You are an absolute angel! 6 Years ago I purchased this same overlocker from a small store and I attended their introductory to overlocking class. I struggled to produce a good seam, messing about with tension, differential etc etc and was told I just needed more practice. So I then paid to do an overlocker basics class at another store. I spent the whole 8 hours struggling to produce anything satisfactory. I felt distinct machine-snobbery - mine was the only machine in class that didn't cost the same as a good used car - and I got no help at all really. So I came home and sadly parked my overlocker on the table my husband made for it, covered it with the dust cover I made for it, and it has sat there ever since.😔 I've been sewing knits & finishing seams on my sewing machine. This video came up in my feed today and I decided that I was going to try one more time to master this machine, or sell it to someone who could. Then you got to the part about the R for rolled hem and S for standard and I screamed! 😲Not one of the 'experts' I consulted ever even mentioned that red lever, not one. I've never moved it because I didn't ever progress to rolled hems, I couldn't manage a regular hem. Well.......my machine came out of the factory with the red lever set at R!!! I've set it to S and put through a scrap and produced a perfect seam!!!! You saved my overlocker and taught me to love it again. Thank you soooo much. If I didn't live on the other end of the planet I'd drive over and give you the biggest hug you've ever received 🥰💞💓💕
@kathrynjane2 жыл бұрын
AMAZING instructions - only comment is to remember to put the knife back up. I broke a couple needles before realizing that that is where I went wrong. 5 years after this video was originally published, it taught me how to thread my machine! Thank you :)
@mss70882 жыл бұрын
I’am a 67 year old biker and it looks like I’am learning new tricks. My great-grandmother was a hatter, my grandmother a seamstress, my oldest sister made her own clothes. I always could always use a sewing machine to make seat covers (love a follow-foot machine) or repair my jeans. My sister passed last year and left me 5 sewing machines, one is a MyLock234. It looked pretty cool with 2 needles and 4 bobbins. I cleaned it up oiled it made sure everything was moving properly, but I never saw it run or knew what it actually did, my wife has been curious as well. I looked it up on KZbin and found you, nice job; I feel like a pro, however the thing probable does a lot more than the basic stitch. I’ll be watching to see what you put up, thanks’. Mark
@josettelovercheck31655 ай бұрын
7 years later and still an amazing tutorial!
@cst4444 Жыл бұрын
This video is such a gift! It seems I need to use it EVERY TIME my lower looper thread breaks or I need to change thread. Thank you for having such clear instruction and visual!!!
@fionaestherfortuin41856 ай бұрын
Sitting with this problem cotton snapping
@kateransom6756 Жыл бұрын
Great video. It’s the first time I have had to thread my serger and I could not have done it without this video. ❤
@Observer35489 ай бұрын
Your explanation is the best! I wish I had found you years earlier, I will certainly share this KZbin with others who are struggling with threading their sergers. Thank you very much for the very precise tutorial.👏👏👍🙏🏻❤️
@margaretlougheed13902 күн бұрын
Cathy you are a born teacher, so glad I found your explanation. Brilliant
@kellireynolds38623 жыл бұрын
You are officially my personal Lord and Saviour. After 2 hours of tears and frustration this afternoon I thought - I'll Google and see if there is a tutorial. I could NOT have asked for a more thorough and calming tutorial and my overlocker is now working! I cannot thank you enough. You've really made my entire year. xx
@janicequirk15786 ай бұрын
I love your explanation of threading the lower looper. I always thought the lower looper was to be done first. Your tip of forming an x withe the loopers.
@janicezablocki12943 жыл бұрын
This video was perfect. She did a great job of demonstrating, explaining and showing how to thread a serger. I tried some other videos but this is the best one. The manual is impossible to follow so keep this gal. We need her.
@lorrainesmyth55282 жыл бұрын
What a brilliant tutorial. Easy to follow clear instructions. My 10 year old grandson , followed the instructions and was able to thread my new machine , producing a beautiful stitch. Thank you so much for a very helpful tutorial 😁
@janetwalsh85156 жыл бұрын
I watched 3 different videos on threading this serger this morning. You are the only one who said the lower looper thread needed to be on the top of the upper looper. This made all the difference in the world. I was actually able sew out a sample without the machine jamming! Thank you so much! The best tutorial ever!
