Silver & Gold Casting - Pressing Molds 8 Steps!

In this video i go through eight simple steps to press a sand cast mold using delft clay, to make jewelry. i show examples of jewellery iv made using this method made from sterling silver and brass. i then show myself making a cast out of wood for a custom pour.
Thanks for watching!
Affiliate links (buy tools used):
Delft clay (sand and mold) - amzn.to/3HCvmcg
Pouring Crucible - amzn.to/3WYsQSS
Torch head - amzn.to/3kPlQt2
Gas Torch kit - amzn.to/3IxJNPl
Dremel - amzn.to/3GFJcIY
Carving wax - amzn.to/3ZOvr3F

[@drtydsh]

I admire your passion, maybe I'll get to following these steps soon, rock on

[@anthonyclarke5579]

Wow that was a great video...I had no idea, thank you for keeping it simple.

[@Raicullimore]

Thankyou!

[@TrafficConeLover]

This is under rated ( I love this type of content )

[@Raicullimore]

Thanks very much!

[@nehweofficials]

Me too!

[@jacobhaust]

The quality of the casting turned out great wow

[@64t120r]

I really like the shell that you used in the video. The finished piece is very nice. I do some casting and I'll get into it more as time allows.

[@Zombiefruit]

Awesome stuff, great vid

[@neilkanagaratnam7445]

Excellent advice

[@Raicullimore]

Thanks !

[@xanselmox]

This video is what I was looking for. Subbed

[@Raicullimore]

Thankyou

[@scotts1356]

I just started pouring. I was always told the breather holes have to go from the object all the way to the sides of the mold. I noticed you punched holes in actual cast. Can you tell me why you did that and if that'll work for most sand castings? Thank you!

[@peacefulsoul4685]

Great how to video!!

[@Raicullimore]

Thank you very much!

[@hermaningvarsson3115]

Great video!

[@Raicullimore]

Thank you

[@apoloniabokszycka4820]

Really good content!

[@Raicullimore]

Thanks very much!

[@jaderene]

Awesome content!!!!🤯🤍💕💕🙏🏽

[@Raicullimore]

Thanks again Jade 😊

[@mollywoods8876]

Nice! 😊

[@Raicullimore]

😊

[@krisg4515]

I like the spiral shell pendant

[@Raicullimore]

Thankyou

[@krisg4515]

@@Raicullimore thank you, for responding

[@najialqarni6566]

Thank you for video, can I Use this way to cast ring with pronge?

[@scotts4134]

Great video, but I'm confused. Every other video I've seen, people put the vent holes on the "outside" of the piece being cast. You poked holes in the actual casting piece. Can you explain the difference please? Thank you!

[@meandmommy7341]

Oh u good xan u show big pics make and were u buy the stuff u using

[@editsoficial-ex1in]

Sera que da pra fazer um grillz desse jeito??

[@captainfelipe9270]

Great tutorial brother 👌🏼 do u work with all the metals? Do u take custom requests?

[@ParkashKamal-yx3qd]

Which powder you use

[@colinwescott5004]

Where you poked the " breathing holes " it looks like they will leak the metal out through them when poured ??

[@Raicullimore]

Yes it comes up the breathing a bit but doesn't dribble out as the metal cools down by that time. Thanks

[@katarina2438]

Great video! How many times can you use the wood frame before the hole is burnt too big?

[@Raicullimore]

Thanks you get alot of use out of it

[@robertb3842]

Thanks for the great video! Trying to understand what equipment you used, I clicked on the links… but most of them (sand, crucible, torch) are unavailable.

[@Raicullimore]

Thankyou! Oh really I will have a look and change that

[@sierraecho884]

You DIY mold box does not have any locators and instead of ramming the piece in there you should split in in two parts, plate one part on the bottom of the mold pack the sand ontop of it and ram the sand instead for a cleaner and easier casting.

[@hemigreen4589]

Ruben said that thus vid help so much thx my g

[@Raicullimore]

No worries!

[@jonathanweiss8931]

Could i make double sided 18karat gold token coins using this process?

[@Raicullimore]

Yes you could make somewhat basic double sided coins

[@thapainter11]

How to make copy of detail on top of ring?.I see plain rings ...

[@Raicullimore]

Hard to make much detail on the rings in the mold. Sometimes better to add detail after its been poured

[@MikailStoner]

Video was very informative. Had a question, is the casting sand reusable?

[@Raicullimore]

Yes can reused the sand. some of the burnt bits the were touching the metal I chuck out. The rest can reuse. Cheers

[@MikailStoner]

@@Raicullimore Awesome, cheers

[@jacquiventurini8844]

Can you re-use the sand after casting?

[@Raicullimore]

Yes most of it

[@DreidMusicalX]

I've not done this before and was wondering is the sand moist or dry?

[@Raicullimore]

Yes it's more on the moist side I'd say

[@scotts4134]

I'm new to sandcasting. Every time I fill the mold with the delft clay and pound it down, the clay will "split" open on the mold. Usually it splits in a different part of the mold, that I'm pounding. I hammering the clay in fairly hard. Is it possible I'm doing it too hard? I just can't understand what's causing this. When I turn the mold over, the bottom of the mold is nice and smooth. Can you please tell me what could be wrong? Thank you in advance.

[@Raicullimore]

Hi yes could be over hammering it, is it a home made mold or bought one? Could be the strength of the the mold or how it's fixed together.

[@scotts4134]

@@Raicullimore Thanks. It's one of those round metal cylinder molds.

[@bikashsubedi2222]

Where did you buy the clay please.

[@Raicullimore]

Amazon or site call Otto frei is two options thanks

[@adndetrasdeuncrimen7647]

🖐🏻 Thank for the info, what’s de white powder ?⚜️⚜️⚜️⚜️⚜️

[@kadyboon6895]

I believe he said baby powder.

[@Raicullimore]

Flower

[@AkifBisyafa-vb2sw]

What kind of clay?

[@Raicullimore]

Delft clay

[@jeffreykayes3857]

Guitarist? Noticed ya using fret files to poke your holes.

[@Raicullimore]

Nah mate it's actually nosel cleaner gas torches and that. 😊

[@athelostart]

Scottish?

[@jimcatanzaro7808]

Cast some brass knuckles

[@thepiggishshow]

Great video.. but you forgot the 9th step… Step 9: thanking Jesus for the sacrifice he made 😊 God bless ❤

[@Raicullimore]

🙏

[@mohangsk3759]

What is the metal ?

[@Raicullimore]

Silver