Hey Mel, I like to think of myself as a super solver. When there is a problem, I find a way to solve it. So, its too heavy for the roller you say.🤔 My solution would be to try something like the following... ▪︎Place the rollers in place as if you were going to put your 150ft. Vinyl on the feeder. ▪︎Next remove the long bar that holds the roll in place. ▪︎Position the roll - as if - you were loading it but instead get (3) table clamps that are under 12" and have a thick head like the ones I link. ▪︎Space them out evenly and clamp each one at the edge of the table horizontal to the feeder/machine. ▪︎Next, load the vinyl and allow the roll to rest against the clamps. ▪︎For added security, gently clamp the long bar to the table and allow the roll to rest against the bar. If there were a way for me to show you (virtually) or draw and send a diagram to you, i would be able to show you what i mean. But the set up im thinking of will keep it in place so it won't roll off the table yet it won't harm the feeder so you can use with standard smaller rolls. Table clamps can be found for as low as $3.00 across the internet. So this is not a costly solution. Sample of table clamps - ▪︎www.harborfreight.com/4-in-ratcheting-bar-clampspreader-68974.html ▪︎www.harborfreight.com/8-in-handscrew-clamp-60550.html ▪︎glamcor.com/products/table-clamp-mount-any-model-light-cyber-monday-sales?variant=40455857874&gclid=CjwKCAiAnIT9BRAmEiwANaoE1XmnVeNUPzBKwqdWb_G0dC6lA-GsAwDJHEZDKeNFjdyLi1SRX9nJdxoChqsQAvD_BwE Thank you for your time. 🤗
@bigvinyldreams94624 жыл бұрын
Love your content, so informative! Really disappointed to see how many views on this video and the shockingly low number of “likes Come on people- Melissa does so much to teach us to help us no matter if you’re just crafting or starting a small business SHOW HER SOME LOVE for crying out loud!
@RDIdecals3 жыл бұрын
This is a great machine, I have used cameo 4 ( 12 inch ) and I was impressed with what you get for that little money. Truth to be told, we would not be able to keep up with our customers without our Graphtec CE6000-60. I still think getting a Cameo is a great way of getting in this kind of business before making a big investment. Very informative video 😎🙏.
@SilhouetteSchool3 жыл бұрын
Thanks for sharing
@racquel3483 жыл бұрын
Thanks Mel!! I just purchased my big rolls and had no clue how toload the darn thing. hopped on here and in 2 mins...BOOM its all good!! Maybe show a close up of the roll in roller but i assumed what you did and it worked! LOL. Thanks as usual you are the BOMB!!
@love1nallgivespower923 Жыл бұрын
Just order from Swing today. I’m so glad to hear you say the name of company. It has made me feel better. Thanks
@SilhouetteSchool Жыл бұрын
LOVE Swing Design. I have worked with them for years.
@charitzascreations3 жыл бұрын
My machine finally came in the mail today 🥳🥳🥳
@ttoddh12 жыл бұрын
OK I am going to buy one just so I can get one to play that tune!
@gmfigueroa73 жыл бұрын
first time user and ordered the pro. maybe i should have ordered the 15" to start with
@anthorana13 жыл бұрын
Big learning curve!
@thatonegamer27093 жыл бұрын
Not sure if im just stingy with my vinyls but man! All that outter edge vinyl i wouldve used to do plenty of mid designs
@dianneforbes9948 Жыл бұрын
I’m new to silhouette love this video
@bit-studios14 жыл бұрын
My silhouette pro will be here in two weeks. Can’t wait for it to get here. So glad I ordered it before it sold. 😊
@neffy12194 жыл бұрын
Please where did you buy from? I'm trying to buy
@bit-studios14 жыл бұрын
@@neffy1219 I purchased it from the Silhouette website at www.silhouetteamerica.com/featured-product/cameo-pro?aff_id=jTixjvN3$ewxNQ25RMmauA
@ilenemartin53303 жыл бұрын
I want this model and the rotary blade to cut fabric so that I can complete my customers' quilts faster.
