Simple DIY Plywood Bookshelf Makeover: Easy Techniques with Basic Tools and Vinyl Wrap

[@carmencarrasco4714]

Fits well into my space, I painted the back green. It's very easy to customize just the back if that's something you want to do. I would suggest sanding it first before painting, I got a little impatient. The shelves kzbin.infoUgkxM8H4CjCb79vzeyvgaFMdzmLm88oVFPMkare pretty small so keep that in mind if you're going to have it horizontal that some books won't fit. I like the snug look that it has. Good small shelf if you don't have much space, but not too small. Simple to put together, though you'll need your own tools, a screwdriver and a mallet/hammer, it's easiest to do with another person.

[@anniecampos8323]

That was amazing! Loved the diy table saw, and trick to get rid of the bubbles from contact paper. Will get going with my bookshelf. Hoping for success 🙌

[@rnrxtlc63]

Thanks for this post need a book shelf and I’m going to make my own. Great job!!!

[@celestialbeas9214]

You did great! that vinyl wrap took more patience than i would have given it. Nicely done!

[@ennemm9265]

Thanks for sharing these ideas and ways to go about it.

[@TheIdeaBox]

I am glad to like it 😁

[@rollinglama]

mast bhai. you did it with realistic tools for a DIY. Not those fancy tools that cost thousands. God bless you and hope to see more ideas from you.

[@TheIdeaBox]

Thanks you Moin Bhai 😁

[@jasminesingh1994]

Wow! Wish I could make it on my own

[@rajanikk4585]

Liked the video as soon as you said "Lucky Ali songs" ... 😄👌

[@AkashRoy-no3tf]

One more cool trick to stick these vinyl wraps.... Spray shampoo water all over the plywood and on the adhesive side of the sticker ... In this way you can easily adjust the wrinkles and the stickers wont get stretched either and after applying the vinyl wrap all over the surface just use blow dryer and leave it for 12-24 hours you wont get a single stretch marks and no wrinkles either

[@deepaknanda1113]

0:58 lucky ali😃

[@olystem6945]

Epic One Very Useful Video. Strongly Structured Video With Great Video Editing

[@anoobhamza]

So cool! This is a very underrated vlog. Awesome dude.😊

[@motorcyclistvignesh]

hi, this was an amazing build. could you share the overall cost and time breakup for the project w.r.t. to plywood, nails, veneer, labor.

[@balajichari9579]

Hi well done, 👍 .. please also show the hardwares you used like the size of nails and drill bits…. What is that tapered drill you used and any specific reason like strengthening? Also advise if I want to fix it on wall , I had a different thought with same size of ply, 2x1 on sides and 10” *8 to have it vertical with a foldable writing board at 2 1/2 ft from below 18”*2’ …

[@irfantalib9527]

You did so good .

[@prasadbiswas]

Excellent

[@suyelahmed5395]

Great work 👍

[@fashiera7891]

Good job 👍🏻 can i request DIY 5 in 1 cube chair?

[@shwetajacob19]

this is soo good

[@timdahl8912]

Good job!

[@HeyLier]

- Baatcheet👌🏻 - Lucky Ali❤️ - 09:50 ye chhotu sahi rakh liya😁

[@TheIdeaBox]

🤣🤣🤣

[@GurjinderSingh12390]

This is heck of a job. Well done brother. You have given me idea to use venyl instead of laminate. I made 3'*2' with 1 self in between but didn't apply back plyboard now I am struggling with the idea ro hang on the wall. Any suggestions?

[@TheIdeaBox]

Use 1/2 inch thick plyboard for backboard, and screw it on wall.

[@karthickb1973]

fantatic indian channel

[@kotteeswaranmassmageshwar7625]

Very fine sir

[@aafreen2129]

Sir ager yeh table hum banwaye toh kitne maine banegi

[@syedabulhussain4170]

An unbelievable

[@Kenri_Basar]

Will plywood withstand time and weight for a wardrobe for clothes, shoes, bag, etc? I want to build one myself

[@TheIdeaBox]

Yes, Plywood is a great material, if you put a good finish on it will last forever.

[@Kenri_Basar]

@@TheIdeaBox thank you for your reply.

[@nasirtakey7289]

Yes it will

[@activeias5593]

This is S.S.JANGID from Rajasthan ...i m also a carpenter i m doing same work as u doing.......c.

[@bstcanalysis]

Mere banana he batana kitna kharcha aayega....i am also from raj. Barmer

[@lovepeace29981]

Bhai kaha kho gaye aap?

[@KKumarIndy]

Can we order the final wrap you applied from any site in India?

[@Kenri_Basar]

Yes from Amazon. Vinyl self adhesive sheet.

[@jasminesingh1994]

How much time did you take to make it?

[@TheIdeaBox]

Two weekends

[@PintuSekh2.0]

Measurements sizes kitna hoga

[@wongsiewyung2679]

may i know what is the 3d app u are using for modeling?

[@TheIdeaBox]

Google Sketch up

[@charlesfranklin4097]

Bhai how much did it cost you the entire materials?

[@TheIdeaBox]

Around ₹3000. I used 1 sheet of 3/4 inch plywood (4 feet x 8 feet )and 1 sheet of 1/4 inch plywood, 3 rolls of vinyl wrap.

[@bstcanalysis]

And suthar kitne rupye lega ?? Banane ka?

[@aksingh2549]

Hello, There in one thing which is not clear in your design and may be you can help me to understand that. If you can label the dimensions in the bookshelf pic as you have mentioned in the board pic that will be a great. It will help the viewers to identify which part of the board go at which place in bookshelf. I hope you might be getting my point. Thanks. I may also try to make this kind of bookshelf at home if you can provide that information. Thanks .

[@MangilalJangid-d4c]

Focus only on tools, not even on surrounding noises

[@Nadeemkhan-dk2eu]

Meri Botany Ki Practical ki book Dokh Rahi Hai mujhe Wapis Dede Ab toh 😒😒😂

[@TheIdeaBox]

Aake leja😂

[@garzonlaperle9403]

This time I will do it manually with the help of Woodprix designs.

[@activeias5593]

Hii