Simple Method of Coupling your loop to an SDR or other receiver.

[@chronobot2001]

I've got a tecsun loop antenna that is virtually the same as your grundig loop and it works great. People are always amazed to see how well it works.

[@ronlayton53]

Thanks for a very interesting video. I have wondered how to benefit my SDR by using my Select-A-Tenna and Super Select-A-Tenna as well as a few homebrew loops. This coupling technique works great!

[@soundguydon]

That was an excellent demonstration !!! Thank you for the video!

[@W1VLF]

Thank you Don, Appreciate the comment W1VLF

[@consciousness1237]

That was an amazing video, I just got a SDRPLAY RSP-DX and want it to be a powerhouse for all sw frequencies. You video was great and gave me new respect for those loop antennas I will be watching all your antenna videos. AA4CP Chuck Port Salerno FL USA

[@W1VLF]

Thank you Chuck, I appreciate you taking the time to comment. 73's W1VLF

[@karlschulte9231]

What size/ inductance do yo suggest? Resonate with 365 uuf or so? Tap for SW? 73 Karl

[@fotografm]

Great to see your experiments. I am getting into loop antennas too.

[@W1VLF]

Hi Simon.. Glad to hear.. Lets start experimenting

[@navstar7334]

Subscribed. Excellent video - demonstrations like this seem to help enormously in terms of cementing concepts. Old time physics lesson style! Cheers 👍

[@W1VLF]

Thank you sir I am so glad it helped!! W1VLF

[@paprotkowa]

Great video! You've re-sparked my faith in loop antennas! Kudos to you, Sir! ^^

[@W1VLF]

Glad to hear it!! W1VLF

[@toml.8210]

I wouldlike to see some photos or a video describing how the coupling loop was made.

[@RGC198]

Thanks for the interesting video. I have a homemade box type loop antenna and managed to connect my Yaesu FRG-100 using coaxial cable from the radio antenna output connection and connecting to another piece of coaxial cable via an F75 connection and draped around the loop antenna. I have also made it possible to use it with any loop antenna and even a long-wire antenna separately. You seem to go well with less noise down the lower end of the AM band. Here in Melbourne Australia, the unwanted noise is quite bad these days, especially on the lower frequencies. All the very best. Robert.

[@kensamson2094]

This is an incredible video. Thank you very much for your effort.... I'm working on some plans for a receive loop, and your series really is helpful.

[@JeanLoyens]

thank you for the video. just a friendly hint: next time, switch the two screens of size, so that people can see what you do and have the signal screen in small on the right (or half half of the size). surely those that see your videos on a small screen like a phone. kind regards

[@fredflintstone8048]

Thanks for sharing. It's a good idea. I restore and use radios but I also enjoy working with SDRs. I also use the SDR Console software that you're using. I enjoy using the portion of the software for tracking and receiving Satellite signals.

[@W1VLF]

Hello "Fred" Thanks for taking the time reply.. I am glad it helped you!! W1VLF

[@michaelnoardo3315]

can you tell me the value of the capacitor and how many turns you used for this Loop DIY?

[@patrickkerns2022]

Not sure what you moUnt the smaller loops to??? Just a plain coax female plug ? Looks like a box very confusing

[@mikeshane2048]

It's an SDR (Software Defined Radio) called HF Discovery+ . You can connect it to computer and listen to radio and do other interesting RF related sutff.

[@juliocesarpereira4325]

Another very useful video with a good dose of ingenuity and simplicity. Than you!

[@W1VLF]

WOW Julio Thank you very much. That is one of the nicest comments I have gotten. W1VLF

[@jonathanwesselman1575]

I myself confused what is the device he is adding to the loop antenna

[@peterk_hh]

Very interesting! What about using such a relative small loop for shortwave?

[@АлександрТом-щ6ю]

У Вас красиво работает анализатор спектра... И всё-таки на 12:21 картина отрывается целиком от "нулевой линии". Это связано с перегрузкой "автоматической регулировки усиления" или чем-то другим? Спасибо! [Москва]

[@garygranato9164]

please make a video explaining what different paramiters effect the loop antenna, can they be used for ghz range ?

[@xe1zlgg]

Absolutely brilliant idea..

[@fredfeldmeier8228]

Very nice video.. thanx 👍

[@Newlife-ol6pk]

What about VHF?

[@rocknemeth3418]

Does it make a difference if the sdr liops is single turb or multi turn (3 or 4 turns) ?