@Mafia-wf9mv10 ай бұрын
D1 yapper right here
@SilhouetteSchool10 ай бұрын
Feel free to put it in 2x speed..I heard it makes it even more enjoyable
@lorijohnston52732 жыл бұрын
Thank you so much for this information. This helped me decide if I needed the Pro or Plus. Thank you!
@ericcheung73239 ай бұрын
Can I print 12 inch paper from this 24 inch printer? Thanks. You answered the question in 6th minute
@SilhouetteSchool9 ай бұрын
This is not a printer - it's a cutter so it does not print. However, yes, you could use 12" paper in this 24" cutter.
@kerry4647 Жыл бұрын
Hi, thank you for your video on ht e Cameo 4 Pro, there aren't that many out there. I have to wonder if this is because it's not actually a good machine in the long run or maybe there is a better alternative out there now. Could you tell me if it is still a buy, or possibly do a 'update video' on your experiences etc? Thank you. I really appreciate your videos because they are always honest and in-depth. Thanks again.
@SilhouetteSchool Жыл бұрын
Hey there! Check out this blog post! www.silhouetteschoolblog.com/2020/11/silhouette-cameo-4-pro-review-pros-and.html
@SilhouetteSchool Жыл бұрын
I would probably go in a different direction if you are looking for a 24" machine - one to consider is the Siser Romeo. shrsl.com/45ta7
@beckiweeks71613 жыл бұрын
Hubby got me one for Christmas !! Can't wait to play with it !!
@Marympd2414 жыл бұрын
Okay, I have been a Cricut lover for years and have recently, thanks to work, been introduced to Cameo and the Silhouette Studio design program. I'm still new and not comfortable with it yet, but what I am seeing so far has me very conflicted about Cricut. Any other Cricut users out there switch and do you love it?
@traceybartlam59404 жыл бұрын
I love my Cricut and wouldn’t want to change based on how well it cuts and it’s versatility however it’s being let down by Design Space at the moment which is a shame. I’m hoping they sort glitches soon because my Maker is amazing
@rd-gi6jw3 жыл бұрын
@@traceybartlam5940 I fully agree with you. As for the Design Space, I don't use it very much until the last phase when I import my work, resize, multiply, arrange, etc. and then send to cut or print to cut. I mostly do all designs myself but in a third party graphic design program. No hassle at all. I'm weighing Silhouette for some time but except bigger size (Plus and Pro) I still cant find proper reason to move from Cricut or work with both. I often hear people complaining about Cricut but except issues they have with DS, they seldom state other reasons. I think anyone who wants to approach this business professionally must learn at least one another design program.
@MIDEVOL14 жыл бұрын
I'll fabricate a stand with a strong roll feeder to hold the massive rolls when i get mine 😁
@csiles4 жыл бұрын
Been watching you for years... when are you gonna upgrade your camera?? I still love your fussy videos :)
@deckor88decorates193 жыл бұрын
PHUHAHAHAHA
@kabd10163 жыл бұрын
What was the point of that? Your delivery was rude. But she is giving great information in her video,, so why knock it?
@izzysgamingchannel81832 жыл бұрын
@@kabd1016 because some people like to see things in vivid detail. Fact is the world is going forward, more empahasis is placed on the production quality of youtube videos. It would be in the creators best intererest to keep up with the competion. If you accept commedation you should also be receptive to critiques, right? There is nothing rude about telling the truth, people who want to see you to well tell you the truth so you can grow
@epbluestar37323 жыл бұрын
You are so fun just got my machine. I’m so excited to try it
@SewCool-Ideas4 жыл бұрын
My husband buy me cameo 4 plus 2 weeks ago, I didn't use it yet, I want return and buy this one!!!
@wykeilanicole68014 жыл бұрын
I did too! So mad!
@misterharlem48103 жыл бұрын
Don't buy the 24 inch, its not working for me at all.
@jaimecowan4903 жыл бұрын
@@misterharlem4810 you are an anomaly.
@sequillawilliams88094 жыл бұрын
Ok omg did that roll just auto feed ??? I have all the other silhouette machines but I recently just bought the portrait three and I must say at this point I am reaching for that more than my cricut the upgrades have been amazing so at this point I'm really excited about this machine
@meaganroloson7234 жыл бұрын
I have the 15 inch and it auto feeds with the new update.