@learningHRin2024 Жыл бұрын
Thank you! I gave away a Brother760 serger because i couldn’t thread it and got a Janome 990d. Your description is detailed and you are a trie genius when it comes to explaining hard stuff. Thank you
@mhowland55442 жыл бұрын
This is the BEST video on how to thread the Janome 8002 D. I watched a couple of others and I could not follow the visual. This video helped me so much. Thank you.
@peggyayala32145 жыл бұрын
I purchased a brand new unopened in the box Janome 134D who was someone else's White Elephant. When I opened it the instruction video was on VHS (ha ha) Out of all the videos I watched this video was bar far the best ever. I changed out all of the thread with new spools and was up and running in no time. Thank you so much for your time and very informative video. I am saving this video for future reference.
@LauLeeL6 жыл бұрын
Thanks to you, my "white elephant" can now become a "work horse." You are a wonderful teacher! Thank you, thank you
@jaceschulz42989 ай бұрын
This was so helpful in getting me to finally set up my serger. Grateful to find a video tutorial that doesn’t prefer the tie threads and pull through method of threading.
@firstevac2 жыл бұрын
Thank you so much. Having own my overlocker for ten years, first time I do the threading property. 💕
@MelBundy Жыл бұрын
My go to threading guide. I have it saved and every time I forget, I go back to watch it again. Thanks so much 😊
@kerryjames19234 ай бұрын
thank goodness for this video, you just saved my sanity
@colleenjolicoeur60598 ай бұрын
Thank you for this clear and confidence boosting tutorial. My old Janome 204D got a thorough servicing and it is out on my table serging of all things. 20 years later I am finally giving it the love it deserves. Helps if someone teaches you how to thread it.
@marym49832 жыл бұрын
Absolutely brilliant!!! You made everything seem so straightforward. My machine is never going into the cupboard...
@solangeherault70387 ай бұрын
Thanks to you I managed to use my serger after 6/7 years that I own my serger. I am so greatful you have know idea. Thank you so much ❤
@marlajones33882 жыл бұрын
Best tutorial ever! Was so frustrated trying to thread my serger I almost bough a different very expensive machine. I owe you a nice dinner next time I'm in town!
@marielawlor4357 жыл бұрын
Thank you so much for giving such a clear tutorial; not just threading but showing a beginner around the machine. Finally have the confidence to get my overlocker out after 5 months!!
@alloya3695 жыл бұрын
I truly don’t have enough words to THANK YOU! Bought my JANOME overlock T-99D, freaked out when I realised how difficult to thread, exactly as u described, been the white elephant in the closet, with so much disappointing and frustrating feelings because I’ve been watching tens and tens of videos on KZbin, but never succeeded until I found you, THE MOST PROFESSIONAL AND HONEST, absolutely informative and positive spirit! You should be a life couch:) THANK YOU SO MUCH
@NgocHuynh-rs5fo5 жыл бұрын
أم فيصل Viêm xoang sau
@vivianarubino83454 жыл бұрын
You right I own one serger for years and I never used because I was scared about the treading I ended selling out...but now I buy on other one and I already start to use it thanks to KZbin video helping a lot !!! Thanks to you too
@lizzieb631111 ай бұрын
Wow! What a great tutorial. The floss threader is GENIUS! I have an older 634D My Lock and aside from the tension disks everything inside the serger is the same. I’ve been able to thread my serger, but the threader is a game changer for me on the lower looper. As you say, many of us fear our sergers…I bought my Janome about a year ago - used - fifty bucks - from my Viking Pfaff Dealer where I bought my sewing machine. About 3 months ago I dragged it out and tried to thread it…I did and I’ve been using that wonderful serger ever since! It is WONDERFUL! Best fifty bucks I ever spent and am stunned I got such a bargain especially since it was serviced and came with the manual and MOST parts (but not all)..but they are not a Janome Dealer so it had been sitting unnoticed for a while and they marked it down from 150.00. Frankly, I enjoy it more than my Pfaff sewing machine 🫢 I wish I could do everything on my serger. Thank you so much for your well put together tutorials…much appreciated!
