Today we have to preform a Simple Exhaust Pipe Repair on my sister's 2004 Hyunda Santa Fe, but it is the same for just about any car.
Пікірлер: 43
@melissab23396 жыл бұрын
Wish you were my bro! That's really nice of you. My pipe rusted off like that. Still is. Monroe Muffler in MA (01089) wanted over a grand to fix it, giving me a song and dance about why they couldn't weld it b/c I'm just a "stupid woman." Anyway, you're an awesome bro.
@trollforge6 жыл бұрын
Thank you So Much!!!
@hm34266 жыл бұрын
Those muffler shops are freaking thieves. Have a problem with my 2003 windstar. The flex piece developed a leak. I'm looking to fix it myself. So, I'm searching for information on the pipes diameters. Looking to spend about $100.00 Never worked on mufflers before. So, I have been educating myself on it. By watching videos and reading about what size fits into what sizes.
@trollforge6 жыл бұрын
My buddies 2006 Windstar has 2" OD pipe.
@robertwillis1986 Жыл бұрын
Thank yolu very much! Just fixed my truck with the same problem. Thank you again for saving me hundreds of dollars!
@trollforge Жыл бұрын
Glad to be of service!
@davidcrowson47452 жыл бұрын
You're a good brother helping out your sis👍
@trollforge2 жыл бұрын
Thanks!
@liloneal154 ай бұрын
I literally have this right now and I seen where the problem is I just hope the mechanic doesn’t try to stuff the price because I can fix it myself now thanks to you I just want to go and see what he’s going to say
@trollforge4 ай бұрын
How to tell how honest your mechanic is...
@geobrown9413 Жыл бұрын
Much easier to cut three half shells to bridge that gap and use muffler cement and clamps. See " Instructables- Beagles- DIY exhaust repairs" for details.
@trollforge Жыл бұрын
While that would work for some people, In my experience it doesn't stand up to the use of people who buy 4x4s because they need 4x4s...
@RamonLFrancisco5 жыл бұрын
This is good but I would have applied muffler sealant on the pipes then clamp it. Let sealant dry for a day. I think you want to make sure no air escapes at the attachments so muffler sealant is added extra to lessen noise. Nice job.
@trollforge5 жыл бұрын
Thank you, but I have never been in a muffler shop that uses "muffler cement", it is just not really of any real use.
@BeTrueable6 жыл бұрын
very useful info. will try that some day
@trollforge6 жыл бұрын
Thank You!
@tomm80254 жыл бұрын
Should have been simple, but this video made it seem hard. How many have an anvil at home?
@trollforge4 жыл бұрын
Doesn't everyone? I have 3... ;)
@Mikesorrento33444 жыл бұрын
Nice job.
@trollforge4 жыл бұрын
Thank You!
@bthompson17673 жыл бұрын
Nice anvil
@trollforge3 жыл бұрын
Thanks, if I remember the story correctly, my buddy bought it when the Metcalfe Ontario (Canada) blacksmith shop closed in the 70s, then sold it to me because it was too big (300lbs) to bring to shows...
@khalifchambers41003 жыл бұрын
Aluminum tape 👍
@trollforge3 жыл бұрын
If you are in the USA you can get Stainless Steel Tape that sets up harder with heat...
@khalifchambers41003 жыл бұрын
@@trollforge hello yes I am in the USA I'll think about getting some of that tape thank you 👍
@RevtosTV7 жыл бұрын
That is a way better than the soup can fix that most people claim is the "best" fix!! It is a fix but not the "best fix"!!
@trollforge7 жыл бұрын
RevtosTV How odd, the fast forward stuff was supposed to have a music overlay...
@linneajohn76365 жыл бұрын
A brilliant garage. The mechanics are all really nice and always helpful. They always take the time to tell me what they are doing and never charge to much.
@linneajohn76365 жыл бұрын
you should've used nothing but the heat tape .. wouldn't the electrical tape just melt right away ? and somehow go all over the heat tape ? checkout manyautosltd.com A brilliant garage. The mechanics are all really nice and always helpful. They always take the time to tell me what they are doing and never charge to much.
@superdave72413 жыл бұрын
If I need it, can I come by and borrow your anvil???😬
@trollforge3 жыл бұрын
Tell you what, get some content up, so I know what kind of craftsman you are, and then we'll talk... ;)
@deebefree4 жыл бұрын
What material you using there bud?
@trollforge4 жыл бұрын
The pipe? Is a DIY exhaust repair part available in any after market automotive parts place in North America.
@deebefree4 жыл бұрын
@@trollforge thanks for your reply. I'm over in the UK but have found a similar repair kit online.
@banacek86755 жыл бұрын
Real simple :/
@trollforge4 жыл бұрын
Thanx.
@ferminhernandez94172 жыл бұрын
Como pido esa pieza de abrazaderas
@trollforge2 жыл бұрын
Espero que esto haya ayudado.
@thefester2156 жыл бұрын
how the hell was this "simple?" lol
@trollforge6 жыл бұрын
thefester215 certainly simpler than coming up with the $400 for the new unit...
@thefester2156 жыл бұрын
TrollForge lol I was referring to the banging you did and the tools used for that. It's an awesome fix!!
@trollforge6 жыл бұрын
thefester215 what? Isn't it the law there, that you have to own an angle grinder, before you can get a driver's licence? ;)