This video is of a repair and upgrade of the recoil spring guide rod for a Sig Sauer 1911-22. I used a kit from ZR Tactical Solutions, very easy to install. zrtacticalsolu... www.sigsauer.com/ #zrtacticalsolutions #sigsauer
Пікірлер: 53
@charlesandanaylnw48922 жыл бұрын
Nice Sig - Skip- Thanks for sharing the repair👍
@LongsQuest2 жыл бұрын
Charles, thanks for watching and commenting.
@DRAGONRIDER3852 жыл бұрын
Thank you for the video. I did the ZRTS upgrade on my GSG 1911 and i like it . And i like not needing any tools to take it down.
@LongsQuest2 жыл бұрын
Hey! Thanks for checking out the video. Did you have to adjust the sights after installation?
@DRAGONRIDER3852 жыл бұрын
@@LongsQuest No but I did put a fiber optic on it. I can see it better.
@PaddyJoeCooking2 жыл бұрын
Excellent work thre Skip and awesome shooting!!!!
@LongsQuest2 жыл бұрын
Hey Patrick, I appreciate you stopping by.. Merry Christmas.
@HuntingFarmerOfficial2 жыл бұрын
Nice upgrade. You now have some silver bling for your .22 😜
@LongsQuest2 жыл бұрын
It's a fun gun for plinking
@brendanmoriarty89508 ай бұрын
nice👍👍👍
@LongsQuest7 ай бұрын
Hey! Thanks for checking it out.
@Christ-12 жыл бұрын
I went with CWA (probably before ZRTS was around). Also got their Exoskeleton slide ... Awesome upgrade! Upgraded grip safety using nic taylor yt vid and flat mainspring housing. Check out nic taylors videos.
@LongsQuest2 жыл бұрын
Sounds like a good upgrade. Thanks for checking out the video.
@MegaBait1616 Жыл бұрын
me too........
@ArchonRamie5 ай бұрын
I did the same thing. Once I had every upgrade I could buy from CWA, I ended up getting a custom CWA 2011-22, just because I had no where else to go lol.
@randytrudeau9527 ай бұрын
Very nice video, I really enjoyed it. I was wondering if the upgrade increased accuracy? Mine (stock GSG) shoots great at 7 to 10 yards but at 15 yards it starts shooting all over the place. If that upgrade would help improve the accuracy I would definitely do it but I'm afraid I'll buy them and it wont really shoot any better. If it were just the parts I would do it, but mine is the "California" edition where you have to send it in to ZR Tactical for some welding because the barrel isn't threaded.
@LongsQuest7 ай бұрын
I like the extended spring guide, but I did end up reinstalling the barrel screw; barrel had a bit of wiggle. If or when I do another upgrade it will be sights. I wish I saved the info on some I just about got; they were still with fiber optic inserts. I believe they would be more bang for the buck. Thanks for watching and commenting.
@randytrudeau9527 ай бұрын
@@LongsQuest i use Dawson Fiber optic sites on my Colt 1911 and really like them.
@eastwindfarms36712 жыл бұрын
🇺🇸🇺🇸🇺🇸🇺🇸 Nice shooting, Tex!
@LongsQuest2 жыл бұрын
Thanks Chris, that was just enough plinking to give me the fever. Hope to start shooting more after deer season.
@SlimCowboy Жыл бұрын
Cool video
@LongsQuest Жыл бұрын
Thanks for checking it out.
@callmebackfriday2 Жыл бұрын
What is the exact reason why the screw is no longer needed? Is it being block by the new upgrade? Thanks in advance.
@LongsQuest Жыл бұрын
Screw will go in just not needed, helps in field tear down, no tools need. The new tip is tapered so barrel alignment is at the tip and not the screw holding in place. Thanks for watching.
@callmebackfriday2 Жыл бұрын
@@LongsQuest Got it, it makes perfect sense. thank you for the explanation. 👍
@sherlock18955 ай бұрын
So the question is, was it worth the time and money? Cheers!
@LongsQuest5 ай бұрын
Well, I had to replace the spring guide anyway, so the full-length spring guide was worth what I paid for the kit. I did eventually put the screw back in but hope to have more time to shoot and compare with and without the screw a little more. Thanks for watching and commenting.