@DancingDi6 ай бұрын
Unfortunately that product doesn't seem to be in Australian. 😥
@dogeatdog8474 жыл бұрын
Thank you so much. I bought mine new 16yrs ago, all threaded up ready to go. Looked too complicated to use so it sat unused for 16yrs in a cupboard and forgotten about. I recently re discovered it and thought ok lets see if i can get help online to help me use it. I found you and i am so grateful for your video and clear explanations. Now i understand how it works and how great it is to use! Mine is a My Lock 204D and thought i would have difficulty finding help, since its quite old, but was pleasantly surprised to come across your tutorial Thank you again. Kia Ora from NewZealand!
@jancraigs6311 Жыл бұрын
Brilliant so much better than the info book, boxed mine after threads broke & couldn’t thread. 23 years later saw this video, great shows how to thread the dreaded lower loop, learned there was another green loop & ordered the floss threaders great, l now can use my overlocker thanks to this video..... great many thanks Jan x
@lauralab438 ай бұрын
thank you I was ready to give up. I was missing the 3rd hidden loop. I just ordered the floss from Amazon. This is the best instructions on youtube. Cant thank you enough.❤❤❤❤
@samanthawright238 ай бұрын
thank you so much! i just got this exact serger but in pink and i think it's the 100th anniversary edition. I was so intimidated reading the little booklet it came with so i'm so happy you made this tutorial. i just did a practice stitch and it looks so great! i bought this machine to make my pieces look more professional. thank you so much!
@bonnie184 жыл бұрын
Great video! I watched it several times until I had an "ah ha" moment! That lower looper is tricky but the shot of the upper and lower loopers crossing was golden. Thank you, thank you. And shout out to Jonathan for noting where the threading begins, much appreciated.
@sharonmullins44447 жыл бұрын
now that I found you I'm not going to through my serger out the window. Was having trouble with the threaders now on the market braking. My older serger that I had for 30 years had a threader with a hook on the end that worked wonderful. The new wire ones brake right a way and no one on line had anything better. Thanks so much for your help!!!
@mizhoneydrop4 жыл бұрын
Thank you sooooo much 💃🏽💃🏽💃🏽💃🏽 I’m literally want to jump out of my skin out of excitement for the success of my threading. Thank you, thank you, thank you. Oh God bless you.
@FatmaAhmed-pj8hh2 жыл бұрын
You very good Teacher, many thanks to you because I understand the beautiful way of explaining how to use this machine, I put it 15 years ago, until now I funded not easy to use it. God bless you 🥰🕊🌹👍🏼💐fatma from London
@knittingfoxmontana97304 жыл бұрын
I am so thankful to you for making this video. You are kind and patient. I was so afraid to use my serger just in case a thread broke I would never be able to thread it again.
@FunkyHorror14 жыл бұрын
I LOVE YOU!!! Thankyou so so much for this video. I was gifted a second hand overlocker and just could not get it to work properly. I've watched so many tutorials, shed a few frustrated tears, dropped many curse words and was just about ready to give the thing away, then I stumbled upon this video and hallelujah!!! The overlocker, she lives!!!! Turns out I just had to thread the upper looper first! Thankyou again for such an amazingly informative video. You're a legend!
@PoconoSewAndVac4 жыл бұрын
Thank you for the kind words!!!
@kimmoyer6132 жыл бұрын
I just found this video and can't thank you enough for the very thorough explanation of every step. I don't find the manual to my 8933 MOD serger to be very helpful. I learn much better with a visual. I wish it wasn't a three hour drive to your shop. It looks beautiful! Thank you again!!
@RitaDeSousaofficial7 жыл бұрын
Hello! mine is a My Lock 204D I couldn't find tutorials anywhere, I'm so glad I came across this video! I cannot thank you enough! Greetings from the United Kingdom 😀
@PoconoSewAndVac7 жыл бұрын
We're happy it helped!
