[SIGMA fp] Minimum configuration for CinemaDNG shooting

I thought of the minimum configuration for shooting 4KCinemaDNG with SIGMA fp.
Although it cannot be used for long-term shooting, it can be used for street snapshots without any problems.
Handheld video shooting with SIGMA fp is a battle against camera shake
Note: This is different from the normal usage of SSD. Use at your own risk. Please be careful when using this as a reference.
#sigmafp #CinemaDNG

[@Ansonandco]

Thanks for this information. I just bought this set up and clocked at 16 minutes at UHD 12bit 24fps. I was using it with the EVF-11 and so it’s possible removing the drive from the heat of the camera could help

[@_asagimadara]

Thank you for introducing the channel!

[@MB-lt4pp]

やはりかなりの発熱がありますよね。このＳＳＤは樹脂ケースだと思うのですが、 放熱フィンの効果があるのですね。樹脂では、低い熱伝導率だと思うのですが。 自作パソコンでM.2 SSDをつける際に、SSDの放熱フィン接触部分の紙(？)ラベル の熱伝導率を気遣い剥がしているので、今回の立証実験結果に驚いた次第です。

[@_asagimadara]

コメントありがとうございます SSDは、樹脂製でご指摘の通りかなり放熱性能が良くないですね。メーカーが想定している使用方法ではないと思うので、しかたないですね。

[@MrPighow]

Thanks for creating this video. It's interesting to see a different SSD approach. As for shake, have you try Lumix lenses with OIS? I have found it useful for CDNG recording.

[@_asagimadara]

Thanks for your comments. I have not tried LUMIX lenses.　I would like to try them if they are effective for camera shake.

[@jmssun]

Maybe tear apart the shell for the USB adapter and storage drive, then put on the copper fin.. but you might want to just try an USB-C drive

[@_asagimadara]

Thanks for your comment. I'll give it a try next time.

[@TheReelport]

Cool, i was looking for this. Did you test long recordings yet? Like 60mins+? I would be also interested to see how the port could be protected. Sigma has its own port protector, would it fit? And thank you!

[@_asagimadara]

Thanks for the comment! The 12-bit DNG recording stops after about 3 minutes. It stops due to heat. If I use MOV format, I could record for a long time. If you use the port protector, it seems to work if you use a straight-compatible extension connector

[@robertpaterson5477]

ooh nice

[@LWJCarroll]

Hello, fyi you may be interested in the Tokyo KZbinr Virtual Japan as he has just setup himself with the Zoom F3. With his Sony full frame camera, but I don’t know which mics he is using. I found your channel a few days ago regards the Zoom F3 and I also have a Sigma fp camera. Just a hobbyist here. Regards. Laurie. New Zealand. 😊

[@_asagimadara]

Thank you for your comment. I watched the Virtual Japan video. Many beautiful images and informative!

[@TheGoodContent37]

Hi! How about recording 1080p 12bit? Does it handle it fine or similar to 4k?

[@_asagimadara]

Thanks for your comment! It is possible to record for long periods of time in 12bit if it is 1080p and not 4K.

[@normski1400]

I tried a 1T flash drive. Camara didn't read it.

[@_asagimadara]

A possible cause may be that the adapter standard for the connection is not compatible with high speed. I am using a 10 Gbps connector

[@colingregg]

Do you have a link to the heat sink. Thanks.

[@_asagimadara]

The heat sinks were purchased from a PC shop with a suitable selection.

[@LWJCarroll]

Thanks this was interesting to see. Laurie. NZ