Silverado 2/4 Drop For A Cuhh

Just a simple 2/4 drop for a friends truck. Belltech drop kit with belltech sport shocks.
Get you merch by clicking the link below!
www.ebay.com/s...

[@Mr572u]

This is a 2/4 drop. With. 4/6 you don’t do anything with the shackles, but you do need a C- notch in the frame, shorter shocks, and a new tail pipe. I did mine without removing the rear end.

[@ls4.8frank]

I had no idea a 4/6 drop was so difficult and time consuming. I'm all DIY so might as well add it to my list of things to do to my rebuild. Lol

[@Papisartee]

It takes 1hr for a flip kit install having all the tools ready to go

[@MARTCAST916]

Gallo you should of used a BFH to get the ball joint to separate from the spindle. Works for me every time.

[@25vrd48]

Step by step process , very informative . Awesome video . Thanks for posting .

[@ls4.8frank]

Forced to go off of this install video because Rough Country seems to have very recently deleted theirs right after I bought my kit to lower my truck. Coincidence, I think not. Anyways, I am pretty mechanically inclined and you took far too many unnecessary steps but at least it gives me something to go by. Lol

[@suelo_abuelo8066]

He needs to fix that sagging front bumper too, but good job bro!👍🏽🔥💯

[@elgallobuilt6841]

He’s working on getting a complete new bumper. The one he has now is pretty banged up

[@Chubbza5]

@@elgallobuilt6841 Jack method works pretty well in the mean time with a 2x4... just sayin'!

[@juniiorrubio4341]

Donde compro la parte que puso atrás oh como se yama amigo

[@HeavyChevy]

Nice job, I like the way you lowered the diff on the cart with the tire. 👍🏻

[@elow305]

You can buy 2 inch shackles and get that same drop i have them on my truck and it looks the same

[@ericdata1]

hows the ride with the shackles?

[@krupttide8976]

@@ericdata1 if ur stock in the front and just throw 2inch shackles in the rear it honestly doesn’t ride different to me, just did it on mine 2 days ago

[@juanrivera7949]

get a tread rod from the hardware store, washers, nuts and from the bottom corner of the bumper to the top radiator support they have a hole go tru there, and I bet it never sag again

[@johnnysmith9041]

Awesome. I'd take lessons from you. Great narration very informative

[@TopwaterTony]

Nice n clean install 👍👍

[@casperfromlabelle6249]

I’ll take a sticker bro. I love your content. I’m about to notch my old dodge van.

[@anthonymaniz9896]

Good work mijo

[@texasmike7994]

Knock out ball joint rivets and bolt in new ball joints, sure is smarter n cheaper than buyin a new control arm

[@elgallobuilt6841]

I’ve preferred to go ahead and do the complete control arm because it’s a lot quicker. Just two bolts 😂 But I didn’t realize the parts store didn’t have any in stock and he had already ordered them so had to wait for them.

[@mikewick7324]

Yo. Take a jack and fix your boys front bumper. Good work though man

[@elgallobuilt6841]

Brooo I’ve fixed this guys bumper so many times it’s not even funny. Bad part is all of them weren’t his fault. At this point I told him to just get a complete steel bumper so all he gets is a little scuff 😂

[@AngelMartinez-om5oz]

I got the rough country lowering spindle it wont go all the way up on lower ball joint

[@ponchotx187]

Nice work N clean....can u help me with some info...what’s the lowest kit I can use on my 02 Silverado without having to use a c notch

[@elgallobuilt6841]

Lowest drop without a notch is a 2/4 drop. When you go up to a 5” or 6” drop you really should get a notch.

[@dleyba8074]

I have 02 silverado extended cab I bought rear 2in lowering shackles at autozone and rear lowering 2in hangers online with 2in lowering springs online for the front looks badass..

[@sosunaa]

@@dleyba8074 a lil late but i got a 03 extended cab g and i’m trynna see what yours looked like with all that. if u got a pic or vid of it lemme know plz

[@joshuaberkhimer898]

What kit did you use on his truck? I've got the same style and am interested in doing this. Any idea on part number from belltech?

[@Papisartee]

He should’ve just used the shaclkes to lift it up instead of the hangers

[@AM-su8op]

So much for finishing early

[@elgallobuilt6841]

Tell me about it 😂

[@poppasmurf1520]

That’s what I wanted to do but I put spacers on wheels. Now I’m not sure I can

[@jasonnellis3566]

hello i have a 2014 silverado 1500. i purchased 3 inch ndrop shackles they are too long is it good to cut the bed so they fit or just install new drop hangers and is it proper to reuse factory hangers if they are in goo shape ill just be turning them over or should i by new ones thnx so much

[@juanrivera7949]

u should fix the bumper is real easy fix and the truck would look way better

[@parasite_4203]

me being from ny seeing rockers a clean frame 😩

[@josephaltamirano4774]

Man on my 94 these things don’t wanna come out smh

[@breauxs1acrehomestead627]

What drop is on that burgundy truck in the beginning of the bideo

[@Blando7887]

If I lived in Texas Id pay you to do mine

[@elpaisa6562]

Hey gallo how can I lift my truck From the front like a inch because I have a 4/6 and the front wheels rub on the tubs

[@elgallobuilt6841]

What do you have on it now in the front to give it the 4” drop?