@taulagoioane38656 жыл бұрын
Same! I've this model too
@patriciahobson63202 ай бұрын
After watching the video again i followed the instructions and now i have a fabulous machine i can now use. Thank you so much it is the best i have seen . X
@sthardy12 жыл бұрын
I had forgotten how to thread my several years old Janome MyLock204D serger and your video is amazingly thorough. You explained the Why as well as the How-To. Thank you, thank you!
@maryfernando75456 жыл бұрын
Sheba 15 July 2018 I have had my overlocker for 3 years and have had to get help to get it threaded. Finally it became the white elephant like you said. Tonight at 11 decided I felt the great need to look for help online. I watched a couple but was not too happy until I got to your Tutorial. Eureka !!! you tutorial is just so clear with emphasis at the right spots so I could not possibly miss them. Thank you a million times. Queensland Australia and it is nearly midnight.
@juliakempf83382 жыл бұрын
Thank you very much! You are a good teacher. I learned a lot from your clear, easy to follow instructions. 🙂
@bf6908 Жыл бұрын
Lady, you are a saint! I just bought a Janome Anniversary 792PG serger and was completely lost when it came to threading it. Your video was a godsend! I've never used a serger before, and am not very good at sewing, but I am determined to learn. Thank you so much for your video. I had to watch it about three times to get it, but I just tested my serger and it works! I will subscribe.
@cst44445 жыл бұрын
THANK YOU, Thank you! My 2 year old paperweight finally has life thanks to your excellent tutorial. I so appreciate the time you took to create this. Very clear instruction and camera work helped tremendously to finally take this out to rethread and put her to use! I had no idea when I purchased how difficult the threading was. Your video took all the mystery away.
@smoochme1 Жыл бұрын
Oh my God, I have been trying for weeks to get this thing threaded right at work and needles then frustrated and I decided to watch a different tutorial and then ended on yours and it actually is working correctly! Thank you so so much because I was about to give up on this whole surgery thing
@rdrobins Жыл бұрын
Thank you so much for this. I just threaded my serger for the first time ever thanks to you! I was looking at the manual and watched an old instructional video by Janome, but I could not see what I was doing wrong. After finding your video I discovered that I missed the little needle after the guides for the upper looper, and I also didn't catch that the lower looper thread needed to go over the upper looper thread. Thank you thank you so much!
@memaperm95535 жыл бұрын
The instruction booklet that came with my Baby Lock serger doesn't have clear threading illustrations. The serger has been gathering dust in the closet for over 7 years because I couldn't figure out how to thread the lower looper. I followed your instructions step by step and I'm delighted to have the serger up and going again. Thank you for your excellent tutorial.
@friedaprinsloo99033 жыл бұрын
€
@hungvu84803 жыл бұрын
Thanks to this clip, i have no clue how to rethreadvthis green one. Almost bring the machine back to the shop but they close due to covid. Get in utube searching and i find you. It is the most valuable instruction video. Thanks again
@rhodaking71733 жыл бұрын
Yes my serger was the elephant in the closet. I followed a different video 7 years ago and it was difficult to follow. So when my thread broke 6 months ago, I didn't want to put myself thru that horror again. Today was my sewing machine maintenance day. So I took a deep breath hoping to watch a more less difficult instructional. Yours was perfect. I even replace the spools with brand new ones. Thank you. I didn't have a threader so I used a long twist tie to pull the thread thru. Thank you so much for your patience.
@joanmeekds4 жыл бұрын
Thank you very much first time using my serger it came string and I was happy about it but the thread burst that when the trouble started I just could not get this machine string I watch severals videos and none of them help i was getting frustrated I just could not get this machine string it was the lower looper thread was giving me the a hard time but you come to my rescue you did this training so well step by step and now I got it on the first try I can't thank you no more you have make my day thank you so much may god bless you and keep on doing what you are doing to help ppl like me you are amazing teacher and a patient one you just don't know how I am 😂 happy
@gaillouviere84713 жыл бұрын
This is the BEST video or demonstration of threading a serger I have ever seen. I've got a new Janome 8002d serger just sitting because I have been so unsuccessful in threading that lower looper. Thank you!
