Silhouette CAMEO 4 Unboxing & First Cut!

[@whipsandchains1]

If only all tutorials were this straight forward, to the point and easy to follow along!

[@bryceblazegamingyt9741]

This is the best video on the cameo I have ever seen. Thank you for helping me kickstart my small decal business !

[@HeatPressNation]

Thank you!

[@kristiandrson1254]

I just got my cameo 4 and this video has given me hope, at one point I thought I wasted my time and money. Best starter video I have seen!

[@Codename-xj5qn]

Same 😅

[@rashedakeith3713]

Yes

[@CedrickWalker]

So did you get the starter bundle that comes with everything you mite need or did you buy everything separate I am actually debating on this one right now I just ordered my heat press 15 x 15 craft pro

[@rashedakeith3713]

@@CedrickWalker it came with some things but I can say this video help..I would say get one..you will need vinyl..I'm just ready to begin..

[@CedrickWalker]

Thanks ordered mine it’s on the way

[@anthonyesheku1183]

This is the best starter video I have ever come across. Am opening my New Cameo 4 tomorrow, can"t wait. Thx

[@HeatPressNation]

Thank you so much! Hope you enjoy your new Cameo :)

[@Tera-N-Tyler]

Same..I just got mine setup.. I can’t wake up early enough in the morning 😬

[@wilhelminakey5776]

Thank you so much you just don't know how lost I was until I found your video. You help to remove the fear of making a mistake. You have a new subscriber. Thanks for sharing and thumbs up!

[@rashedakeith3713]

THANKS THANKS..YOU HELPED MY ANXIETY,,I CAN BREATH..THIS WAS SO HELPFUL..

[@HeatPressNation]

So glad we could help =)

[@greatunz67]

Thanks for this tutorial, very clear and concise, i did my first cut while following along and it came out flawless :)

[@HeatPressNation]

Great to hear! Thanks for watching :)

[@Mariannscraftcorner]

I just received my silhouette today. I never ever had an electronic diecutting machine before. So I appreciate you showed me step by step how I should set up everything. Definitely I will stick around the channel for more great videos. THANK YOU!!!!!!

[@HeatPressNation]

You're welcome! Thanks for watching :)

[@nancycogar3864]

I just received my Cameo 4 yesterday and I’m finding I’d difficult to try to get started. I just wish that it would come with more detail get started book.

[@HeatPressNation]

We have more Cameo 4 videos in the pipeline. Hopefully we can have those completed and uploaded sooner rather than later. I also recommend joining either our Facebook group (heat.press/FBgroup) or the All Things Silhouette Facebook Group. There are lots of helpful peers on there who have great insight on using the Cameo and other Silhouette products.

[@712Clothing_]

@@HeatPressNation Hi I cut my design and the sticky side of the vinyl is facing up not down what did I do wrong?

[@MaisieStirfry]

Thank you so much for this! It looks as though everything is included in order to get going, but I wanted to make sure, is there anything else I need to purchase (I am completely new to cutting machines)? I see it comes with a mat, but what about a weeding tool? Thanks again!

[@panvibox9992]

Best cameo tutorial I've seen.... thank you so much. :) You got a new subscriber now... :)

[@HeatPressNation]

We love to hear those words! ;)

[@karenwilliams4064]

Best starter video! Thank you!

[@daijachanelle]

Karen Williams if you’ve figured it out please help me !!!!!

[@ArtyWildmaker]

Jared, excellent presentation. NO FEAR and the machine is so beautifully designed! Thank you!

[@HeatPressNation]

Thank you so much! :)

[@manudavis2164]

Very helpful! Thanks for the video.