@elevated-apparel4 жыл бұрын
I would be worried about the tracking with a 24" cutter. This is where us professional look for in wide format cutters. The design to cut from the front is stupid. When you go to cut say a wall decal say 23" x 45" will it track. You need a catch basket also. My graphtec will auto feed the length then pull it back in as it marks and grips the vinyl. I buy vinyl in 50yd rolls to save money. That roll holder won't hold it.
@lisadecaire45922 жыл бұрын
Could you do a live video to show how you set it up on your sihouette studio? like all the settings you used etc... I'm trying to figure out which vinyl to pick to use for cutting and the force and the speed? no where does anyone explain this. I'm very new to Cameo so any videos to show how to set things up on the studio would be awesome!
@SilhouetteSchool2 жыл бұрын
This explains it. www.silhouetteschoolblog.com/2020/11/first-cut-with-24-silhouette-cameo-pro.html Almost all of my videos on KZbin are replays of Facebook Live videos I have done. For this reason it's very hard to show software tutorials this way. I have hundreds of exclusive, posted-edited software videos, however, on SilhouetteU.com if you are interested.
@melaniesanchezmonroy26654 жыл бұрын
This video is the best❤️ I’m from Colombia, thank youu!!
@anthonyguerriero1033 жыл бұрын
What is the best wide format printer to go with the pro 24 inch....which I am patiently waiting in line for by the way you were my me and my wife like a soda can that's been shaken in fizzing all over the place
@SilhouetteSchool3 жыл бұрын
The wide format printer I use is linked in this article here: www.silhouetteschoolblog.com/2020/03/how-to-print-and-cut-on-wide-format.html
@katihernandez70804 жыл бұрын
Can you PLEASE do a video on cutting faux leather sheets, the settings etc for earrings and bows
@livondawilliams45253 жыл бұрын
Wow I want to buy this today just have some questions, like can it do small jobs also like T-Shirts like change the settings to a smaller measure and does this one still cut the Rhinestone cut?
@livondawilliams45253 жыл бұрын
Whew ok you’ve answered the sizes great!!!! One more the cutting can it still do Rhinestones?
@lettymorales85734 жыл бұрын
I will stick with my cameo 4 and I was exited about this but NOPE! I still like me cameo 4. Hate to waste. !
@idadejesus19524 жыл бұрын
Wow that's great thank you your great love your videos
@AntonCartel4 жыл бұрын
Why don’t you put the machine on the heavy pink thing you used to weed the vinyl & use the table to sit down so you could weed the vinyl more comfortably. IDK just a thought. But I like your presence & your voice even w/ the noise the machine makes🙃
@anaramirez98133 жыл бұрын
hello, can we see the mat you made and how did you make it?
@SilhouetteSchool3 жыл бұрын
The 24" mat comes with the machine!
@lettymorales85734 жыл бұрын
Thank you for all the information. Very informative.
@Rachelwagner153 жыл бұрын
Can you cut longer than 24 inches with the roller feed?
@SilhouetteSchool3 жыл бұрын
Yes! You would just need to do it without a mat.
@fernandolanderos46003 жыл бұрын
Trying to choose between this pro or a plus. Don't mind spending the extra money for a bigger machine. I might not need a big cutter like this. Idk
@thomasnalley37683 жыл бұрын
I am really on the fence about whether to get the pro or the cameo 4 plus . I want to use this for t shirts and for creating large stencils for wall hangings . Some as big as 6x3.5 foot . Really don’t have the space for the pro and figured for the larger designs I could just split them into two parts. What would you suggest?
@susandevlin98103 жыл бұрын
Can you cut fabric for appliqué with this. I am working on a wedding quilt with a silhouette of a bride and groom that are approx 36 inches long
@mackgemmell33152 жыл бұрын
What program do you need to use your own designs please
@SilhouetteSchool2 жыл бұрын
You can import your own designs into Silhouette Studio :)
@victorias30483 жыл бұрын
More videos on the cameo 4 pro. I’m having so many problems with mine. I don’t want to give up and return it....yet
@laylamayarthur82443 жыл бұрын
what problems are you having ? Im thinking to buy one so would love to know !!
