Simple trick to remove stickers from frame

[@rihssty]

Definitely a trick coz I can't guess what liquid was used.😂😂😂

[@onelastlap9302]

Isopropyl alcohol 👍

[@rihssty]

@@onelastlap9302 Thank you👍

[@ivanta6283]

Im sure there are other options. Gasoline Alcohol Hydrogen Proxide WD-40 And if you cant afford any of them somehow, the soak the sticker for an hour or 2 then it should soften😂

[@onelastlap9302]

Good alternative suggestions 😊

[@_MonkeyPee]

Thanks broooo 😀

[@superslimanoniem4712]

H2o2 probably will just bleach your paint. Gasoline is way too explosive and volatile to use safely.

[@Friddle]

Tbh if you can’t afford alcohol or gasoline. Removing the label off your bike is the least of your concerns

[@mtbnomadsouthsideant7909]

Alcohol works just fine 🤷🏾‍♂️🤦🏾‍♂️

[@MillionaireNick]

I love the part where you explained what you're using.

[@onelastlap9302]

Isopropyl alcohol 👍

[@ramusdangus9424]

Only 9.99???

[@onelastlap9302]

I think it was just part of the sticker 😅

[@nj2033]

Use cooking oil/any oil to remove stickers from anything. It instantly removes the stickyness so it can't restick

[@onelastlap9302]

Great tip, thanks for adding!

[@mlegrand]

Something like Goo Gone?

[@onelastlap9302]

Should also work! This is denatured alcohol, most solvents should do the trick

[@shawnjakan7431]

Wd 40 works too. Yep lots of options. But thanks

[@PJCC_BAISH]

All u have to do is heat up the surface and scrap it gently.. That simple.

[@protoni6996]

ain't you going to tell what's in that bottle? well alcohol and oil work at least 😅

[@onelastlap9302]

It’s isopropyl alcohol 👌

[@electricbikerider]

WD 40 is the thing for sticker glue removal

[@onelastlap9302]

Thanks for sharing!

[@DARSHANPHATAK]

Concentrated Sulphuric Acid

[@onelastlap9302]

Probably a bit too strong for this!

[@rebeldanger9116]

9.99 for a bike vs my bike 599.99😢😢😢

[@grumpy-dad3701]

Hand sanitizer gel works wonders on labels

[@onelastlap9302]

Good to know!

[@grumpy-dad3701]

@@onelastlap9302 it works wonders on grease too.

[@Sweepea413]

Word I’m a try that

[@jordanbiird]

Don’t waste your time with all the dumb liquids and products that promise to take things off. Use a blow dryer or heat gun (carefully). I use it to take stickers off almost anything, all the glue and sticker intact.

[@onelastlap9302]

Heat can also work well, this is isopropyl to soften the glue

[@kalenhouse]

Simple trick, but you never said what the chemical was that took off the sticker.

[@onelastlap9302]

Isopropyl alcohol

[@ryanfranco9978]

Mighty Bond lang pala magandang pang tangagal ng mga sticker sa frame.

[@lxstcxntury5844]

just use any kitchen oil😂

[@fruitpunch267]

Bros bike was $9.99

[@onelastlap9302]

This bike was probably around $1000

[@fruitpunch267]

@@onelastlap9302it was a joke the sticker had warn away and only shows 9.99 that’s why I said it

[@vjekoslav20]

Just use antisilicone

[@jerm215]

Wd40 , hand sanitizer , goo gone and a plastic razor blade all work

[@onelastlap9302]

Nice summary, thanks for adding 😊🙏

[@aristotelischaniotakis7283]

Clean streak blue bottle

[@onelastlap9302]

Thanks for tip 👍

[@Randy-ry9ss]

I hear battery acid works well too.

[@onelastlap9302]

Haven’t tried, but seems more toxic/dangerous than needed

[@Randy-ry9ss]

@@onelastlap9302 it was a joke.....please don't use it.

[@cbailey2376]

Yes, that should get rid of your bike as well. 😂😂

[@elonmust8133]

Why was his bike frame only 10 dollars tho

[@onelastlap9302]

Only part of the sticker 😅

[@R3MMEY]

This is so satisfying

[@onelastlap9302]

😊

[@ML-pe9hb]

Aceton , But be carefull 😮

[@onelastlap9302]

Good idea to wear gloves

[@liliyuan9531]

First apply heat. Then peel off.

[@nicolasdmr187demureac]

What it s this?