@scout3610004 жыл бұрын
Great video ....my mom uses the serger and had forgotten how to thread it after 3 years of not using it. She is 93 and loves her serger!!!!! Thanks for the informative video
@prinncesswade98006 жыл бұрын
I just tried this today and I have a Janome 3434D that I *thought was broken* and needed to be serviced so I bought a new Brother 1634D. It wasn't until my thread snapped on the Brother that it occurred to me that should try and thread my Janome also. I watched this video and now The Janome works even better than the new Brother!! Thank you so much for this video! Its a little lenghty but VERY WORTH THE WATCH!!!!!!!!!!!!!!!!!!!!
@staceyhansen1650 Жыл бұрын
This is the most useful video on youtube of all time. Thank you
@CraftyCuriosity6 жыл бұрын
my serger was in the closet for 15 years until I learned how to thread it with this video
@jackelinelopez16995 жыл бұрын
Si este video fuera en español...gracias x la explicación...por lo q vi..me ayudo a entender mi máquina...
@ljtilmon4 жыл бұрын
😆
@willyjones39712 жыл бұрын
Yes please
@huanitaberkova83785 жыл бұрын
Exactly - a few days ago I have just bought it on-line and I we've been freaked out since then. Thank you from all my heart. Greetings from Slovenia.
@Sulli2Homes7 жыл бұрын
I want to thank you!! I have a 334D which has been in the closet for over 22 years. Thanks to you I was able to thread my machine & it works beautifully!
@PoconoSewAndVac7 жыл бұрын
That's what we like to hear! Don't forget to give your machine a good oiling. After 22 years, it will need it!
@catladylion51863 жыл бұрын
Your video is so helpful. My upper looper thread keeps breaking (same serger as yours) and I just couldn’t figure out why, I thought I thread correctly , and it drove me mad. And guess what , it turns out I missed that pin where the upper looper thread needs to go behind . And now I just tested it on a piece of fabric, it works . Thank you for making this video and save my sanity and hours and hours sitting in front of the machine being frustrated. Many loves from Australia
@kellyfisher57616 жыл бұрын
You literally saved me today. Was close to never touching my machine again. Very well explained. You’re my hero!
@jacquelinerice56873 жыл бұрын
This is the best tutorial….I can finally thread my sever that has been sitting unused for a year…thank you so very much
@catdcambs4 жыл бұрын
I have never used a serger before.My husband bought this for my birthday ( I am doing sewing classes) . I have only used a sewing machine . I am I love with this machine, because of your tutorial it’s really made it easy to use. I have not even looked at the DVD it come with!.
@janicejaap35334 жыл бұрын
I think you do a remarkable job with your video's and explainations. I have you #1 on my lesson list!
@jacquelinecowles96375 жыл бұрын
I have had my Jenome Juno for a couple years and this is the best video about how to thread it I have found!!! Thanks!
@campbellfamily20647 жыл бұрын
I've had this machine for two years and have been struggling with using it. Thank you so much I now have the perfect stitch on my fabric. Great tip about the lower and upper looper threading with the criss cross. Thank you thank you.
@krwoods1257 жыл бұрын
THANK YOU!! This is the best tutorial yet for my Janome serger.
@jeremyschneider3603 жыл бұрын
Kept this in my favorites for over a year now. Come back to it everytime I rethread. Thanks so much Kathy!
@melissasteiner90394 жыл бұрын
Thank you for the excellent video. I recently purchased the same serger but it hasn't arrived yet. I am so excited to use my serger. This was the best video on KZbin on how to thread this machine. Thanks again.
@elizabethbrown18314 жыл бұрын
Spent the whole of yesterday, threading my serger without success. Tried again this morning, again with no success. I have watched this video - thank you so very much! I now see where I went wrong and am confident I can do better.
@monicaparfitt381211 ай бұрын
Excellent explanation. Thank you. I used your video every single time and I learn more and more every time.