[@ntombekhayaligege714]

Wow i feel it's gonna work this time, I bought my Baby (cameo4) in December and I'v been struggling to get started, the software is loaded everything is in place but It doesn't do the test cut after watching this I think I selected the wrong vinyl sheet in your video you say HT smooth, I'm gonna do just that when I get home, Thank you🙏 Your video is so straight forward I'm sure it's gonna work this time around

[@PaperPopUpsPetrina]

Needed in the video is a major part about how to get the Cameo4 software onto your computer. Yes, I did the download- but it did not put and icon on my desktop to find. I had to go into the Download files on the top of my open Internet file (the one where there is a little down arrow to show recently downloaded files) and once I opened that up it showed 5 files with strange names. I guess that these were from the SIlhouette dowload I did and guessed that I needed to open the .exe =file first before I opened exe1, exe2, exe3, exe4 and exe5. I am not savy enough to find this new file in my pc. My fix was to save one new file and create a new FOLDER and marked it cameo4 stuff. Now when I want to open the SIlhouette Program, I can go to the FILE I had to create as a template. Love your video though, Thank you very much. 🙂

[@elviagalvan78]

Woah!! Just getting used to my cameo 3 and I’ve had it for over a year! Can’t wait to see all the stuff you guys have in store with this cutter!! 🙌🏼

[@watchanime331]

Elvia Galvan you can

[@slidewayskenny6925]

Elvia Galvan cameo 3 is so much better than this junk. Look how cheap that screen looks compared to the touch screen the cameo 3 has

[@watchanime331]

I’m not sure why I commented you can. Must have been an accident lol. I actually have a cameo 4 and I hate it! You can’t connect a usb to it and it doesn’t have a “repeat job” option. Also the registration detection has been a pain. I’ve got it to recognize the registration marks maybe twice. It also had a weird glitch and spat my mat out super fast and into my face (I have it at eye level)

[@elviagalvan78]

SlidewaysKenny oh I have no intention of giving up my cameo 3.... Jared always gives awesome tutorials..... 🙌🏼

[@conniealexander7458]

Just receive my Cameo 4 for my birthday. Got it installed following the easy steps. Could you please tell me where do you get the free designs you show on your video. Thank you

[@kenishagrant599]

It's in the library sweetie. It will only come up once you've registered

[@suezeeq12]

Just got my Cameo 4 today - afraid to open the box but now I'm not! Thanks!

[@HeatPressNation]

Yay! So glad to hear! Hope you have a blast with your new Cameo 😃

[@deidalilujan2043]

I bought a cameo 4 yesterday sadly i had to return it wasnt functiining well it was refusing to cut even when i chnaged the settings the vinyl wouldnt stay steady it would crumbled it i watched so many yt videos but none worked for me unfortunately i wish i wouldve gotten the same results as everyone else u made it look so easy and flawless

[@HeatPressNation]

So sorry to hear that! If it was a faulty machine, I'm sure a replacement unit would work just fine. If you purchased from us, we offer free lifetime technical support. So you can call our team at they can assist you with getting your cutter to work 100%.

[@nursyuhada6672]

Hai, thanks for the video. I did setup my new cameo 4, but why my library are empty? There was non of free design.😭

[@HeatPressNation]

Every Silhouette Cameo comes with the following free digital content: 100 digital designs, 1 Month Subscription to the SIlhouette Design Store, $25 in additional digital downloads. You also have a special offer to receive your first month of Club Silhouette for free. The 100 free digital designs are automatically added to your account when you register your machine and connect it to your computer (you must be online to initially obtain your content). The $25 credit for digital downloads is included with your 1 Month Subscription to the Silhouette Design Store. This credit is good for any content offered through the Silhouette Design Store. This credit will remain valid for one month. Once you download content, it will automatically be added to your account's Library and is yours to keep, even if your subscription ends. For additional details on how to obtain your free content, please review Step 3 from the Setup Instructions for your machine: www.silhouetteamerica.com/setup/en/0/11/steps To get more info and take advantage of your free 30-day trial to Club Silhouette, please visit www.silhouetteamerica.com/club-silhouette

[@jennat5330]

I've read online reviews that many ppl are having problems with the 4. To your knowledge have the software issues been resolves?