@roccosorrentino27763 жыл бұрын
@@laylamayarthur8244 Give it up! THe mat slips and you can't do a bigger print and cut because the cardboard keeps on getting stuck everytime the machine attempts to read the registration marks
@omayraministry3 жыл бұрын
Can you please do a tutorial for cameo 4 pro? For print and cut for tshirts using easysubli. Been having a 1/16 white boarder showing. And like to know if its a software glitch.
@drlnmfr14 жыл бұрын
Can’t wait to get mine
@teresarucker41993 жыл бұрын
This may sound crazy but my machine loading arrows are on the right and yours are on the left .? Are they made different or am I just seeing it backwards or what ?
@shirleyrabenold4613 жыл бұрын
I was thinking the same thing.
@Mrscreative474 жыл бұрын
Going to preorder mine
@brahimmzoughi50623 жыл бұрын
like cameo machines on small format . is the pro one better than the standard professional cutter for an intensive work , like roland bn20 for exemple
@aplusprintshop2 жыл бұрын
the video is Horizontal flip. Lord if you didn't hear her say that... try not to install the roller holder backwards Lol!
@heathercurry12142 жыл бұрын
Help! I can't figure out which Cameo 4 I want I currently have the Cameo 2 and want to upgrade. I keep going back and forth between the Cameo Plus or Pro. I want to be able to do more with the machine I currently just do tshirts, earrings and decals.
@SilhouetteSchool2 жыл бұрын
I would recommend the Plus
@thenewseinto4 жыл бұрын
Amazing video! I was wondering about the print part. Even though the machine is "big", people kinda forget that you can cut a lot of materials when you have 5 kilos of force. I'm looking for it in the near future, my mind can't stop thinking in a lot of package prototyping and leather cut.
@scootchieandboo74754 жыл бұрын
I want it sooooo bad.
@Born2Wander3 жыл бұрын
Hi There, are you having issues with vinyl sliding without mat sideways during cut, I see that happens on long cuts especially straight box lines over 45” one side and returns on other side vinyl goes sideaways. Otherwise it cuts ok from roll, I haven’t used the mat. I think most 24” models were sent with defective auto blade version 2, support is sending me new blade, did you get yours and hope it resolved it? I hope it works with other blades. Did you find other solutions?
@shirleyotero1846 Жыл бұрын
Does this machine do print and cut Also?
@SilhouetteSchool Жыл бұрын
Yes you can! As wide as you can print (up to 24"), you can cut.
@plumagolden Жыл бұрын
Hi Melissa, could you pls tell me the speed and pressure you used to cut this vynil without the mat?
@SilhouetteSchool Жыл бұрын
I usually cut vinyl with a force of 14, speed 8
@plumagolden Жыл бұрын
@@SilhouetteSchool thanks a lot
@BuenasNuevasMagazine3 жыл бұрын
I bought this machine at Michaels, the had plenty in stock. I do have a question the center supporter rolls don’t make contact with the material is that normal for the machine. Sometimes when I cut HTV it tends to move in the center because there is no support.
@SilhouetteSchool3 жыл бұрын
Hi there! Check out this blog post: www.silhouetteschoolblog.com/2021/07/how-to-load-vinyl-in-silhouette-cameo-4.html
@anthorana13 жыл бұрын
Im starting to regreat my purchase of the Cameo 4 Pro. Mat keeps moving, haevnt gotten a proper cut. And its real slow.
@misterharlem48103 жыл бұрын
I agree, I want my money back asap.
@deanndover38283 жыл бұрын
Wow good to know . I have cricut but I feel I should upgrade when my cricut design space isn’t working
@anthorana13 жыл бұрын
@@deanndover3828 I do believe that you wont need a 25in machine and if you do, there are way better options on the markets (faster especially). This is real slow. Now, on the other end, I do believe thi sis a great machine for small cut max 12-15in wide and small production. If i could, I would return and get a 15in Cameo as I def can t use it as a 24in.
@joshuablizard43773 жыл бұрын
Let's make a deal! 804-299-9497. I have a brand new Maker with every blade and kit and accessory available but I need that 24" !!!