[@elpaisa6562]

Lower and upper control arms

[@elgallobuilt6841]

Not sure if there is a way to lift it one more inch if you have the drop control arms. You would have to put back the original control arms and swap them for a 1” drop spring and the 2” drop spindle. Only other option is getting smaller tires but that would also give you less ground clearance.

[@elpaisa6562]

Can I just replace the upper control to the original and leave the lower control arm? Will that lift it?

[@elgallobuilt6841]

you could but I’m not sure how much of a lift that would give you.

[@lowboostgarage8925]

You don’t got a link for the drop kit that you used? cuz I been looking for the rear hangers but I can’t find them on the bell tech website

[@tamps2147]

Hey bro so I got 2" drop shackles for my 04 single cab chevy. It still looks higher from the back tho. So I order the hangers 2"drop now. But my hangers say they go in FRONT of the rear leaf springs can they be put in the back like you did?

[@elgallobuilt6841]

No the hangers are different. The holes on the front hanger are staggered and the holes on the rear hanger are parallel. The front hangers are designed to drop the truck more but the rear hangers will lift the truck. The is because there is not much clearance in the back between the bed and the rear hanger so the rear hangers can only lift it

[@hondaservicecenter]

​@@elgallobuilt6841 no bro the 04-07 crew cab front leaf hanger is welded on, so you cant change them youre forced to do flip kit and then flip leaf rear hanger

[@jakestater2939]

When you removed the bump stocks the axle doesn’t hit the frame?

[@TMilera]

Do I need to use stock shackles with those rear hangers to get a 4” drop

[@elgallobuilt6841]

Yes you need to use stock shackles with the rear lift hangers. If you want to do a 4” drop in the rear you just need the 6” flip kit, a stock shackle and the rear lift hangers. Second option is doing front 2” drop hangers and 2” rear drop shackles.

[@TMilera]

Ok thanks for the advice

[@davidtrujillo4597]

@@elgallobuilt6841 Como estas enque siuda estas cupo travajo Como te puedo cominicar con tigo

[@luisrobles2808]

@@elgallobuilt6841 are the rear lift hangers used so it don’t hit the frame? Or what of the benefits of doing it that way?

[@manuelagreda5193]

so today i started from 8:30 am and finished about 10 at night but i put one hanger and shackle on and the hanger on the gas tank side doesn’t align with the holes where u grind and hit out with a punch and hammer could you help me out by telling me what i did wrong ?

[@carloscabellero4661]

Hey quick question 2010 Silverado are hangers removed for 2/4 drop

[@lazymochagirly]

So the rear front hangers u don't do anything, just the rear hangers n shackles change out. I just got a 99 sierra, I want this 2/4 drop too, what is best for the front, drop spindles or drop key? I have both. For the rear I just need the shackles n hangers for it.

[@hondaservicecenter]

You only do like this on crew cabs

[@oscarsamayoa6493]

How much is the beltech lowering kit ?? I go online but it keeps kicking me out...

[@9899miguel]

I have a 99 nbs gmc I wanna drop it more in the rear I have 2 inch shackles if I do flip kit would I need a notch? N could I use the oem u joints for the flip kit?

[@elgallobuilt6841]

Yes you will need a notch. An flip kit drops it 6” so with your drop shackles you’ll be at 8”. The kit will come with new u bolts to be more secure. I would recommend a step notch is your going as low as 8” in the back 👍🏽

[@jesusceniceros8071]

Does it ride rough?

[@elgallobuilt6841]

No sir the belltech shocks ride really good

[@jesusceniceros8071]

Appreciate man💯 keep up the good work

[@elgallobuilt6841]

Thanks brother I appreciate it 🙏🏽

[@michaelerato2364]

That bolt is not tall enough for the shim and the flip. I would be shocked if it did not fail fast .Any real HP would have slid that out fast .

[@efrainmartinez6600]

Is that shim a 2° or 3° ?

[@elgallobuilt6841]

2.5 degree

[@Papisartee]

Your u bolts are side ways

[@54inches]

What sized tires was he running?

[@tutyvlogs]

Acuanto sale el 2/4 para una Silverado 2005

[@bonez1365]

I have a 2008 Silverado. I want to drop it 2/4 what all do I need to make the drop legit. And what brand should I use

[@erykzavala438]

Hector Casarez have you found out?

