Silhouette Cameo 4 PRO 24in Vinyl Cutter Unboxing and Setup

[@roderickwilliams3988]

Thanks!

[@threadchemistry]

You're very welcome! Thank YOU as well!!

[@renaerenaethebiohacker3628]

Great info. Would like to see another youtube using this new cutter.

[@threadchemistry]

Well then I shall do that for you!! I'll let you know right here when I get it up! Thank you biohacker!! ))

[@misplacedmoralsclothingcom1509]

Definitely Digging the 24" wide!!

[@threadchemistry]

YEEES!!! What a game changer!! I may have just gradually gotten used to my 3 getting old over time, but this 4 is amazing. And the extra 12" is just a HUGE bonus!

[@gemini022]

Thanks for this I got one for Christmas last year still in the box . I was going to sell it because ) doesn’t cut wood as advertised)

[@threadchemistry]

Absolutely. Thank you.. fyi, it as a good thing you're not going to keep it. I've ran into several problems with them that aren't just issues on my machine, but many.. thanks again!

[@RonThompson]

Idk for sure cause I don't have a 4 Pro but I've heard and seen people say the blue holder is for cameo older blades that are for cameo 1-3s I have 2 Cameo 3s and eventually get a 4 Pro. Good videos 👍👏

[@threadchemistry]

Ahhhhh! Very nice. That's for the advice I'll give that a go!

[@ludwigryan69]

It also says that the 4 (any model) is 3-4 times faster than the "previous model" as in the 3 I believe. That's crazy fast!!

[@threadchemistry]

This bad boy cuts through vinyl like it's its job!! (No pun intended) hahahah.

[@kawaiicreationsinc198]

I’ve heard bad reviews on this. I’m on the fence should I get this or the plus. I really want the 24 inch but the 15 inch has way better reviews. If the pro is workable I will spend the extra money and get it but if I will have to return it within a week I rather save my time

[@threadchemistry]

Do NOT buy the 24 inch. It has so many problems. I've been trying to get a new video up about it but you're right. Nothing but issues!

[@kawaiicreationsinc198]

@@threadchemistry I got it on Amazon it should be here tomorrow to see. I’m mainly going to use the Mat and so I can do larger print to cut. Amazon has 30-60 days return period so if anything I will return it if it doesn’t fit my needs and go with something else. Looking forward to your other video about it

[@threadchemistry]

@@kawaiicreationsinc198 It's not about cutting with the mat. Somewhere they really screwed up on the software side of things. If you cut anything larger than about 12" it just completely messes up. So if I were you the first thing I would do would be to cut a full width design, using as little vinyl as possible. you will know instantly if yours will work or not. I've talked to multiple people who have had the same problem. 1 lady said she went through 3 warranty replacements before she got 1 that worked. So there are some out there that do work, just doesn't seem to be many. So just FYI that's where I would start if I were you so you know right away.

[@kawaiicreationsinc198]

@@threadchemistry for sure ! I’ll try it out this week and let you know an update . I was lookin at the siser Romeo 24 but no review really and people said the software was really in beta for right now. Plus that 700 price tag

[@threadchemistry]

Ya let me know what you find out. I'm interested to hear another review. I hope it works out for you though! Good luck!

[@andypaine7121]

Could always buy a Graphtec?

[@threadchemistry]

Ya for the price though the graphtecs just don't make financial sense in comparison.

[@michellecicurel3040]

The cap comes off the blade so you can clean out the bits of junk vinyl that gets caught in it. Have a look in your 3 I bet it’s full 🙂

[@threadchemistry]

Oh you mean when using that manual blade adjuster? That's why you would want to unscrew it, to clean it?? Genius!! I've always just bought new blades. I bet I have 20 blades for the 3! Bahhaah. Thanks so much!

[@michellecicurel3040]

@@threadchemistry exactly! Also check the little hole on the left where your blade taps to adjust as this gets junk in it and also stops the adjustment from being accurate. Ooo and if you loose that white piece the spot on the left side of the machine near where the mat loads is also for undoing and tightening up the cap 🙂

[@threadchemistry]

Thanks so much!! I did know about the hole. Im not sure whats up with that issue. However, it's going to have to be an issue I have to live with for now because this PRO is garbage! There's so many issues with it that I'm seeing others have also. So depressing bc I really like cameos even over the more expensive ones. Plus now I can't return it apparently so this is a huge disappointment.. Anyway, thanks for all your help!

[@billwatcher9321]

This is funny. Those 24 inch cutters never made it to the market. They were a failure and pulled.

[@threadchemistry]

They didn't make the market? I don't even know how to respond to that. Where do you think the one in this very video came from?