[@robertgrant7290]

Sorry. Did not know the right place to ask this. I am trying to receive a very low power 125 kHz signal. I was wondering if you could suggest an antenna loop size and number of turns I should consider making for this purpose. I am using a Ham it up plus and an rtl-sdr v3. I am using a loop antenna I purchased from Amazon . The signal appears very weak as it should. 8 db over the noise floor of -84 db. Curious what you would suggest. Thank you for any suggestions!!

[@acestudioscouk-Ace-G0ACE]

This is very interesting and reminds me of the "teaser" coil in crystal radios. Would you get a stronger signal if the secondary loop (with the BNC) had several turns? Thanks for taking the time to make this.

[@khemrajramsamooj9334]

Have you ever tried using an EMF source to transmit frequencies onto a coil? The function generator would inject the signals to the EMF source and the coil would receive the signals.

[@stevewinwood3674]

Is it possible to make a direct connection the the loop antenna? Possible as in would that work? Is inductive coupling better than making a direct connection to the loop antenna?

[@W1VLF]

Steve, It would not be better to connect directly to the antenna. Here's why, When you connect directly to the antenna you load down the loop with the receiver's input impedance, say 50 ohms. So the one turn is like the primary on a transformer. This will spoil the Hi Q of the antenna an cause signals to be low and you will not be able to tune the antenna. Secondly the one turn inductive feed isolates the coax ground from the antenna to achieve better balance and nulls. W1VLF

[@stevewinwood3674]

@W1VLF thank you for the response and very good explanation. Hopefully I am gonna be able to have the time to build one soon. Just have a RTL-SDR right now. Was thinking about the RDPplay but I gonna look at the airspy since you have had such good results from ut..

[@stevewinwood3674]

@W1VLF hey brother man, I tried making my own. It is 2ft square. 15 turns of 24 gauge solid wire from lan cable and 500pf air cap. Online am loop calculator said that should work. I have only tried on my old 6 band table top radio sitting inside it. I think it makes a tiny bit of difference but nothing I can see like I have seen on other videos.... It did have a small effect. It seemed like one time I was able to make radio go from one station to a different one turning the cap. I think I accidentally made a super sharp Q. H e double hockey sticks if I know. I must have messed up somehow. Haven't done the small loop to see if it works on SDR yet.

[@stevewinwood3674]

@W1VLF update same night: Ok I slowed down. 1. Hard mounted the air cap 2. Turned off the dang noisy lights. 3. Realized I happen to build this thing on a night that is a DXers wet dream. Can't touch know without coming across a signal. Listening to a station from Chicago and I am near gulf coast SETX.

[@JR-lx8nn]

Nicely done, OM. I like the simplicity of the test setup - allowing you to change small loops with ease and speed and let you step back and not become part of the test. I wonder what would happen if you taped a pickup loop around the main loop device so have a 1:1 pickup size? Thanks. 73 TT

[@stargazer7644]

So how is the pickup loop constructed? Is it just literally just a small loop across the coax?

[@W1VLF]

Yes.. Around the loop and across the coax cable

[@stevewinwood3674]

@W1VLF so one end connected to center pin and other end connected to outside( shield/ground) of connector?

[@johnpeterson7264]

Another great video ! Thanks for posting . I just received my SDR play duo and looking for the best antenna setup

[@scottbelcher9026]

Very cool!!! I love that homemade one!!!

[@theradiocommsgeek8631]

Paul could you couple a outside large loop antenna through a ferrite core to the smaller loop that would pass your larger loop signals to the indoor loop and then pick it up on the sdr so you could use the tuning knob for selectivity From the big loop. Probably a stupid question Chuck AA4CP

[@W1VLF]

Nope not stupid at all. I have done that in a very specific case. I used the main loop tuned to a station through a twisted pair of wire, to a small coil, on top of a AM radio as you suggest. This allowed me to turn the loop in any direction with out having to move the radio. Also it allows running of a remote loop outside lets say to a radio with no external antenna connection. Try it experiment W1VLF

[@roman_abelardo]

Excelente aporte 👍. Trataré en alguna oportunidad de fabricar una antena para mí olvidado SDR que nunca pude disfrutar... Gracias y saludos desde Argentina 🇦🇷👋

[@W1VLF]

Gracias por tus comentarios desde Argentina. Me alegra que te haya gustado el video, buena suerte con tu SDR

[@phyzzx22]

I wish I could see how you made the coupling loops. This should have been the main point.

[@jdcrunchman999]

Where can we buy the loops?

[@asherael]

Build em. It's just a coil of wire

[@glennstevenson6242]

I learnt a lot. Thanks.

