Sig Sauer P320 trigger, trigger bar and trigger bar spring removal

Easy way to remove trigger, trigger bar and trigger bar spring from Sig Sauer P320

[@bubbabar13]

EXCELLENT video!!! You have just demonstrated the easiest/simplest way of removal/installation of the p320 triggers/springs that I’ve seen. I hope you keep up making these excellent videos because you are very informative which makes gun smithing fun instead of being frustrating. Thanks

[@SigGuy]

Thank you for the awesome compliment. I really appreciate it. I try to do my little part and help others when I can. Have a great weekend!

[@marzancastro]

This is a video every P320 owner must save. Awesome videos, thanks.

[@doobie9550]

Great video. Swapped out the trigger in about 45 seconds after watching this

[@briancastagna9618]

Thanks Sig Sauer Guy! I thought I was screwed when I knocked that little spring out by accident.

[@af22raptor23503]

AWESOME Video! Thank you for Posting it! I just got the Apex Advanced Flat Trigger and I had looked at some of the other videos on youtube and I was thinking they were making it more difficult that it should. You Streamlined the Process Thank YOU! By the way Great call on the 320 Armorer's Block I ordered one last Friday after I saw your Video and it was here by Monday but I had to wait till the Apex showed up for me to put it to use and it does make life easier. I am new to the P320 Platform but I am liking it so far. I started with the Full Size 40 and 45 but I have am going to give the 9mm a try as a plinker.

[@jonnyknows1]

Best video I’ve seen yet! Awesome job, new sig owner here, this helped my confidence

[@SigGuy]

Love Sigs. Super easy to work on and TONS of upgrades available. Enjoy your new SIG!!!!

[@brandonstevens3430]

Great video!! Took me 5 min to replace the trigger.

[@johnmart127]

Badass. Alot of other videos showed people struggling with the spring

[@nicholaskoenig1089]

Took less than a minute to upgrade to the sig skele flat trigger. Thank you!!

[@SigGuy]

Excellent! Nice work bud!

[@JeffWrede]

Just installed my new Apex Trigger and Trigger Bar in my P320! Thanks for a great video!

[@SigGuy]

Nice work Jeff! Let me know what you think when you get out and shoot it! 👍🏼

[@vpnationtim1478]

Been a Glock fan boy for years but just got the M18. Needed to watch a few videos to learn this stuff and your video was helpful. Thanks!

[@dadbehrouhbakhsh626]

excellent and clear instructions

[@twistedink4788]

Exactly what I was looking for

[@EliteFinishOfficial]

This method works great on some trigger shoes. The shoes that have a surrounding around the part that goes into the hole of the trigger bar, make this technique not work. I ended up having to attach the shoe and bar together while installing the shoe and then attach the spring. I inserted the bent part of the spring that goes to the rear of the FCU first and then carefully brought the curved part around and under the opening for that hook to clip to. Took a bit of finger pressure, and patience, but got it on.

[@robbeeman5254]

Correct. This video was made before those triggers even existed though. Thank you for the feedback.

[@gregbolwaire2699]

Great straight forward video, not a lot of irrelevant commentary about what doesn’t matter👌

[@SigGuy]

Haha. I usually like to talk lol. Thank you for the compliment though sir.

[@danal1911]

Great video Sir! 👌🏻 👍🏻

[@Leatherneck2]

Thank you for this video!!!!!!

[@dewarner12]

This video was nicely done and really helpful. Thanks -

[@tlbfarm4473]

Sig Guy does excellent videos: No wasted verbal diarrhea, clear concise directions, no verbal diarrhea, excellent video quality and no verbal diarrhea.

[@lalo7347]

Thanks for the video! 👍🏼

[@JJGuccione]

Great VDO - Thanks.

[@nearlynormal]

In an earlier video, you mentioned keeping spare parts on hand, especially the small ones that can be easily lost. Can you post a list of spare parts you think P320 and P365 owners should keep on hand. Your videos are an important asset Sig owners. I forecast many subscribers headed your way

[@lewiskamryn6813]

you probably dont care but if you are stoned like me during the covid times you can watch all the latest movies on instaflixxer. Have been binge watching with my girlfriend recently =)

[@kashtoneric3762]

@Lewis Kamryn Yea, I've been watching on Instaflixxer for since december myself :D

[@hod8931]

Thanks for the video. I've put the complete grey guns kit in one of my 320c. My x compact has a great stock trigger but my m17 should be here tomorrow and I like that flat trigger and may have to get that apex kit

[@SigGuy]

Hod 8 I’m willing to bet you’re gonna end up getting another apex kit. 😉

[@hotpoketps3]

Dude! THANKS!!

[@mikevega7740]

Looks very helpful. Haven't shot the 320 yet but factory trigger seems mushy. May replace it

[@kmendez23]

much easier than the apex how to video. thanks

[@VictorCruz-ub9ds]

Great video! Where can I find a trigger like this or other types of triggers for my p320 M-18?

