dont convert to PMI. My NX is version 10.0

[@krzysztofgad3662]

I don't know what you are doing, it's also difficult for me to say what you are doing wrong, write more.

[@atakanylmaz7331]

why you did not demonstrate the thread area in a detail ?

[@krzysztofgad3662]

I have no idea.

[@atakanylmaz7331]

@@krzysztofgad3662 okay then :)

[@caddesigntech9635]

hi, do you know how to change color of dimention cotation on drawing ?

[@krzysztofgad3662]

Menu-Preference-Drafting-Common-Line/Arrow: community.sw.siemens.com/s/question/0D54O000061xW68SAE/assigning-color-to-sketch-curves-changes-dimension-color-to-black or: File-Utilities-Customer defaults-drafting-General/setup-standard-customize standard 'iso or other modification' I didn't try if it would work

[@iulianmoga9410]

Thank you !

[@coopwagers6569]

cool!!!

[@Anilnani-zd2ig]

hi @Krysztof Gad, could you please tell the name of the product name which you drafted?

[@krzysztofgad3662]

This is a drawing of the item (hub) found on the internet, i don't know what exactly is named.

[@Anilnani-zd2ig]

@@krzysztofgad3662 can you tell us where did you found this Hub ?

[@devdas9982]

how to put dimensions in isometric view in drafting nx?

[@krzysztofgad3662]

I do not know if you are satisfied with my answer but as far as I know it is the same as in other views.

[@MrWhister1]

Hello , i cant see dimension in 3d when i add dimension 2d . How i can open . thanks

[@krzysztofgad3662]

I do not know what exactly you are doing but dimensions as you convert them must be red, select in the tab 'Convert to PMI' type - drawing, you have to try to do something differently.

[@hooniganshooter1289]

Gewinde, Taper???

[@harendergupta1309]

Drafting karke print out kese de

[@sunilkumar-pg9qm]

is it possible to do this in NX 7.5 AND 9