Siemens S7 1200 "Modbus RTU" Sinamics V20 VFD

Рет қаралды 41,042

plc247 Automation

Күн бұрын

Пікірлер: 33

@chandrajput9006 2 жыл бұрын

Not only show You will explain every point and every block of this program

@plc247automation6 2 жыл бұрын

Please go to the article to read the details

@Kazimroza4u 4 ай бұрын

Hi i am having two v20 drives connected to cpu 1214. They are running in auto mode with analog input controlling frequency. Also the inverters are connected to cpu thru modbus. Currently i had a drive issue and replaced with new drive. Now the drive is running but the rpm, current data not coming in cpu. Kindly guide

@strat_egi 10 ай бұрын

I wanted to use your guide for setting up the device. but unfortunately it does not have such parameters. how to find them? Unfortunately I can’t configure it through macros. sinamics v20 fsc

@uditsaxena3844 20 күн бұрын

Please explain how you got this number1151 and 3199 in your network 4 branch

@syedyasirhussain9302 Жыл бұрын

Do you have video on S7 200 & Micromaster 420 USS Protocol communication?

@ΑγγελοςΔημογλου-π7ι 11 ай бұрын

i followed exactly your video and i still have no connection from my rs485 leds are off....i used both channel 10 and 11 to try modbus rtu connection but no connection do i miss something thats not on the video?

@murilohenriquepereira9771 Жыл бұрын

Goodnight! to make modbus communication with several inverters in cascade as you would indicate?

@devendrachowdary2333 7 ай бұрын

I have a doubt how can we assume and add those numbers to control word to control on and off or rev or fwd .i didn't see those numbers in manual Can you explain me sir

@global-tech3203 Жыл бұрын

Hello dear I got a fault 8180 on my master bloc or my id port is correct. Could you please helping me ??

@rubentjuuu 6 ай бұрын

I'm using CB 1241 - 6ES7241-1CH30-1XB0 (rs485 module) but cannot get the communication to work using this tutorial. please help

@ahmedsami2270 Жыл бұрын

How to cancel the negative sign, as the speed value appears on the inverter screen as negative؟

@ajaydumka731 Жыл бұрын

Thank for such a informatic video. I want a solution , after setting all parameters in sinamic v20 the drive frequency limited to 22.74 hz only . As i already provide min and max frequency. Please help

@adolfoleonhernandezabadia5360 2 жыл бұрын

Mucho gusto, una consulta referente al modulo RTU, que referencia tiene Industry Mall, muchas gracias.

@caonhumr4751 6 ай бұрын

How to read faults via plc modbusRTU?

@logicmindautomation1458 11 ай бұрын

Hi, can you show your wiring on the plc from the drive?

@plc247automation6 11 ай бұрын

go to my website sir

@DomenicoMadeo Жыл бұрын

hello, if I change the frequency and it doesn't change on the v20 do I have a problem with communication? how can i check this?

@global-tech3203 Жыл бұрын

P1000 in you vfd must 5 for frequency control in modbus

@timschulle8238 Жыл бұрын

Can you make a video where you control the v20 with codesys? For Example with a Raspberry Pi. I am trying to control a v20 with modbus in codesys but i dont get the fault. I dont know what i did wrong. The videos with Siemens software exists often, but nowhere i found one with Codesys to control the v20. Thanks :)