@JonathanPerez-ri1dt5 жыл бұрын
Actually starts threading at 20:00 min in for those of you that wanted to know
@deelamb74625 жыл бұрын
A lot of extra chatter.
@MarizabelGonzalez4 жыл бұрын
20 minutes saved!
@mattsabin44984 жыл бұрын
Best comment EVER
@cresties23424 жыл бұрын
I had a feeling this was going to be the case. Thanks for the heads up.
@lorawiese58974 жыл бұрын
Oh my this is fantastic. My husband bought me one but I was so worried about the threading. TY sooooo much.
@sherriejohnson92506 жыл бұрын
I can't even express my gratefulness to you for this video. I've had my Janome 8002D for 4 years now. Tried to use it more often, but always get frustrated. Especially when a thread breaks and I have to thread it...or when I want to change the color of the thread. Now I know why! I've watched a few other videos over the years but your video (and I came across it just by a KZbin suggestion for me to watch!) explains every single detail. I kept checking my machine as I was watching it. Didn't know about the rolled hem feature because I couldn't understand the instructions in the manual. I love the tip about using the floss threader thingys to thread the lower looper. You are just a super pro when it comes to teaching all the little details. I had an older serger for over 15 years and rarely used it. Thought this newer fancier one would be easier but it wasn't. Thank you...thank you!! Now...two things... (1) Wish there was a way those of us who don't live near Pennsylvania (I live in the UP of Michigan) and couldn't purchase from you could watch all your videos. I personally would be willing to pay a fee if your store charged it, to watch these videos or take video classes)! and (2)...just bought a new Janome Skyline S9 three weeks ago. It is so beautiful. I'm wondering if you have any videos available for this machine? Bless you for doing this. I am actually feeling that I can thread this serger now and not have heart palpitations!
@PoconoSewAndVac6 жыл бұрын
Thank you so much for your kind words--much appreciated! We are so happy the video helped. We also have two other videos, Simple Serging 102 and 103 which discuss more serger techniques in detail. Congratulations on your S9. It is a fabulous machine. One of the best features of the S9 is the wifi capability. Please see our video on using the Janome Acusetter app for perfect placement of embroidery designs. Although the instruction is given on the Janome 15000, the information is applicable to the S9. Lauren and Kathy walk you through how to use this essential app. It's a game changer.
@sherriejohnson92506 жыл бұрын
I have now watched 102 and 103. And several of the Janome 15000 videos, including the one you've suggested. I figured after watching a couple re: the 15000 that the machines are quite similar in features. Thanks so much. Look forward to learning all I can so I can put this knowledge to use with my new machine...and of course my serger :-)
@boydfam565 жыл бұрын
The directions were so detailed. It was wonderful instructions. I've never owned a serger and had no idea how it even works. This was a wonderful video.
@katiegibson24467 жыл бұрын
First time EVER I've managed to thread it - brilliant clear instructions - thank you
@sarahodonnell69575 жыл бұрын
Every eventuality you have described is me. Dusty thread overlocker in a cupboard for 19 years etc., I am determined to use it now. Thank You so much for your impeccably clear instructions I am truly grateful. Many blessings from England xxx
@melanien.18835 жыл бұрын
Thank you Pocono Sew & Vac.... I had been planning on selling my serger that I have only used a few times. Too intimidated about the threading. Now I am taking charge... thank you again.
@quiltycatlady1087 жыл бұрын
I was gifted a magnolia 7034D. This tutorial is the best! My friend had given up on using it, but with your help I am on my way! Thanks so much!
@tikiyizi7279 Жыл бұрын
Thank you very much for a detailed and an amazing tutorial on a machine which is intimidating and has been a challenge to me. But you gave a very good explanation and precise tutorial which I will never forget and fear anymore because I have saved up your video. Thank you once again.
@sarahsenk44982 жыл бұрын
YOU ARE AMAZING AND SO PATIENT ❤ Just because of your guidance I didn't quit! Can't thank you enough! 🙏❣❣
@wordplayerk3 жыл бұрын
My Janome serger is 14 years old and for the first time I ran out of thread on one of the loopers and had to retread the machine. I was really struggling! The tip around 37 minutes was what I needed (the lower looper thread has to go over the upper looper thread). Thank you for such a thorough video.