@sherlock18955 ай бұрын
@@LongsQuest I’m going to buy the whole kit as well for my GSG 1911 22. Thanks for the info. Cheers!
@1loadermanjack2 жыл бұрын
😎👍
@LongsQuest2 жыл бұрын
Thanks Loaderman.
@MegaBait1616 Жыл бұрын
I have 2 of these a Sig n GSG........ The followers don't keep the nose up on the .22lr. bullets on the mags.... Ive done all the upgrades possible from CWA years ago, cleaned over spray.... 6 mags all seem Nose dive time to time...... be well.
@LongsQuest Жыл бұрын
Did you do the +4 follower upgrade? I could see that causing the problem if you did not install a stronger mag spring. I appreciate you checking out the video and commenting.
@MegaBait1616 Жыл бұрын
@@LongsQuest , no.. the mags are all original....
@LongsQuest Жыл бұрын
🤔 Do the mags have much slop in and out once inserted?
@MegaBait1616 Жыл бұрын
@@LongsQuest no spring seems good.. .22's sometimes lays flat instead of pointing up.. 22's nose diving.. ftf rounds..
@LongsQuest Жыл бұрын
Mine will stovepipe now and then, usually it old amo, and when I have had nosedive I was using cheep greasy bulk amo. If you have an outdoor area to shoot I would shoot sitting on the ground resting the mag on my knee or in a position where I could have pressure on the bottom of the mag pushing it up firmly and then shoot several rounds to see if that makes a difference. Possibly something going on with the mag release. Just don't know. I do love plinking with mine. And usually if there's a problem it my fault. Hope you figure out what is going on with yours.
@robinmurphy3085 Жыл бұрын
May i ask what problems you were having to necessitate the upgrade? I have the mauser , made by gsg same as the sig. It worked perfectly 10 months now jams, stove pipes etc. Went from being great and fun to just aggravating!
@LongsQuest Жыл бұрын
The spring guide broke, jammed and very inconsistent feeding. Have you disassembled it to check things out?
@robinmurphy3085 Жыл бұрын
Yes.. i i cleaned and oiled it , tried 3 different high velocity ammos, and finally ordered the ultimate upgrage kit. I think the springs binding or week.. hasnt arrived yet so dont know if this fixed it. Thank you!
@LongsQuest Жыл бұрын
Hopefully it does
@t0nyT Жыл бұрын
@@robinmurphy3085 any update?
@robinmurphy3085 Жыл бұрын
@Tony Tham gsg replaced the slide. It was pushing the front barrel lock out of the slide because their alloy is so soft. I replaced the guide rod and spring with the stainless upgrades as well as the barrel lock and thread protector/ bushing with the ultimate upgrade kit. It's better but still stove pipes occasionally. I think its mag issues. These are very cheaply made and I wouldn't buy another. When this one dies, probably by this time next year I'll either buy the sig 322, or the fn 502. The fn is very good but comes with crap sights. For a $500 gun that's ridiculous..
@thecrow54362 жыл бұрын
Any update on screw removal? Any issues to speak of?
@LongsQuest2 жыл бұрын
Hey! 1st, thanks for checking out the video. I did put the screw back in but got about the same results. Have not been shooting as much and have been using old bulk ammo. I can even hear the difference in the sound of rounds fired. Need to test it using some new ammo.
@exno.17252 ай бұрын
what holster is that?
@LongsQuest2 ай бұрын
Blackhawk Serpa Sportster, It has been good for me. Thanks for watching.
@exno.17252 ай бұрын
@@LongsQuest thankyou, I’m guessing this fits the 1911 gov’t & clones? Also are there any magazine holders that support this 22?
@LongsQuest2 ай бұрын
@@exno.1725 I think the od of the 22lr mag is the same as the .45, recommend you verify that though.
@exno.17252 ай бұрын
@@LongsQuest Thank you, I have only just gotten this firearm and was wondering if it will fit any 5" .45 holster? if not are there any others holsters?
@LongsQuest2 ай бұрын
@@exno.1725 I think the Sig 1911 22lr is a full frame, what I understood, it was a replica of the original 1911's. It seems like I read GSG actually manufactured these for Sig. It looks like parts for the GSG and the SIG are interchangeable but I'm not 100% on that, sure would not want to tell you something wrong. I do know it's a inexpensive and fun plinker.