[@HeatPressNation]

With any new product & new software, there are bound to be minor bugs that get fixed along the way. From iPhones to Teslas, that's just how it goes. Silhouette has been awesome with listening to customer feedback and releasing software updates as needed to correct these issues. You can even check out the release notes for every update to Silhouette Studio to see just how much they've improved their product in the short time since their launch: www.silhouetteamerica.com/software

[@vincentxiong16]

was debating between this or the 15" plus. But I'll probably will go with this. For making shirts, a width of 12" is already big enough for designs, so I'm basically saving myself $100 bucks.

[@HeatPressNation]

The main advantage of having a 15" cutter like the Cameo Plus is being able to use the full roll of HTV. You can still load a 15" roll of HTV into the Cameo4 . However, you'll lose about 3.4" on every piece, since the Cameo 4 only cuts up to 11.6" wide when loading rolls directly into the cutter. On a 5yd roll, that's over 600sq.in. of material that's wasted.

[@ig7061]

Does in works on 220 wolts? I want to by and I am interested if it works on 220 wolts.

[@shoshoamoora]

Why you put music 8:19 I want to hear if it is noisy when cutting

[@reem7324]

sometimes when I cut on 3 jet Opaque dosont cut in the point Exactly , stay there white edge beside🥲🥲🥲💔

[@HeatPressNation]

You may need to calibrate the print & cut alignment on your Silhouette Cameo machine. Please refer to this article from Silhouette for additional information: www.silhouetteamerica.com/faq/solution/calibrating-silhouette-cutting-machine

[@Godhumbledme]

Just bought a C-4 today having a blast (haha) seriously alot to learn alot to do :) thanks for the video.

[@gaming4K]

What if i cut matless but my vinyl is just right at the edge of the lock? do i put the lock in the next lock slot leaving 3 inches of vinyl free on the right from the lock or do i put the lock unlocked wherever i feel it would be best? 😬

[@HeatPressNation]

You want the wheel to be fully over the vinyl. If any portion of the wheel isn't making contact with the vinyl, move it over or use the cutting mat.

[@hubble6251]

Great video

[@merlenetravis2296]

Just got my Cameo 4 yesterday. Can’t use the USB cord with my MacBook, doesn’t fit. I was glad to see I could use Bluetooth, however the Firmware needs to be updated & can’t done without a USB chord plug in. VERY disappointing. Now I’m ordering an adapter from Best Buy. Hoping this works, but then won’t really need Bluetooth, if it even works ( others have had problems connecting). Also, your library of free 100 designs looks very different than mine. Are those some purchased ones too? I don’t have any of the ones you show in this video. Good video, just sad it didn’t come together that easy for me

[@HeatPressNation]

I feel your pain! My Macbook Pro only has USB-C ports, which basically works with android phones and nothing else. LOL. I had to get an adapter to use it with all my printers, cameo, etc. As for the 100 free designs, I believe Silhouette recently updated that library. The 100-pack you seen in this video have been around for a while now, so I'm glad they updated it. The newer ones are a lot nicer in my opinion. -Jared

[@ZydecoSoul]

Quick and to the point!! Thank you

[@tinawebb1502]

What if you have a library already set up from a previous model. How do you merge them.

[@HeatPressNation]

If you stored your designs on the cloud, they should automatically load in Silhouette Studio (must be logged into the same account). The software is the same and those old files will work perfectly when cut on the new machine.

[@xCARPx2014]

Is there a machine that can print & cut? Or a way to cut the silhouette of a print, like a sticker or something?

[@ralphie36361]

Mine is cutting thru the mat and vinyl... Adjusted it and still no help🥺

[@ericcox4448]

Just got my cameo. Thanks for the info.

[@oge102]

Can this trace and cut a towel material that can be used for embroidery and not for heat ransfer/Velvet materials? Also is it possible to create a fresh design with Cameo studio?