[@MediocreMedic123]

Belltech for the rear and Moog for the front end

[@Doperey1998]

I’m trying to replicate a reverse level on my 2015, I installed 3” drop shackles but it still has a rake of 1 to 1 5/8ths will it be bad if I take out the rear blocks to get it level? Will it mess up anything in the long run like with the bump stops and stuff?

[@subelejamz2038]

No broo you be good I have a 2016 I remove the block and I have drop shackles it looks level

[@eddievazquez2330]

Where u guys located

[@alteradojo]

Chingon where you guys bought the kit ? Any part number thx man

[@mike2ice1]

What's the part number of the belltech used please?

[@marcelinoc20]

Were did you get the shims

[@elgallobuilt6841]

You can either find them on Belltech’s website or on eBay. Just search for pinion angle shim

[@projectv-max6686]

Does anyone know wjat degree shim to use with this drop?

[@pabloescobar4980]

Do you need new shocks for the rear ?

[@hugorivas1365]

ay brother i got dome questions how do i get a hold you

[@projectv-max6686]

Alright guys I needs yalls help, I have a 04 silverado thats has a 4/6 drop. Im wanting to go 2 inches up in the back and front. I see that the front has dropped coil springs with 2 inch spindles. The rear has the axle over the leaf springs (im assuming this is the 6 inch flip kit?) Whats the best way to achieve a 2/4 drop

[@commanderhasbulla3732]

put the stock coil springs back on for the front. for the rear, flip the axle back like stock, buy lowering hangers and 2 inch drop shackles, that will give you the 2/4 drop that you are looking for.

[@projectv-max6686]

@@commanderhasbulla3732 I've done the front now just need the rear, any sets of shocks you recommend?

[@commanderhasbulla3732]

@@projectv-max6686 would definitely go with the belltech street performance shocks. rides pretty good.

[@ThIzZi31]

What's up man, do you happen to have any of those front hangers you can sell me ?

[@franw51]

Its needs more cow bell

[@armandovega3450]

07 sierra classic bought 4 in drop for rear , my question is if the shims are separate from the kit or usually are the ones at the old knes from the truck.?

[@elcompajr457]

Are the wheels 20s?

[@onebad5thgenkhp28]

Were you located bro? Houston?

[@elgallobuilt6841]

Yes sir

[@_AlexFilmz]

Sheesh just lowering the rear of the truck looked like 2 years to do it

[@willowens8346]

all the 2/4 drops ive seen you dont need to drop the rear axle but idk lol i agree

[@Chucky-Chuck]

Where are you located at?

[@MONDIZY01]

Dam all that work for 2/4 🤦‍♂️

[@Jimmyxsx]

Yeah axle flip kits suck. Lowering shackles and hangers gets you the same drop and its way less work.

[@dleyba8074]

Yeah I did 2in hangers and 2in shackles rear lowering with 2in spring in the front way easier.. I have 02 silverado

[@jkrlozjherdez2924]

Gallo tengo mi 2001 silverado bajada, y necesito cambiar amortiguadores pero no se la medida... me puedes ayudar con eso? Gracias brother.

[@jz2518]

Tire size?

[@_rubenocampo_]

Would a 3/5 drop on a 04 Silverado Ext Cab be a leveled drop?

[@hondaservicecenter]

Yeah

[@chevyss18]

How much was the lower control arms

[@elgallobuilt6841]

Almost $400 for both

[@projectv-max6686]

Do you know what shocks you used for this?

[@efrainmartinez6600]

I have 20" shock on my truck

[@Jesus-hv2qi]

How much was labor?

[@elgallobuilt6841]

With the drop kit and and labor i did it for 500 but this was my old kit. Helped out a homie and initiated him into the cuhh world 😂

[@unknownvelasquezgaming7299]

Where are you located

[@elgallobuilt6841]

HTX

[@JoseRamirez-sw3et]

How can I contact you?

[@elgallobuilt6841]

Instagram @ElGallo_Built

[@jesse5108]

Do you have a part number for the kit

[@elgallobuilt6841]

Belltech rear kit # 6519 Belltech front spindles # 2508 Belltech sport shocks # 9541

[@joshuaberkhimer898]

@@elgallobuilt6841 just found this. rear kit says it's for crew cab only lol

[@elgallobuilt6841]

They all work the same. I never understood why it would matter because they all bolt on the same way.

[@jordoncolley1641]

@@elgallobuilt6841 Did they send you the shims with the kit? I have a 2012 GMC 1500 Denali AWD crewcab. I want to do a 2/4 drop on it but not sure about the shim size. I would go lower but I still pull my boat with it.

[@maistrote7539]

How much for the labor cuh? I want it for my c10

[@elgallobuilt6841]

Can’t promise anything boss I can’t even have time to work on my own truck

[@angeljuarez840]

Tacuache