[@gringling57]

Bravo! Well done. Clearly explained and excellent visuals and close ups. I have just installed a Wilson extended slide release and ran into an issue trying to get the trigger shoe in, there is a ledge on my trigger bar which won't clear the FCU. Any suggestions @sigguy

[@gmro-ronosinski5102]

Great video!!! Can you help? I just got a new P320 X5 Legion. Will the Apex trigger bar work in this and will it provide an improvement at all?

[@marcOnline]

I love I love I love this video. Used it to install my second Apex trigger. Much easier...

[@live_fast94renzo38]

I was just looking at this setup but I didn’t see the p320 full 9mm I saw it needed the voluntary upgrade for it to work

[@eugeneasher3788]

Awesome video, very detailed, thanks 🔫🔫🔫

[@cobao5526]

thank you..just like that

[@KindredGh0st]

Thanks man!

[@SigGuy]

KindredGh0st anytime brother.

[@bryanduchane2371]

Love this APEX Trigger kit!! Have the exact same one

[@Kurogane_666]

Sorry for the reply on an old video, I'm having issues with my trigger bar spring, it won't work inside the grip, the spring likes to be askewed to the outside, it won't click or function at all, do I need a new spring

[@SigGuy]

Jonathan Wilfred Michelin no worries at all. That’s why these videos are here. I would absolutely get a new spring. I would get several. It takes nothing at all to bend these and then the trigger doesn’t work properly at all.

[@davidhudson2527]

I can only laugh at myself 🤣 when I did the drop in trigger and struggled mightily to get the short end of the trigger bar spring back into place. Like a horse's ass I watched your video after I got mine back together. 😂 Next time!!!🙏😉

[@SigGuy]

We’ve all been there brother. Live and learn right?! Make sure you didn’t tweak the spring. It doesn’t take much to render it useless.

[@mindovamattah]

Love your vids. Question..... If I bought all of the FCU parts and jig. What would you charge to assemble it for me?

[@SigGuy]

Not something I can take care of for you. Too much liability. Thank you for the video compliment though. I really appreciate it.

[@urielbaeza1]

Do you know if the apex trigger bar is compatible with the flat skeletonized trigger from sig ? Also do you recommend going with the apex trigger instead of the sig one ?

[@SigGuy]

These videos are a little old. They were made before Armory Craft developed their 320 trigger. I recommend Armory Craft triggers as they are dual adjustable and reduce pull weight.

[@aquaticsafety]

mine doesn't lift up, out and around. What am I doing wrong?

[@SigGuy]

aquaticsafety You are not lifting up, out and around. LOL. If it’s a 320 they all come out the same way. Try moving your slide catch lever as if you’re releasing the slide.

[@joeshmo4929]

CAN YOU SEE ANY POSSIBLE WAY FOR THIS MECHANISM TO DISCHARGE ON ITS OWN ?

[@SigGuy]

Nope. Not since the disconnector was added. Can’t Halle unless the trigger is physically pulled. Triggers don’t pull themselves.

[@seven1productions819]

Nice vid. Do you know if the apex trigger will fit the p250?

[@SigGuy]

Thank you for the compliment. There is no aftermarket trigger support for the P250.

[@rickcarusi4965]

Will the gray guns comp trigger kit fit in without the sig voluntary upgrade

[@SigGuy]

Nope. There are no triggers that will work without getting the upgrade. Unless you can find a older Apex trigger.

[@rickcarusi4965]

@@SigGuy I’m in Australia so it’s quits difficult to get the upgrade done although I have an apex trigger kit in my P320 that I managed to do myself My FCU doesn’t have the disconnecter like it should after the upgrade but my slide has two channels that have been machined out but not the little ramp for the disconnecter just two rather deep what appears to be factory machined channels So it’s leaving me pretty confused

[@ssagentmtzfbi]

With the apex trigger what is the pull weight reduced to?

[@SigGuy]

Reaper Gaming as stated on the Apex website it’s a percentage of your starting pull weight. Not all end results will be the same from FCU to FCU.

[@jerrylord6342]

Has anyone done a trigger replacement on the M18 with the manual safety?

[@SigGuy]

Jerry Lord I’ve done it on my m17. Fcu is the same. I posted a video on here showing the complete disassembly and reassembly. Take a look at it and see if it helps answer any of the questions. If not feel free to ask here.

[@Jae678]

Ugh this does NOT work on the legion stock bar and trigger...i may get the apex just for the ease of takedown LOL

[@SigGuy]

Jason Anziano might want to wait just a little bit longer. Armory Craft is coming out with a P320 trigger upgrade.

[@Jae678]

@@SigGuy I'll have to wait until you review that then! I just realized they're about a 30 minute drive from me, I'll have to go check them out some time