Here we're taking a look at Sikaflex 291 Marine Adhesive, pack sizes available in the UK and looking at some tips for how best to use and store the product.
Пікірлер: 50
@tometheus9315 Жыл бұрын
Would this be suitable for a motorhome roof ? I purchased the sikaflex 522 although debating to use this now? Thank you
@sayyestonewvanventuresАй бұрын
Thank you for this Handy video ❤
@brettmcmurchy1303 ай бұрын
hi, I'm thinking if put some sealing tape over the sikaflex to reduce UV exposure it should increase its life span significantly, right?
@jamesvaughn29735 ай бұрын
Yes, I was wondering about the best caulking that you can think of for an aluminum boat, but the caulking will be done for about that will be going underwater where the caulking is and I would need to be able to paint over the caulking, preferably white what are your thoughts please?
@redbeardmuaythai69688 ай бұрын
What's the average cure time. Its on a panel on my camper van outside. Its end of January. So arounf 5 to 10 degrees Celsius.
@bbhuchuk2 жыл бұрын
Will it bond aluminum together
@geronimopascuale9208 Жыл бұрын
What is the setting time for the Sika 291 Lot and it can be tool as the Sika 1A? also. What is the diference between the Sika 291 Lot and Sika 1A? Cheers
@arnehayn43542 жыл бұрын
Is there a difference between 291 and 291i?
@anneogilvie66572 жыл бұрын
Is this goof for fixing a spa filter that has come apart?
@stevegillman19992 жыл бұрын
Hi. Thanks for the video. Is Sika 291 i available in brown? I'm having great difficulty in locating any.
@richardkirkwood93542 жыл бұрын
What is the shelf life of unopened products, various configurations?
@allanmartin6342 жыл бұрын
Hi do you recommend 291 for skin fittings, I guess with 208 cleaner and 205 primer?
@gearhed78 Жыл бұрын
Seeing my comfortable retirement in the amount of full Sika boxes in the background. When are you guys closed and nobody is in that building? lol
@pogo30pago3 жыл бұрын
What a great video!
@SamOnABikeSweden4 жыл бұрын
Is this usable to mount solar panels on a caravan? Or is Sikaflex 252 better?
@marineindustrial43343 жыл бұрын
Sorry for the late reply!! Yea this would be great for that sort of application, good surface prep though and pre-treatment using Sika Aktivator 205 for best results
@coskunbahceci3 жыл бұрын
@@marineindustrial4334 Sikaflex 291 or Sikaflex 252 ? Which one is usable solar panel?
@marineindustrial43343 жыл бұрын
@@coskunbahceci both would work perfect well
@patrioticjaustralia4679 Жыл бұрын
Will it adhere to HDPE?
@xaf433 жыл бұрын
Can It use for small fissure on a tire?
@xaf433 жыл бұрын
No?
@jeanmitchell89492 жыл бұрын
can you paint over it
@SNEVIC3 жыл бұрын
Hi Sir, do you advise this product to bond fiberglass with rubber?
@marineindustrial43342 жыл бұрын
Generally speaking, yes. However… there are countless types of rubber on the market, for any critical applications we would always recommend testing first. If you have a big application Sika can always run tests and recommend any pretreatment requirements.
@steveandnaz3 жыл бұрын
What is the difference between 221 and this 291? Thanks!
@marineindustrial43343 жыл бұрын
They’re similar products for different industries. The 291 is prt of the I-cure family making it more friendly towards DIY as the VOC’s are lower than say 221. Also 291 has been tested for use within maritime construction and as such carries the wheel mark accreditation.
@ChasingRiver3 жыл бұрын
@@marineindustrial4334 Thank you. 291 is different from 291i right?
@marineindustrial43343 жыл бұрын
@@ChasingRiver sorry should have been more clear 🙈 291 was phased out in the UK around 5 years ago in favour of 291i, it was due to changes in legislation not allowing the old formulation to be sold in the DIY market without a pair of gloves. SIKA deemed this wasn’t a very practical solution so decided to reformulate and reduce the VOC content
@ChasingRiver3 жыл бұрын
@@marineindustrial4334 Very interesting. Thanks.! I wish they would sell 291i in other countries
@marineindustrial43343 жыл бұрын
@@ChasingRiver where are you based?
@kenniffss2 жыл бұрын
Does sika have an adhesive that will bond a 3mm sheet of hdpe to a Plywood backing? Sheet is 1200x600mm.
@patrioticjaustralia4679 Жыл бұрын
Did you find a product?
@kenniffss Жыл бұрын
@Patrioticj australia not for a reasonable price no. Ended up using a 3M industrial double sided tape.
@rxonmymind83624 жыл бұрын
Will this work on Hypalon boats?
@marineindustrial43343 жыл бұрын
Ideally you would want to use a contact adhesive like Bostik 2402 for hypalon
@user-bl1eh2qs9o2 жыл бұрын
In my opinion, 18 tons per m2 is very weak. 18000 kg : 10000 cm2 is only 1.8 kg per cm2. High Tack from "Den Braven" has a tensile strength from 22 kg per cm2
@RogerFrigola2 жыл бұрын
They got the maths wrong: 1.8 MPa is about 18 kg/cm2
@marineindustrial43342 жыл бұрын
You beat me to it!
@aaronowens10263 жыл бұрын
How heat resistant is this
@marineindustrial43343 жыл бұрын
Service temperature range is -50 to 90 degrees C. You can go up to 120 degrees C for up to 4hrs or 140 degrees C for 1hr
@skipper13504 жыл бұрын
Compatible with aluminium?
@cosmicbrah86693 жыл бұрын
yup
@marineindustrial43343 жыл бұрын
Absolutely, but remember aluminium oxidises almost as soon as it comes into contact with atmosphere so a good scratch up using 3M Scotch Brite then clean with SIKA Aktivator 205 and stick your components down straight away
@FrancoUngarelli Жыл бұрын
Non si può parlare in italiano?grazie
@cintulator1129 Жыл бұрын
Sika is a 🐖 in Finnish
@danieltseperis-edokaitora16572 жыл бұрын
Is this sealant UV resistant? Can it be used on the deck exposed to the sun?
@marineindustrial43342 жыл бұрын
All these PU adhesives are organic and as such will degrade after prolonged exposure to UV. Generally their tolerance can be measured in multiples of years service life making them suitable for outdoor applications