Silverado 4/6 Mcgaughys drop. NBS drop. Chevy NBS. Slammed on 20s

Shout out to Ewa Beach Auto Repair and DJ’s Motorsports
And huge shout out to my wife who jumps in her car to pick up last minute parts from the auto parts store before they close.

[@jerrystevens7001]

Truck looks so sick! Nice job Bro

[@MiguelSanchez-rb3tw]

Yo bro, what would you recommend to drop my rear. I have a 99 Silverado on 26 Ltz reps. I want the wheel well to be at my tire or a little below. Right now I’m probably at 6” above tire. Would i need a notch kit or what do you think i should do

[@CheeHooGarage]

I recommend a 6” flip kit with a c notch. Depending what size tires you have, you’ll probably be tucking the whole thing

[@criskyro]

How’s the spindle and coil 4” drop combo riding up front? I see other kits have upper and lower control arm 4” drop. Would you recommend one over the other?

[@CheeHooGarage]

I would recommend control arm drop so you can run 15" wheels and stock replacement shocks. We did the ihc arms on my brothers truck in another video and I think his truck rides better.

[@criskyro]

You're the man!, I ordered the DJM kit which is a LCA 4" drop. Hoping its as good as the IHC kit.@@CheeHooGarage

[@CheeHooGarage]

@@criskyro lmk how it goes. The only reason we didn't buy that kit was because they wouldn't ship to Hawaii

[@criskyro]

@@CheeHooGarage will do 💯

[@yeah_Haha]

How mad was the alignment? I have 3" lowering springs and I have mad camber eating up my tires

[@CheeHooGarage]

The spindles help keep factory alignment specs. I drive it every day with no issues

[@yeah_Haha]

@@CheeHooGarage thanks bro appreciate it should I ditch the 3" springs and just get the 2" spindles? With just the springs I can barley fit my foot under the valance

[@CheeHooGarage]

@@yeah_Haha really? Not sure. Sounds like your truck is pretty low

[@yeah_Haha]

@@CheeHooGarage I'm guessing maybe because it has the lower valance of the z71 so maybe those just sit lower but I think I'm gonna ditch the 3" springs and go with the 2" spindles to get my alignment back cuz I have these tires for only 3 months and they showing wires already smh

[@albertquintero5412]

Alway good time to replace new front suspension for dropped truck

[@CheeHooGarage]

Yup! Thanks for watching

[@OzayCardenas]

how much would you charge to do the 4/6 drop on my 00 silverado. located in wahiawa lmk

[@CheeHooGarage]

Thanks for watching my vid bro 🤙 Unfortunately doing this on the ground without a lift sucked. My old ass body was hurting after 😂 I don’t know if I’d be comfortable doing a “customer” car.

[@robertmarsh5786]

Love the truck! Making good memories!

[@CheeHooGarage]

Thank you for watching. I love it too.

[@vicsalazarnbs]

So a cnotch is not needed if I just use a 6” flip kit by it’s self?

[@CheeHooGarage]

It is needed. It’s going to bottom out. Thanks for watching

[@twizzy4116]

Sick drop bro I got the same model and color silverado as you lol

[@CheeHooGarage]

Thanks for watching

[@martinhollins7727]

How is the ride comfort after your drop? Street vs. Highway

[@CheeHooGarage]

I would say it’s good. Thanks to those street performance shocks, however Hawaii roads suck. On smooth roads it rides cherry and on crappy roads, a little bumpy

[@urielchavez200]

Will a 4/6 drop rub if i have 265/50/20 tires? I got the same wheels as you

[@CheeHooGarage]

U should be good bro!

[@braydenhawks1462]

What size tire do you have on it now?

[@coreygaither2696]

Which kit did you get there seems to be two different 4/6 drop kits for mcghaueys

[@CheeHooGarage]

2” spindles 2” springs, flip kit with bolt in cnotch. Never really got it as a kit. I pieced it together

[@pureblood8427]

look good man

[@lukeduke1573]

Nice man…love the content

[@CheeHooGarage]

Thanks for watching. Appreciate the support 🤙

[@carlosbarraza8656]

Around how much did you spend total?

[@CheeHooGarage]

Almost 2500. Rims, drop, tires, hubs, control arms, tie rods, and alignment

[@omarbarron6242]

Which belltech shocks did you use?

[@omarbarron6242]

Part number?

[@CheeHooGarage]

www.ebay.com/itm/99-06-Silverado-Sierra-Street-Performance-Front-Rear-Shocks-for-4-6-Drop-2wd-/323241005317?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@omarbarron6242]

@@CheeHooGarage do you happen to know the part number? It doesn’t say on eBay

[@CheeHooGarage]

@@omarbarron6242 i don’t. I did this a while ago. Try messaging the seller

[@omarbarron6242]

@@CheeHooGarage ok thank you for the help

[@fknwayne_]

Sup bro I know in the video you said c notches "illegal" in Hawaii but what about now with the no recon? Can? Haha

[@CheeHooGarage]

As long as the inspector don't care haha

[@fknwayne_]

@@CheeHooGarage who you go to if you don't mind me asking? I like do one 4/6 too but that's the only thing I worried about is getting safety.

[@CheeHooGarage]

@@fknwayne_ Ewa Beach auto. Not to be confused with Ewa repair

[@fknwayne_]

@@CheeHooGarage rajah that my bradda. Ordering kit now haha 🤙🏽🤙🏽

[@GodblessAmerica617]

Damn, trokeando has reached hawaii?? Alv😁

[@CheeHooGarage]

Haha yessir! Thanks for watching!

[@ericgarcia7654]

What’s the link you got your kit or how did you order it

[@CheeHooGarage]

I bought it used off marketplace

[@ericgarcia7654]

So what parts did you use then to lower it really looks great 💯

[@CheeHooGarage]

@@ericgarcia7654 it’s all in the video. Spindles, springs, in the front. Flip kit in the rear. All mcgaughys. In a later vid I actually have a 3” spring on the passenger side and left the 2” spring on the drivers side to fix the chevy lean. Honestly if I was going to do it all over, I would go with ihc upper and lower control arms. Like my brothers truck, also in another video.

[@ericgarcia7654]

Thanks for the info your truck looks great

[@bryan_2k100]

Where did you get the springs and spindles bro

[@CheeHooGarage]

www.timssuspensiononline.com/ thanks for watching

[@yonyls]

What size tires

[@CheeHooGarage]

265/45R20

[@Easterhands]

damn what's that intro song? haha

[@CheeHooGarage]

It’s been so long, I forgot

[@Easterhands]

@@CheeHooGarage thanks for gettin back to me at least, if ya remember let me know

[@Dolliehomee]

Guest snap-on products r crap too!!! just like every other cheaper brands or no brands out there.

[@CheeHooGarage]

Nowadays there are so many different and cheaper brands, if it breaks, just get a new one. Thanks for watching

[@z11alemuz1]

Yoo what’s the link for the drop kit?

[@CheeHooGarage]

Right here bro. www.timssuspensiononline.com/product-p/93022.htm

[@ninorodriguez1547]

Awesomeness beautiful truck brothaaaa

[@CheeHooGarage]

Thank you 🙏

[@rickyhernandez8988]

What kit did you get

[@CheeHooGarage]

Mcgaughys 4/6

[@1_slow4.89]

What’s the music you used for this bro?

[@CheeHooGarage]

I don’t remember the name but it is from the KZbin library

[@thabossm-dubtx9407]

What tire size you running?

[@CheeHooGarage]

265/45R20

[@thabossm-dubtx9407]

Thanks