[@HeatPressNation]

We haven't tested this with towel material yet. There are some channels that have Silhouette-exclusive content and they might have a better answer for you on that. Yes, it's definitely possible to create original designs inside of Silhouette Studio, which comes free with your Cameo. We have several basic tutorials on how to use the design tools, point editing, etc. kzbin.info/aero/PLY9aNS49KtIxIyNxrMamGzgrk9uldI6hF

[@jelellyy]

When I do a test cut it cuts the edge of the mat outside of the vinyl. I tried copying you trying to mimic how you placed it on the mat and how you loaded the mat. I have a 4 plus.

[@MartineLR]

So I had the same issue and then found out you have to adjust the blade to the corner of your paper by using the glowing arrows. I'm no expert though just learning it all myself right now!

[@jeetuhirani7046]

Please tell which vinyl you have used in this video.. and can you tell me.. what should be the.. Blade Depth Force Speed For 3M vinyl..??

[@galepereyra]

Thank you so much for this video! I learned so much ☺️👍👍👍

[@HeatPressNation]

You're very welcome! Thanks for watching =)

[@PAINHOUSEJPG]

Can this print out a Desgin with different colors in it ?

[@HeatPressNation]

Yes. When pressing multi-color designs with HTV, each color layer requires its own separate cut and press. If you want, you can check out this episode of "HeatPressNation LIVE" where we press a couple projects with multiple layers of HTV: kzbin.info/www/bejne/gXW7oZWMeL98ask

[@cesarayala5107]

Great video the issue I'm running into is that II get an error when it comes to the registration part it keeps telling me it fails registration

[@HeatPressNation]

Here is a great resource from Silhouette on what to do if your registration is failing: www.silhouetteamerica.com/faq/solution/print-and-cut-registration-failure-or-cutting-off If you are still having difficulty, please feel free to reach out to our Technical Support department at support.heatpressnation.com or by calling [phone]. For faster service, please have your order number on-hand when calling.

[@cinthyacisneros4940]

Have a cricut thinking of getting this instead? It this better

[@JustEya]

Love love your tuturial guys and i bought most of my beginner's materials from you guys! Thnak you

[@monica6622]

so do we have to mirror the image before the cut?

[@shoshoar791]

3:38 it automatically change font like that? I uploaded a pic on studio but how to make the font like that?

[@HeatPressNation]

The font style is part of that graphic. So we didn't change anything. You can type up whatever you want using the text tool in Silhouette Studio. The program automatically loads all compatible fonts that you have saved on your computer. When you install a new font on your computer, it will automatically show up in Silhouette Studio the next time you open the program.

[@yasserabdulkadir7420]

Thank you for the video. Can I make stencils with this machine?

[@HeatPressNation]

Yes! You can use adhesive decal vinyl like Siser EasyPSV Removeable (heat.press/PSVrem) to create single-use stencils. The Cameo is also capable of cutting thin plastic stencil material, but you may need the Kraft Blade (heat.press/kraftblade)

[@gremlinsgaming6004]

What is the clear piece thats stuck to the vinyl? @7:24 what is that piece called anybody let me know ASAP

[@HeatPressNation]

That's the carrier sheet. HTV comes on a sticky, clear plastic carrier sheet. This helps keep the vinyl in place and all together while the cutter cuts out the shapes. After you peel off the vinyl that you don't want on your tee, the remaining vinyl is held on the carrier sheet. This is what's pressed on the garment. After pressing, peel off the plastic carrier sheet and the vinyl will stay permanently on the garment.

[@gremlinsgaming6004]

HeatPressNation thanks that was helpful , vinyl and heat transfer vinyl are two different things?

[@mahmudulrafi7704]

Can you please tell me which auto blade did they used? Autoblade (A) or Autoblade (B)

[@HeatPressNation]

In this video we're using a Silhouette Cameo 4, which uses the newer Autoblade Type B. The Autoblade Type A is the older version which is for the Cameo 3 and Portrait 2.

[@Happybidr]

Just got mine today!! I’m going to join him as he goes along.

[@thailandmunchies9142]

You should add the sound of the cutting too.