@anasyukr3 жыл бұрын
have you try without using mat? what paper did you use? I'm planning to buy pro. thanks for sharing
@norinemueller45884 жыл бұрын
Looks great. I have no use for something this big was wondering if the cameo 3 can be found anywhere I have the 2 now thank you
@marquehulbert1724 жыл бұрын
you can try ebay saw one there about a week ago
@norinemueller45884 жыл бұрын
@@marquehulbert172 thank you
@laylamayarthur82443 жыл бұрын
I would really love to know if you have tried to cut paper the pro, as I only want to cut paper on a cutting machine and cant decide if I should go for a silhouette or a Cricut !! Have you had any problems at all with the pro, as it is such a new big size? Like you mentioned in your blog how it bends in slightly in the middle ? Thank you !!!
@GirlArmy212 жыл бұрын
So, do you then put this cutout on a wall (non-permanent vinyl, I assume) and paint over it and then peel off the vinyl leaving behind the painted design - like a stencil?
@SilhouetteSchool2 жыл бұрын
Hey there! We don't have a specific tutorial for using vinyl for a stencil on walls. You can check out this tutorial for using vinyl as a wall decal here: www.silhouetteschoolblog.com/2021/10/what-vinyl-to-use-for-wall-decals-and.html
@touchofg3 жыл бұрын
Can you cut flock with Cameo 4 Pro cutter?
@MrShaunakin3 жыл бұрын
Thanks for the video! Did you post the link for the 13 inch sticker paper for print and cut!?
@stephaniesilva29623 жыл бұрын
What cut settings do I do for matte vinyl?
@SilhouetteSchool3 жыл бұрын
Vinyl, Matte (and increase the force to 14)
@1111sage3 жыл бұрын
Same quistion manual cutter
@LAKatKreations2 жыл бұрын
Thank you for your video! I was so excited to get mine, but unfortunately, I cannot get the software to SEND a job to the machine although everything is highlighted correctly. I was hoping to get some troubleshooting because I’ve tried everything recommended. I can’t get any response from the company via email or chat, so I guess I’ll have to return it with bad reviews. 😡
@SilhouetteSchool2 жыл бұрын
Hi there! You can always reach out to us via email and we can try to help troubleshoot. www.silhouetteschoolblog.com/p/blog-page_9.html
@TheMlbug4 жыл бұрын
What is the difference between the commercial cutter and the silhouette Cameo Pro
@millboroquiltersouthdakota60373 жыл бұрын
First time with this product ever. What do I down load software to? A computer? a laptop? HP . Android? iPad? iPhone? There is no book in the box! Told hubby it was probably a rip off product... No contact info in box either. Did he need to buy a computer for this?
@cesar618892 жыл бұрын
WHAT SETTING ARE YOU CUTTING ON? BLADE? FORCE? SPEED?
@SilhouetteSchool2 жыл бұрын
Hey there! Default vinyl settings with force increased to 14.
@carlamgalicia10292 жыл бұрын
What cut settings did you used? I'm having problems with my
@SilhouetteSchool2 жыл бұрын
Default for Vinyl,Glossy but increase the force to 14
@fairytaledreamstx4 жыл бұрын
But what about the print and cut, is it still only 8.5*11
@jaimecowan4903 жыл бұрын
No. But do you have a wide plot printer? The Pro goes all the way up to 24" but does your printer?
@fairytaledreamstx3 жыл бұрын
Yes I do,13x19
@jaimecowan4903 жыл бұрын
@@fairytaledreamstx awesome! You should be able to update the software for the Pro and extend the cut setting size.
@nicolecc792 жыл бұрын
My OCD is saying Don't waste that vinyl.... cut it do small parts.
@jaiej89984 жыл бұрын
the machine would be awesome if the cutting was not soooo loud. Other than that great machine
@SmittenKitten.4 жыл бұрын
You're so right. The noise is awful... I get nervous about leaving my cutting alone, in case something goes wrong, so having to stay there while it's working on a huge design would be a bit annoying. I still want one, though! Haha!
@jaiej89984 жыл бұрын
@@SmittenKitten. exactly...I have all the cricut machines....I can have two going at the same time and level the room
@SmittenKitten.4 жыл бұрын
@@jaiej8998 I wish I had several machines!! I have to cut, then reload, the cut, etc. What a huge time saver that must be!
