Siemens S7 Indirect Addressing in STL siemens

Indirect addressing refers to the use of a “pointer” to indicate where the operand address can be found. A statement list example would be loading the accumulator with the contents of a memory word, whose address is contained in a pointer. The operand address is not computed until runtime. Braces are used to signify an indirect address to the operand

[@muhammadfiaz6227]

very well explain....please explain more about STL

[@vorapobautomation9760]

Thank you sir, Please explain more about STL language for other command example A( O ... O... ) AN etc.

[@SantoshDongerpure]

วรภพ สุทธิโพธิ์ Thanks for writing down in comment box.We will prepare video for all requested topics.

[@vorapobautomation9760]

Very good answer. If possible can you explain about SCL language too is everything that we should be know and in TIA Portal as well.

[@GRant16NCH]

One question .. why end video p#1.7 and Q11.7? Must be p#0.7 and Q10.7

[@GRant16NCH]

Thanks fo video.. now i understand

[@vorapobautomation9760]

This video not clear about pointer indirect addressing can you explain more and more example please maybe use datablock too for indirect addressing

[@sureshkmr602]

Superb video

[@SantoshDongerpure]

Thank you

[@El_Ouahal_Youssef]

thank You

[@SantoshDongerpure]

Thank you

[@vorapobautomation9760]

+AR1 meaning ?

[@SantoshDongerpure]

Hello Friend, Posted a video on Address Registers kzbin.info?o=U&video_id=o-9ik_373eE

[@sureshkmr602]

Address register 1. Normally CPUs having 2 no 32 bit address registers..this no will be 4 if it is high end cpu..these address registers are addressed in plc programming like AR1 and AR2..and soon

[@vorapobautomation9760]

I don't see video can you send it again please.

[@SantoshDongerpure]

Hello Friend,You can click on below link for video on Address registerskzbin.info/www/bejne/pV6cmp6VaJxmm6cyou can also click on bell icon for notifications of our new videos.Thanks for watching do share and subscribe

[@vorapobautomation9760]

Can you explain about STL to SCL convert in case of we have no SCL source file. Thank you

[@SantoshDongerpure]

Hello Friend,Converting SCL to STL should be done manually as their is no tool for it and it is possible to develop SCL function from STL or compiled version but it is not an easy procedure.For conversion you should know both STL and SCL programming apart from these re-construction will take an trial and error.Normally we should always ask a developer with SCL source file that we don't have to do any conversions.Hope you understand.If you have queries please feel free to ask.ThanksAutomators Industrial Projects.

[@vorapobautomation9760]

Can you explain about Fail safe CPU about Hardware Configuration ,compile and F-Blocks programming ?

[@SantoshDongerpure]

Hello Friend,For sure we will be doing videos on Fail Safe Hardware Configuration and its programming.ThanksAutomators Industrial Projects

[@skmbd6726]

EXPLANATIONS ARE NOT SUFFICIENT ,EXAMPLES SHOULD BE FROM REAL INDUSTRIAL PROJECTS LIKE A SMALL PROCESS,THEN IT WILL BE BETTER TO UNDERSTAND THE WHOLE CONCEPT OF POINTERS.THE THING SHOWED IN THIS VIDEO IS THE SAME YOU GET IN SIEMENS S7 MANUAL

[@SantoshDongerpure]

Hello,We prepare the video with small example explaining about the indirect addressing

[@AChikuni]

Make a lot of sense now

[@NoOne-br7bl]

I didn’t understand anything