[@hvnlyangellee]

I purchased the deluxe but see the basic is what opens. I have no idea how to make this work and can't find help anywhere. Their customer service has not responded

[@HeatPressNation]

If you purchased the Designer or Business Edition software upgrade, there should have been a code that was provided to you. Open up Silhouette Studio, then go to "help", then click on "Upgrade Silhouette Studio". There you will be able to input all your information to upgrade your software.

[@AllovertheSpace]

This is one of the best video so far thank you

[@shelbyinsecondary]

my cameo 3 is messing up with the new software. it’s cutting too hard or not at all.

[@HeatPressNation]

Try reverting back to the previous version. You can download legacy editions of Silhouette Studio here: www.silhouetteamerica.com/software

[@maliq618]

So was that real time cutting?? Cuz the 3 is soooo slow it drives me nuts!

[@zrowedaartistviews2278]

You can change the speed but I wouldn’t suggest for more detailed designers

[@adrianabarrios5317]

does any design have to have a shape around it in order for the machine to cut? or why did you put the rectangle shape if you didn't use it on the t-shirt?

[@HeatPressNation]

That box around the design is called a weed box. It's not necessary for all cuts, but it does help save the unused portion of the sheet of vinyl.

[@marykerley53]

Thank you for this video help me make my first cutout.!!!!!!!

[@HeatPressNation]

You're welcome! Happy to help :)

[@unique4532]

Hey so the cutter and computer have to be connected ( cords ) together

[@HeatPressNation]

You can connect to your computer via USB cable or wireless Bluetooth connection.

[@unique4532]

@@HeatPressNation I did my first cut came out pretty cool I had words - some of the words peeled up .. what do you believe was the cause of this ( they were small too ) Would it have something to do with the blade debth?

[@630sunshine]

Do you have to match the blade number with what your blade cut setting is? Thanks

[@HeatPressNation]

The Cameo 3 and newer machines have an automatic blade. Set your blade depth in Silhouette Studio and the machine will automatically adjust the blade for you. Some older blades (ratchet blade) or other tools may require a manual adjustment.

[@630sunshine]

@@HeatPressNation thank you!

[@MoneyManMitch99]

what kind of paper did you use? me and my boy melted a plastic sheet to our heat press haha.

[@HeatPressNation]

Oh no! We recommend using quality heat transfer products, like those found on our site. In this video we used Siser EasyWeed Heat Transfer Vinyl. heat.press/easyweed

[@brendaolvera6823]

I follow every step but when I go to send it the button won't work and the test button either. What am I doing wrong

[@HeatPressNation]

If you purchased your Cameo from HeatPressNation.com, please feel free to call our technical support team at [phone] for assistance. They will be able to best assist you. If you purchased your Cameo from another retailer, we recommend contacting them or Silhouette directly for support.

[@stephaniem2049]

I thought the cameo 4 did not need a mat in order to cut? what is the benefit of using a mat vs not?

[@HeatPressNation]

It does not require a mat for materials with a carrier sheet (HTV, 651, etc). Those can be loaded straight into the Cameo. However, I personally find it easier to use a cutting mat with the Cameo. It's especially advantageous when cutting smaller sheets or scraps of HTV, and using the print & cut feature. If I'm not mistaken, a cutting mat is also required when cutting fabric, applique, and similar materials. -Jared

[@nobodynobody8912]

Stupid question, but this isn't just a vinyl cutter right? I can use paper? I have my own designs with multiple colors!

[@HeatPressNation]

Not a stupid question at all! The Cameo is designed as a craft cutter, capable of cutting TONS of materials - like cardstock, leather, thin balsa wood, and lots more. It also happens to cut vinyl beautifully, so it's rightfully become a top choice for folks who want an affordable and easy-to-use cutting machine to start making t-shirts with heat transfer vinyl (HTV).

[@nobodynobody8912]

@@HeatPressNation Thank you for your reply.