@jaiej89984 жыл бұрын
@@SmittenKitten. yes I use the computer for one machine and my iPad for another machine. I just made the investment to get more than one machine. It does help a lot
@SmittenKitten.4 жыл бұрын
@@jaiej8998 If you ever start a channel, I'll be watching!
@papierschnecke13014 жыл бұрын
What about 24" vinyl in Germany?
@CrystalChristianStore3 жыл бұрын
Cricut maker 3 or this cameo?
@SilhouetteSchool3 жыл бұрын
This is a 24" Silhouette CAMEO 4 Pro.
@CrystalChristianStore3 жыл бұрын
@@SilhouetteSchool I make a question 🙋♀️ Cricut maker 3 or this cameo (cameo 4 pro)
@911HerbalinfoGoneRaw3 жыл бұрын
I've got a question, I got the cameo pro and the first time I used it, I was trying to cut vinyl but I put the vinyl on the mat and noticed the machine cut through both the mat and the vinyl even though I put vinyl in the software. I'm new to cameo so my question is, was I supposed to cut the vinyl without the mat? Also, am I supposed to change the settings in the blade? It's so different from Cricut. Thanks!
@SilhouetteSchool3 жыл бұрын
Sounds like the blade might not be in the carriage. correctly which mean it doesn't adjust to the correct blade depth when it's tapping and therefore. cuts too deep.
@patriciataylor19893 жыл бұрын
What is the name of the company that has the 24 inch FDC rolls bundle?
@baljazz4 жыл бұрын
How do you cut small words and images?
@Kalicensored3 жыл бұрын
Where did u get the pink heat press?
@mikeledee87862 күн бұрын
Why is it sometimes when I test cut it come out fine but when I do my project weeding is difficult, no cut all the way thru? TIA
@SilhouetteSchoolКүн бұрын
I cut adhesive vinyl on a force of 14, try that.
@mikeledee8786Күн бұрын
@@SilhouetteSchool Do I use the other default oracal 651 silhouette settings?
@heatherblaine87372 жыл бұрын
I am having an issue with the material going sideways while cutting and messing the up the whole cut. It happens bot from the mat and a roll. Is there a way to fix this issue?
@SilhouetteSchool2 жыл бұрын
Hi! It seems like you might benefit from 1:1 help. If so, please consider joining Silhouette U (www.silhouetteu.com). Members get access to 1:1 help via email, chat (just like this), and a private Facebook group. Our website also has 400+ video tutorials for all skill levels plus a monthly coupon code for free designs at So Fontsy. We hope to see you soon!
@organfan19682 жыл бұрын
I'm considering this 24" unit. What I've been seeing is a lot of wasted vinyl. Could I nest different designs and such to use the most vinyl with less waste?
@SilhouetteSchool2 жыл бұрын
Yes you can do that
@lashorty843 жыл бұрын
Is this good for htv vinyl? For t-shirts??
@SilhouetteSchool3 жыл бұрын
Yes it is :)
@beachlifesoy22534 жыл бұрын
I need to know why things are saving as "studio 3" when I have a cameo 4? tia :)
@Lulu.G-613 жыл бұрын
Studio is the design software that Silhouette uses and they upgrade periodically, like your phone. You can use the same version for the different machines. You have Studio Version 3. Hope that helps!
@LeisaGordon3 жыл бұрын
Where do you purchase the vinyl at for the cameo 4 pro
@SilhouetteSchool3 жыл бұрын
I got this 24" vinyl from Swing Design
@jayczedric20083 жыл бұрын
is it right regarding the cutting part? i saw that the image is in mirror and u cut the colored part of the vinyl, if u transfer that let say to shirts? do we need to use transfer tape?
@SilhouetteSchool3 жыл бұрын
Here are some good rules of thumb: HTV= has a carrier sheet, usually mirrored and cuts go on the back Adhesive Vinyl= Use with transfer tape, mirroring depends on application
@whimsyandme36792 жыл бұрын
Hi Melissa, I purchased a Silhouette Cameo 4 about 12 months ago. I haven't been able to use it as I cannot set the software up because it wants a US email address and I live in Australia. Do you know how I go about setting it up or if there is a way around it? Any help would be greatly appreciated.