[@kirknelson156]

what a difference that makes, very cool ;-)

[@oasishut3120]

I do watch this vedio multiple times. It's so informative. So bigger loop bring in more sensitivity and smaller Coupling more selectivity. Also what should one use for more sensitivity, a big loop or ferrite rod antenna.. does it make any difference if you make one end of ferrite higher than other end as I see it not perfectly horizontal in some radios

[@4nradio782]

Everett Sharp has said that a 64:1 impedance ratio transformer between the coupling coil and receiver improves the signal transfer. Have you ever added a transformer to your coupling loops? 73, Guy

[@W1VLF]

Hello Everett, I have not, but a that should be simple enough with a BN-73-2020 core. I will give it a try. Thank you W1VLF

[@4nradio782]

@@W1VLF I'm not Everett, but I learned this trick from him in a forum message he posted 🙂

[@W1VLF]

@@4nradio782 Sorry about that ... Things are pretty hectic here. Promise I won't do it again. 😊 W1VLF

[@AudiophileTubes]

Fantastic video!

[@raulgongora5288]

Very interesting friend. Blessings

[@W1VLF]

Thank you Raul... I appreciate the comment!! W1VLF

[@catalinalb1722]

Hi Paul, I do have the tecsun AN-200 loop antenna (your grundig) and with the audio cable I did connect it directly to my rsp1a. I think I will get bigger signals if I use a loop like you did. Can that be true?

[@W1VLF]

I suppose it possible, But the good thing is it only take a couple minutes to try it and find out. Build that 4" loop ZI showed and see what happens.

[@oasishut3120]

Great efforts...so for more selectivity use small coupling loop...

[@W1VLF]

Yes that is true but sometimes at the expense of signal strength. A decision you need to make based on your operating conditions.

[@teresathomley3703]

Thank you. Good video.👍

[@W1VLF]

Why thank you Teresa. I appreciate you taking the time to comment.

[@colderwar]

Someone who thinks like I do, and actually experiments instead of giving me a load of equations that I can't wrap my brain around. I knew this video was going to be good when I saw the high quality vice mounted on the bench :)))

[@jimratter5561]

Very interesting comparisons. Are these bigger loops homemade?

[@W1VLF]

Yes they are! All my loops are homemade... In the description there is a video about this particular one

[@Hungry_Hunter]

I have a Drake Radio hand book written in 1931 which describes this same loose coupled tank circuit as a signal multiplier so we are not inventing the wheel here folks. 90 years ago they worked all of this stuff out with log tables, slide rules and inquiring minds.

[@BrightBlueJim]

Well, if they were using slide rules, they probably didn't need the log tables.

[@franzliszt3195]

So the bigger the better?

[@franzliszt3195]

WOR. The old Jean Shepard station.

[@hubercats]

Very informative video. Thank you! One question I have is whether it would make sense to couple the receiver directly to the large loop? I’m guessing that the motivation for using the small coupling loops is to avoid needing an impedance matching network, but as you point out, the smaller loops do not take advantage of the larger signal strength available from the large loop. Am I thinking about this correctly? Thanks again.

[@mutstumbo]

Great informative video. Thank you for the upload and sharing. What happens if you stack/couple all of the loop antennas in a row? Is there a better reception all around, or do they cancel out?

[@aidenschwartz8968]

Very interesting and informative!!!. I was wondering how can we design a metal detector search coil so that it detects a quarter size coin from a distance of 3 meters? I appreciate it if you can show us a short video about that.

[@marcfareri2106]

Hello can not find thank you

[@tomweickmann6414]

I really can't see what you are doing here. Also could you explain a few terms for us noobs? Closeup shots would help.

[@frequencywatchers]

NOTE: When We Do Such Experiments And Stuff, Make Sure You Dont Wear Any Silver Or Gold Or Any Jewelry, Keep Your Phones And Everything metal Out of The Pockets Because That May Take A Effect On The Reception of The Frequencies You Are Experimenting On !

[@XPCTECH]

cool

[@ghostedyoutuber263]

orientate?

[@JustinRuth-km4wz]

Too much noise inducing the loop its needs more filtering needs to be notched ...its eay to noisy

[@雷鸣-r3o]

这么夸张，一堆天线差不多

[@joesinakandid528]

The major problem with HAMS is that they assume that everyone just knows what their acronyms are. To set you straight - well - NO, we don't. So, as to all the 'secret stuff' only HAMS have any interest or knowledge in - well, sorry. Thumbs down and no subscription. If you wanted that beneficience you should have planned better.