[@Messymyra]

I have a serious problem with the cameo stopping or crumbling the paper and I literally do not know what else to do

[@HeatPressNation]

Try these steps: - Use a cutting mat - Position the roller wheels properly on each side of the mat - Make sure your cut settings are correct. If the blade is exposed too far and/or if there is too much force, it could ruin your media.

[@agonmehmeti2735]

Should i pay monthly for its apps cuz im really considering buying one of these

[@HeatPressNation]

The Silhouette Cameo comes with a free month's subscription to the Silhouette Design Store. You can test it out the subscription to see if you like it. Besides that, I'm not sure what other monthly apps you'd pay for to use this machine?

[@sambulucci]

if it must to use that sheet which you stuck the vinyl on it? or I can simple use it without the board?

[@HeatPressNation]

You can load most vinyl directly into the cutter, though we prefer to use the cutting mat.

[@shycutepetalcurin3434]

Looking forward with this cameo4.. love it... 😊😊🥰

[@kedastumblerswaters9715]

Mine is cutting off Matt not cutting in right spot alignment off not talking about print and cut still trying to get my first cut I’m at circuit user

[@kristinejanemanong3349]

Can we use Cameo as well for creating notepad?

[@HeatPressNation]

You can cut graphics out of adhesive decal vinyl, like Siser EasyPSV or EasyPSV Patterns. You can see an example of how we customized a notebook in this video: kzbin.info/www/bejne/baa0cq2MnLijos0

[@anchor213]

Just bought the cameo pro and spent 4 hours trying to register the machine and I can’t. Do I have to use the big mat to register the machine for the very first time? Then after that can I cut without using the mat?

[@HeatPressNation]

You can load vinyl directly into the Cameo without a mat. However, you will need to use the cutting mat when contour cutting. If you purchased your Cameo 4 from HeatPressNation, please reach out to our MyExpert Support Team at support.heatpressnation.com or [phone]. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you.

[@aszad.4416]

This is great!! Thank you!!

[@drazizia2881]

I have a problem. If I want to cutting coral Draw 5x version. Mostly cutting size is decreased and change size . Exmp. 4x4 cm box to change 3.5cm . You have solutions?

[@HeatPressNation]

Sorry, we don't support CorelDraw. Maybe someone else reading this can be of help?

[@bleznfavrd5614]

I am not getting very sharp points when using the offset function when offsetting a star...I have tried both settings...please help

[@HeatPressNation]

Try making the main object larger. If you're offsetting a small object, you might not get the most detail.

[@kayostyle80]

hello do you have to pay monthly for the designer edition?

[@HeatPressNation]

No, the Designer Edition upgrade is a 1-time thing. So even when you upgrade the software version (i.e. from 4.2 to 4.3), it will remain the Designer Edition of that version.

[@user-jt5vm3mi1w]

Nice sales video

[@jenamezcua2608]

But how do you load the blade? I am super new so do I leave the backing on the vinyl? This leaves way too many questions unanswered

[@HeatPressNation]

2:21 👍

[@monica6622]

what do the cut setting actually mean?

[@biloparisien9903]

Hi can this machine does half cut ?

[@JessicaSmith-oh8dn]

This may be a stupid question, but did you choose those 100 free shapes in your library or did they come preselected? If you chose them, are you free to choose any shapes and fonts from the store? Thank you for your time

[@HeatPressNation]

Not stupid at all! The 100 free shapes are pre-selected and the same for everyone.

[@yvettel1192]

Hi, just got my Cameo 4 and couldn’t figure out where to find the free images that you just showed here :( I don’t see it in my library, where can I find it? TIA

[@HeatPressNation]

Check out Step 3 in the setup instructions for details on how to access that: www.silhouetteamerica.com/setup/en/0/12/steps

[@dwightdash1471]

hi i need help in cutting my thermflex plus vinyl using my cameo 4

[@HeatPressNation]

What's the problem? Is the cutter not cutting deep enough?

[@illusionall-stars7409]

I've downloaded the program and my Cameo 4 just doesn't look anything like what I'm seeing. For instance mine doesn't have the number guide on the top and side for sizing instead it has this little box. None of my files are downloading. I've been at his for 3 days now and just don't know what to do.

