If you have a key cutting machine, almost all 1 depths on nearly every type of key will give just a slight cut on the surface of the key. If you mark all your keys with a 1 depth it will allow you to just have to worry about the depths instead of the spacing. I do this on every key I impression and it works great.
@kcet1948 Жыл бұрын
Does anyone recognize what model is that key machine?
@yrtuag6 жыл бұрын
Looks like a Versa Guard tstat cover. Ive installed quite a number of these. Usually all keyed the same. I have a bunch of extra keys where I've put multiple boxes in the houses I service. I'll send you a few if you want, you've got nothing to loose by trying it and you'll gain time if it does work. Appreciate the video. Flirting with a pair of those cutters myself 😎😎😎😎
@azskyking65422 жыл бұрын
I always start with a CH751. It's far too common. Then a handful of test keys I have. Then I see about impressioning keys. Thanks Jason
@WilliamMancel6 жыл бұрын
Nice visual decoding. That Lishi looks like it's perfect for someone like myself, who doesn't have a key cutter, and only cuts keys for challenge locks. Better than hand filing every cut.
@AquaTech2253 жыл бұрын
Thinking the same
@gjacobson763 жыл бұрын
I am planning on using the Lishi cutter to make sets of depth and space keys. That's a poor mans code cutter. Lol
@mal13able4 жыл бұрын
eXCELLANT WORK with the Lishi,i cannot wait to use the one i ordered,good video as always!
@Arachnoid_of_the_underverse6 жыл бұрын
Very nice tutorial on how to make keys thanks for sharing Jason
@bird7186 жыл бұрын
Lishi Cutter, now that was educational
@gjacobson763 жыл бұрын
I just ordered a Lishi tool!
@KingStreetRob6 жыл бұрын
Hi Kim... Glad the Lishi is working out for you Jason.
@francoisbelangerboisclair5 жыл бұрын
My first try will be the CH751. Most of them are coded the same.
@AquaTech2253 жыл бұрын
Was about to say the same. Though I’m sure he knows that it’s more showing that it can be made by sight I guess
@WRWhizard Жыл бұрын
Like learning the technique, but that lock is one of the major keyed alike locks. Every single one of those is the same. I am an HVAC tech and I've had that key for years.
@selock Жыл бұрын
yep, it is but turning a precut key in a lock doesn’t really pull in the views or teach anything 😂
@bobbykeyz12636 жыл бұрын
That was awesome brother. I had one of those the only thing I didn't like about it was the way it warped the key a little when cutting it.
@selock6 жыл бұрын
Bobby Keyz it’s definitely a left handed model...or something :)
@BD90..6 жыл бұрын
What was the hardest thing for you when learning to be a locksmith. Would be cool to talk about your experiences as a apprentice locksmith or trainee locksmith. I think the hardest part for me would be trying to remember all the different types of key blanks and what they are for in the first year of locksmithing.
@waynegrant17125 жыл бұрын
@@51-FS Sorry, locksmiting is not something you're born with, it is a learned experience. It is not abstract, intuitive, or metaphysical. Also, it is not an ego-trip. BlackDolphin90's question is a valid one.
@RMSecurityGroup5 жыл бұрын
@@51-FS I think its both, learn some have some innate mechanical ability
@lmars59336 жыл бұрын
Nicely done my friend I have a Lishi great for small rekey.thanks for the Great videos buddy. 🌟🌟⭐🌟⭐😎
@LockPickingCoalMiner3 жыл бұрын
Really awesome video thanks for sharing.
@johnrossell32015 жыл бұрын
Otoscope works good
@pouncerminned8633 жыл бұрын
Hi what is the measurement or angle that the ceiling 14MC produces on the key blank? I’m working on making a key cutter tool for the lishi and working on kw1 and I’m confused on the angle and flat measurements. Do u know by any chance?
@pauleyedwin6056Ай бұрын
Good video
@bearsback50996 жыл бұрын
Very nice job my friend.
@luiscastellanos62442 жыл бұрын
Thanks a lot
@rajaqassim26064 жыл бұрын
sir how to make right pins mark
@Frosty9016 жыл бұрын
Nicely done buddy!
@selock6 жыл бұрын
Frosty901 thanks :)
@jeffmoss266 жыл бұрын
good stuff!
@Raven-qj9gv5 жыл бұрын
Have you but schlage keys with this ???
@jamesgentry59264 жыл бұрын
There should be a retaining wafer in the back to pull the plug
@selock4 жыл бұрын
James gentry not on all small locks :) only some
@dvismelchor69024 жыл бұрын
How much would that work cost?
@presidentadrian6 жыл бұрын
Dayumn.... How many different model key blanks do u have to stock?
@selock6 жыл бұрын
hackerseven 12. Exactly 12
@Hunty61365 жыл бұрын
Nice Informative Video Thanks
@peterdambra63876 жыл бұрын
Nice Job Jason. But these cheap locks aren’t worth the time. I bought what I believe was a lot of 10 with two keys each for like $15. Just to have on hand when these little jobs pop up.
@selock6 жыл бұрын
Peter D'Ambra they seem to be only a handful of codes, I did try the one I cut before but it wasn’t it. So now I’ve already got two :) I’ve gotten pretty quick at doing this so really for the cost of two blanks and 2-3 minutes (using my code machine, I only used the Lishi for video reason) it’s actually more profit/less extra stock in doing it this way. Also these are pretty limited on codes anyway, I’ve added this one & the last one I did to my tryout keys ;)
@chevylandt.v4 жыл бұрын
Does the key cutter work on padlocks and house keys?
@selock4 жыл бұрын
Chevy Land T.V yep!
@chevylandt.v4 жыл бұрын
@@selock ok thanks I would like to try it.
@superpooper_20305 жыл бұрын
Very interesting and give a like
@kalpeshrathod1223 жыл бұрын
Good
@RubberBanned6 жыл бұрын
How ya liking that key cutter?
@selock6 жыл бұрын
RubberBanned already way paid for itself, very convenient!
@jeepstermario99126 жыл бұрын
SORCERER. jk great job
@selock6 жыл бұрын
Jeepster mario I’m like Dumbledore without the wicked beard 😂
@jeepstermario99126 жыл бұрын
SE Lock and Key Your a Locksmith harry.
@miguelandrade11553 жыл бұрын
Very good!😲
@forric235 жыл бұрын
Is this where the comments go? Asking for a friend :D :D
@selock5 жыл бұрын
Urbansumo NO
@doppelganger3104 жыл бұрын
where can I buy one locally u.s
@AquaTech2253 жыл бұрын
Not sure about locally. But eBay I’m sure someone in the states is selling it
@doppelganger3103 жыл бұрын
@@AquaTech225 thnx buddy i did find one on ebay but from china and arrived in 2weeks pretty fast for china... i looked local and came up short every time... this is a great tool ive made 5 sets of 2 master lock keys for the propane cages at work using the cutter and a rotary tool to get it perfectly matched.. im tryn to hand cut a ignition key now.. failed twice ..but its not as easy as normal keys .
@justaguy4275 жыл бұрын
Probably a 501ch key.. LOL
@MrKenstar23 жыл бұрын
What does that cost?
@selock3 жыл бұрын
The tool or the service? The tool is like $35-50 the service was about $85