This is by far, one of the best and easily understood tutorials on KZbin. Great stuff.
@thegeterrdone7 жыл бұрын
Thank you for your feedback :)
@miguelgarcia-vg1fh3 жыл бұрын
I'm just learning Siemens TIA software, this was a good start. Thank you
@thegeterrdone2 жыл бұрын
Thank you :) don’t forget to check out our new website for free courses. Only at www.codeandcompile.com
@tansionghuat35284 жыл бұрын
I think NAND & NOR description s are reverse.
@yasirnasafa33797 жыл бұрын
as always u are the best with your deliverable expertise..... hats off
@thegeterrdone7 жыл бұрын
Dear Yasir, Thank you for your feedback. Have a great Sunday!
@muhannadfakhri8 жыл бұрын
Good teacher , good learning thanks Mr. Rajvir Singh
@thegeterrdone8 жыл бұрын
Thank you for appreciation Mohannad.
@muhannadfakhri8 жыл бұрын
+Rajvir Singh (NFI Automation),dear what interrest for and I seek for it more tjme to get it is an analog i/o programming through HMI by using plc s7 1200. If you can in nearest time I want from you send me courses eplains that. thanks so much
@bilaljutt62937 жыл бұрын
Thankyou sir for reply me and sir can you only upload simulation of fatek plc program
@Stardust_Tech_Studio5 жыл бұрын
doing great job Rajvir Sir
@debbyenginer7 жыл бұрын
Dear Rajvir, you are doing a great job. Could you please conduct a session on Industrial communication (Profibus, Modbus, Profinet etc.).
@thegeterrdone7 жыл бұрын
We will do an informative video to understand the difference between these and upload in this channel!
simple and clear information brother,.. Lovely Video
@NicoNulens8 жыл бұрын
nice teaching ! Can't wait for the s7 plc to be delivered .. :p ( Planning to register to your site)
@thegeterrdone8 жыл бұрын
Thank You! You are most welcome to join out Siemens course.
@muhannadfakhri8 жыл бұрын
Mr. Rajvir, I am usually follow and search for all what you share of learning plc vedio. and I understand what you explain in it. what I need courses on siemens plc s7 1200 and HMI programming and in this courses an explaining for analog input and output programming then this signal control from the HMI like fluid level ,pressure or temprature ,etc. can find these courses?
@thegeterrdone8 жыл бұрын
Dear Muhannad, kindly check the curriculum of the course at : www.udemy.com/learn-siemens-s7-1200-plc-from-scratch-using-tia/?couponCode=Website2016 This is the basic course, we are going to update this course (possibly in Nov) with Analog and HMI tutorials for free.
@CodeBreaker19718 жыл бұрын
Hello sir.. How do I get TIA portal software?? Does it need any license key??
@thegeterrdone8 жыл бұрын
You will find limited days trial version for free. To get full version you need to buy license. This may cost about 200 Euros (approximately)
@sagarbhogam1375 жыл бұрын
plz softwear download information sir
@haseebsherani16888 жыл бұрын
pretty nice description!
@thegeterrdone8 жыл бұрын
Thank you for the feedback!
@ADAN_7Vlogs6 жыл бұрын
Excellent video sir...plz make more video for fresher
@raviagniwanshi26424 жыл бұрын
How to download free tia v14
@mohamedsub70238 жыл бұрын
thank you for this explain
@thegeterrdone8 жыл бұрын
thank you for the feedback. Access full course at www.nfiautomation.org
@thegeterrdone8 жыл бұрын
Try EKTS in google. This software is freeware.
@kulbirsingh40256 жыл бұрын
Sir please make some free video on stepper and servo drive controls by plc
@thegeterrdone6 жыл бұрын
These are available already in the paid course - Advanced AC Drive ! :) check www.nfiautomation.org
@دايماعامر-ل6ت Жыл бұрын
موفقين باذن الله
@SINC0MENTARI0S5 жыл бұрын
Video is fine, but too many ads. In less 10 minute there have been like 4 or 5 batches of ads.
@thegeterrdone4 жыл бұрын
You are paying for my Starbucks! Thanks 😊😇
@bilaljutt62937 жыл бұрын
Sir kindly upload fatek plc programing
@thegeterrdone7 жыл бұрын
Unfortunately we do not have Fatek PLC for uploading it's programming lessons
@tarunkumar-ds7gg2 жыл бұрын
Pls siemens course hindi m bnaiye
@rameeti5 жыл бұрын
This video had nothing to do with a Siemens S7 1200 PLC. This video was all about the basics of PLC programming. Please stick to the subject or title of the video. Rename the video to PLC programming.
@bilaljutt62937 жыл бұрын
Thankyou sir for reply me and sir can you only upload simulation of fatek plc program
@bilaljutt62937 жыл бұрын
Thankyou sir for reply me and sir can you only upload simulation of fatek plc program