[@HeatPressNation]

Hit ctrl + R to toggle the rulers on and off. With the basic edition of Silhouette Studio, you can import JPEG & PNG files, but you will have to trace them in order to get a cuttable graphic. If you have vector files (.SVG, .PDF) that you want to import directly into Silhouette Studio, you'll need to upgrade to Silhouette Studio Designer Edition. I upgraded my personal home setup to Designer Edition because I create a lot of my graphics in programs like Inkscape and Illustrator. I also download vector files from sites like Shutterstock. It's definitely worth the investment. -Jared

[@95chrish]

Hi, do you know the max cutting force of tool 1? Is it the same as the cameo 3 (33)?

[@HeatPressNation]

Yes, tool 1 has the same force at the Cameo 3. Tool 2 has up to 5,000g (5kg) of force.

[@leahollsson129]

Whats it like cutting small designs? I want to start creating 4x6 inch sticker sheets. I am fed up with my Cricut to be honest. It always cuts out and it cannot cut circles to save its life! Im on my second machine now and im going to take it back.. Again. I saw a review for this saying its not very good at cutting small things neatly?

[@HeatPressNation]

How small are you trying to cut? Adhesive decal vinyl has its limitation on how fine the details can be. This is because the vinyl needs to have a certain amount of surface area to stick to in order to hold tight. We usually recommend keeping the smallest piece of your graphic at least 1/16" at the minimum.

[@HeatPressNation]

Also, a fresh blade and/or different cut settings might help you out.

[@troqueladorascolombianas2019]

Visit our video for people looking for large die cutting machines for large formats: kzbin.info/www/bejne/i2GodGd_oa53edE and our website www.troqueladorascolombianas.com

[@lauriehill4775]

I have just received mine and very disappointed. It seems no faster and it's 10 x as noisy.

[@amandabarry6760]

How do you change the blade extension

[@HeatPressNation]

The Auto Blade is set in the computer, in the output section on Silhouette Studio. Other blades are set manually, usually by twisting the base.

[@howardfuentes6991]

Hi Im from Philippines, if I order in your website for Cameo4 is the delivery to my country address possible?

[@HeatPressNation]

Hi there! Unfortunately, we currently only ship within the US and Canada. We apologize for the inconvenience,

[@MalcolmFlex3287]

I just recently bought my Silhouette cameo 4 brand new and I did everything right as far as the set up but I have not received the 100 Free designs that comes with the Silhouette and I tried multiple things and did several web searches and nothing works. I need some help!

[@ZydecoSoul]

I’m waiting for mine now. I’m actually nervous

[@MalcolmFlex3287]

@@ZydecoSoul yes it's a great device because it's so much you can do with it. I just feel shorted that I can't access the 100 free designs.

[@HeatPressNation]

Review Step 3 on the setup instructions to ensure you get your 100 free designs: www.silhouetteamerica.com/setup/en/0/11/steps

[@MalcolmFlex3287]

@@HeatPressNation I did everything that was required and I still don't have my free designs. It sucks that I paid all of this money and I can't get the standard basics.

[@eluelunglung]

Did the remove cut via the usb and the small display... 😑

[@jennyauthement4986]

I just got my cameo 4 in and am having trouble getting it go to a "ready" status. My computer recognizes it via bluetooth, but it says "Engaged" vs "Ready". I have tried uninstalling and re-installing and it is still the same. It also shows 2 devices, the second one with (2) behind it. I don't know what else to do. Any help would be much appreciated.

[@teachermarthamaym4139]

Does it cut acrylics too?

[@cyanoxicrose]

Can this cut and emboss at the same time? For example, if cutting gift boxes, will it just cut and I have to do the embossing, or will it do both?

[@HeatPressNation]

Yes, it can do both. But the jobs will run one after the other. So it will run the cut job first, then the emboss job after. But no need to switch out tools or anything like that. Just have the blade in one holder and the emboss tool in the other.