@SilhouetteSchool2 жыл бұрын
I have not heard of this, people all over the world download and use the software. I would try again b/c that doesn't seem right.
@thelittleones47663 жыл бұрын
Hi, ive got this machine recently, i started with the little portrait and have since added a cameo 3 and 4 but this big one is causing me trouble haha. Cutting with a mat but its moving around halfway through cutting! Any advice?
@roccosorrentino27763 жыл бұрын
The only way to solve your issue is getting back to your Cameo 4. I'm quite disapponted by the customers' support
@barbthornton23969 ай бұрын
How do you turn on the automatic feed
@SilhouetteSchool9 ай бұрын
Prior to loading press the up arrow on the right side of the machine. It will start flashing, then hold both sides of the mat or material so the front is slightly touching the rollers and they will pull the material in
@avasgranb14 жыл бұрын
Do the two carriage blades work the same as in the cameo 4, or can you do a cut blade in the left and a pen in the right like the cameo 3?
@JuiceBoxx_6274 жыл бұрын
Oracle has gone after most of their resellers making it next to impossible to get their products and honestly they way they've treated their resellers I don't want to use Oracle anymore. Threatening legal action for literally no reason.
@JuiceBoxx_6273 жыл бұрын
@@myrecommendedisallmemes I've heard starcrafts permanent vinyl is good but I've still not used it
@SetitesTechAdventures3 жыл бұрын
I want to know if there is a way to get the damn vinyl to be really taut when cutting without a mat. For the most part my project that was fitting pieces into pieces went well but there was always a slight bulge in the middle when loading that I think might lead to slight inaccuracies. Do I just need to use the mat for precision cutting like that? Also to that, when the heck will I be able to buy a 24x24 Light Grip mat for this thing. The standard grip is too damn sticky. Also :) What did you mean about setting it up to use the back cutter. I have been feeding it through manually. It's be great if there was a way to feed it through automagically.
@QueenTiyeThomas Жыл бұрын
Cannot get the Bluetooth to work. On my phone
@graceminton19523 жыл бұрын
What should I do if I have put my vinyl in without a mat but it won't let me cut because the "mat is not detected"?
@SilhouetteSchool3 жыл бұрын
Check out this tutorial about cutting without a mat: www.silhouetteschoolblog.com/2021/06/how-to-cut-vinyl-on-silhouette-cameo-4.html
@charleswelch66323 жыл бұрын
How would this work with mylar for stain glass pattern making?
@supermadj3 жыл бұрын
I can't cut without a mat. I always got bad cut at the middle part. Middle Roller Pinchers don't hold down the media. They don't even touch it. Is there a way to fix it or adjust it?
@SilhouetteSchool3 жыл бұрын
We'd really need to see your material loaded in the machine to tell.
@supermadj3 жыл бұрын
I already report it through Silhouette America. But I got no response. I also attached photos regarding my problem. It is just a regular htv.
@beavers97043 жыл бұрын
Did you figure out a solution?
@impressiveprints53124 жыл бұрын
I hope they male it In black like my cameo 3
@kerryandeddiemckenzie43873 жыл бұрын
Can you use 12inch if the 24 inch is unavailable?
@valeriademacedobaylis98603 жыл бұрын
How much this machine
@ARXER-hi1zs3 жыл бұрын
For 550 bucks a stand should be included. Uscutters all have stands and are way lower in price. Cameo will make one for us to purchase. Not right for a 550 machine.
@karlarn20114 жыл бұрын
Can you use a a CB09 blade with it?
@TheScentsyWoman13 жыл бұрын
My Machine cuts but it won't use the correct pressure ,so it's not cutting all the way through (if that makes since )
@SilhouetteSchool3 жыл бұрын
For vinyl increase the force to 14.
@edithmercedesveiradelcast Жыл бұрын
con que programa de diseño funciona??? o con cualquiera?
@SilhouetteSchool Жыл бұрын
Hi there! Silhouette Studio is what you use with and of the Silhouette Cameos.
@tallkevin013 жыл бұрын
Wait.... HTV doesn’t go any larger than a 15” roll?