@trishmichael75284 жыл бұрын
Thank you so much for this brilliant tutorial. It was a battle of wills between myself and my Janome overlocker which I can now say I won with your help.
@diansafitri16 жыл бұрын
Thank you so much for making this video. My husband bought me a Janome 990D for our 10th anniversary and I had no idea how to use it. This video is very helpful and you were very thorough.
@johall82317 жыл бұрын
I am so very happy I found your tutorial. I have had my serger for about 10 years and because I could not get it threaded after the thread broke, I have not used it. I worked over one hour with manual in hand and did not succeed (today). Finally went to the internet....thank goodness. You made it so much easier to do and I DID IT!!!! Thank you!!!!
@PoconoSewAndVac7 жыл бұрын
That's awesome! Serge on :) .
@bathtubmethlab2 жыл бұрын
this video has saved me so many times i am so grateful. absolutely wonderful teacher
@danielle1958003 жыл бұрын
I was having problems with my overlocker, followed your clear instructions and everything is honky dory! Thanks a million 🙏🏼
@thingamajacky7 жыл бұрын
thank you so very much! that lower looper threading process has pained my brain for the past 2 hours. so glad I came across this video... so well-explained. 👍👍👍
@vickiereinwald49643 жыл бұрын
I have had my serger for 3 years and never learned how to thread it! This is an amazing tutorial and helped me out tremendously. Thank you!
@Nour_81453 жыл бұрын
You have the best tutorial ever! It helped me thread my serger SUCCESSFULLY👍👍👍👍👍 Thank u so much!
@anniekochera3 жыл бұрын
Thank you for this. I'm giving my Janome serger to my daughter and we got it all tangled up following the threading on the front cover where 1 is the Lower Looper. I had to look here and on elsewhere to remember that the Upper Looper is always done first. Once again, thank you. God Bless
@esinfa3 жыл бұрын
This is the guide that I always go back to💖
@trishgeekie82147 жыл бұрын
This was amazing...thank you so much!! I bought my machine in the UK last summer and have tried, on and off, to get it threaded correctly but without success. Your video was just fantastic. 😍😍😃😃
@RRb2348Z4 жыл бұрын
I had my Janome 3434D brand new in a box for 2 years. I got it out yesterday and everything was perfect until I broke the lower looper thread. The instruction booklet was so hard to follow, i was REALLY stuck on the last guide. Your video was awesome and so explicit, very easy to follow. Thank you!!
@willson725 жыл бұрын
I have this exact machine. I sat staring at it today, trying to remember how to thread it. It's been in storage for 5 years!! Thanks for the very helpful and well explained information!
@user-rl9pm7fj6x Жыл бұрын
Absolutely fabulous teaching video on a serger! This did give me the confidence that I needed, and can thread the serger like a champ now! Thank you!
@skwungebobsparepantsx51232 жыл бұрын
thanks for this tutorial my overlocker has been sat for a while because i didnt know that they had to be threaded in a certain order. my thread kept breaking, i tried a couple of things that didnt work so i put it away...... iv just followed your instructions and its working perfect. I am so happy xxx
@carolynblake4681 Жыл бұрын
Thankingyou so much, you are very relaxed explanating everything, make me feel more confident by the end of the post. This is the first time I've used my overlocker, since my hubby purchased on line💜👍
@ritarossini94687 жыл бұрын
Thank you so much for this tutorial!!!! My Mom gave me this machine, all set up and ready to go. Then my 6 yo cut all of the threads. I was intimidated to do this threading but your video was absolutely the best!!! THANKS!!!!
@PoconoSewAndVac7 жыл бұрын
Glad it helped! Happy Serging!!
@dianebauers42313 жыл бұрын
My Serger has been in my closet for 7 years because I just couldn’t get it threaded correctly. Your video is precise, clear and great to watch - complete with snapping sounds which I didn’t know to listen for. I can’t thank you enough for this video. I love your teaching technique and I hope I can find more videos from you. Thank you, again for this very valuable video!