[@cyanoxicrose]

@@HeatPressNation NICE! Thank you very much for your response 😁!

[@adilucian2259]

@@HeatPressNation The emboss tool? Link please

[@wonderlandann8013]

Hi anyone know if this machine can kiss cut stickers? Or do a light scratch on plastic paper to make scratch patterns?

[@HeatPressNation]

It is very good at that! The blade exposure and downward force can both be adjusted to as light as you need.

[@minniekoko3661]

Im in South Africa where can i get the Cameo 4 and how much

[@HeatPressNation]

So sorry, but we don't have any pricing or availability information for your region. Please visit www.silhouetteamerica.com/international-distributors to find the dealer nearest you.

[@kysmoke7669]

My wife and I got a cameo 4, each from work today free, i really wanna try them out but i still need a heat press any recommended?

[@HeatPressNation]

That's awesome! The HPN CraftPro is a great starter heat press. It has a slide-out lower platen, which makes positioning your garments and transfers WAY easier, safer, and more efficient. That's my favorite feature by a long-shot, since I've burned myself on heat presses that don't have a slide-out lower platen. The CraftPro comes in either a 13"x9" or 15"x15" size: heat.press/CraftPro. There's also a swing-away model available, but I prefer the "clamshell" models. We have lots of other presses available too. Feel free to call our MyExpert reps at [phone] from Monday through Friday, 7:30am to 3:00pm Pacific Time if you'd like to get more info on other options. -Jared

[@reemaahmad5894]

Can I use my phone?cas I don't have a computer for the software

[@HeatPressNation]

We recommend getting a computer so you can take full advantage of the awesome (free) Silhouette Studio software. There is an app called Silhouette GO, which will allow you to send existing designs to your bluetooth-enabled Silhouette Cutter. As of right now, this app is for existing designs only and cannot be used to design/create new graphics. For an overview of the app, check out this video from Silhouette: kzbin.info/www/bejne/bIWWZaqkrK-hh68

[@kozuta8858]

Can I use this machine to cut logos and brand names like Intel or Logitech or something like that?

[@MissZazze]

Please help me ..Several days I'm looking for answer for my problem. I hope someone can help me. Why my silhoutte cameo 4 is cutting cutting mat ,but not vinyl? It's like it's not loading till vinyl and cutting the cutting mat. Tried to press arows to move cutting mat with vinyl, but it's not working. Like sometimes 2 of 10 times arrows will let me move cutting mat with vinyl.

[@HeatPressNation]

For an issue like this, we'd recommend getting in touch with Technical Support as soon as possible. If you purchased your Cameo from HeatPressNation.com, please feel free to call our MyExpert™ Support at [phone], Monday through Friday, 7:30am-3:30pm. We offer free lifetime tech support on all of our products. If you purchased your Cameo from another retailer, please reach out to Silhouette directly at www.silhouetteamerica.com/contact/

[@MissZazze]

@@HeatPressNation thank you very much!! 😊

[@chloethacker762]

when i hit the up arrow to load it just blinks! please help!

[@HeatPressNation]

If you purchased your Cameo from HeatPressnation.com, please feel free to reach out to our Technical Support Department at support.heatpressnation.com. If you purchased your Cameo from another retailer, we recommend contacting them directly or Silhouette's Support at www.silhouetteamerica.com/contact

[@emirkoc1544]

Does it come off when washed?

[@chinestaskelton2251]

I just got my Cameo Silhouette 4 ... I have been trying to download silhouette studio but in the process of downloading it gets stuck at half way point, don’t want to get about my T-shirt business please help!!!! It’s been 3 days of constantly trying to get started😞

[@chinestaskelton2251]

Discouraged

[@HeatPressNation]

If you purchased your Cameo from Heat Press Nation, you can call our Technical Support team for assistance with installing your software. [phone] If you purchased your Cameo from another retailer, you can request support from Silhouette directly at silhouetteamerica.com.