[@onelastlap9302]

Using isopropyl to remove sticker from bike frame

[@the_trooper_72]

A hair dryer works just as good 😎👌🏻

[@onelastlap9302]

👍😊

[@divyanshugunshola3931]

can i remove form hair oil😂

[@Faiq_Hussai_n]

Thanksss

[@abdullahabdulrasheed2575]

Hot air gun works best, i guess, like most auto industry detailers body work etc people use hot air gun to get the glue under sticker melted again to peel if without a dot of sticker left, or use boiling water and lot of it, probably a steam iron to steam the sticker enough to peel off easily. Probably should work

[@abdullahabdulrasheed2575]

Someone mentioned cooking oil works too, but cooking oil soak well atleast 2 to 3 times, then no issue to pull of sticker probably

[@onelastlap9302]

I’ve found hot air works well too, sometimes a combo of solvent and hot air is even better 👌

[@SanyaClaus]

p.s.: на некоторых рамах наклейка отойдет вместе с краской самой рамы

[@onelastlap9302]

Can be a risk in some cases!

[@GDGaming626]

Wo glo tha kiay

[@jetoytv2045]

used Lighter Fluid

[@tariqjutt3742]

bhi ye is k uper kya lga rhe ho

[@Miles_Link]

뭔가 속이 다 개운해지는 영상이군 😮😅

[@onelastlap9302]

😊🙏

[@bartsshorts]

will semen work?

[@darnutzer]

Hello together, use WD 40; a much better solution

[@onelastlap9302]

Thanks for the tip!

[@ianosborne2468]

Cool Man😢😢😮😢😅😅😊🎉🎉🎉🎉😂😂😂❤❤❤❤❤

[@onelastlap9302]

👍😊

[@grader32]

Enough perfume

[@cbailey2376]

...and your bike will smell fabulous. 😂

[@grader32]

@@cbailey2376 😎

[@zachrobinson-s9o]

Any citrus oil will remove stickers.

[@zachrobinson-s9o]

All you need is a piece of peel

[@onelastlap9302]

Cool, thanks for sharing!

[@jankeeso]

Acetyleenburner

[@333MediaBestia]

Wtf que boludes

[@adityanaik2706]

Glue

[@mlee6050]

Might sound odd but how do you make stickers permanent? I just got a Emonda ALR frame and want name on it unless is there a professional to pay a bike to do?

[@onelastlap9302]

Best bet would just be high quality decal with your name. It sounds like a permanent option like you’re saying would require repainting your name under clear coat

[@superslimanoniem4712]

I bet you can find a way to etch or engrave it?

[@harrygooch834]

Would never of believed superglue would work this good until I tried it. Thank you

[@rouxenophobe]

CAAD8

[@Carl_Johnson1980]

OMG😮 bluetooth device is ready to pair

[@todes_duo]

9.99 ???

[@onelastlap9302]

99% isopropyl

[@MaNNeRz91]

So what was the trick exactly

[@javiervizoso5001]

Wuaa ahora si podre descansar creo que mi vida esta resuelta justo ahora

[@ii-wo2dd]

Cannondale😊

[@onelastlap9302]

👌👌

[@neillechner4091]

Bremsen-Reiniger! oder Aufkleber- Spray! 😎👍

[@onelastlap9302]

Also should work well!

[@cbailey2376]

Auch wirksam.

[@mjohnny9949]

Use paint stripper 👍

[@onelastlap9302]

Might also strip paint?

[@mjohnny9949]

@@onelastlap9302 it's a joke

[@wearemotorhead4747]

Dydkiem sobie pporaj.

[@eduardourias3496]

Eu arranco isso com a unha

[@onelastlap9302]

Can work if high quality sticker, but I find cheap stickers don’t peel off as one piece well

[@СергейСавченко-ы8д]

Спирт!😃

[@onelastlap9302]

Yes!

[@rodolfoo3015]

Finally I can remove the stickers from the rental bike I stole with a fake id

[@onelastlap9302]

Not a big bike theft fan

[@rodolfoo3015]

@@onelastlap9302 same, was just joking

[@ManavMoladiya]

એ કયા હે

[@onelastlap9302]

Sticker removal from bike frame

[@spelyt4284]

Mene bhi ek fpv drone bana hu but camera install nahi kar paya budget nahi tha 😢

[@cubone44]

$9.99 I’ll take it!!!😂

[@onelastlap9302]

😂

[@Shadx9]

He Acts like He found out something new 😅

[@mhaez5449]

He ain't acting like one? Hes just showing how to remove a sticker?

[@dennisd4452]

What did he use?

[@onelastlap9302]

Isopropyl alcohol

[@cbailey2376]

Nail polish removal. 😂

[@sopepos1312]

Simply Unsimple 😂

[@rjunai]

or hair dryer to soften the glue... scraping a plastic spatula... works well around here...

[@onelastlap9302]

Good tip!

[@zaika_kitchen_786]

Op

[@Bikeops2021]

Oxyacetylene torch!

[@onelastlap9302]

😅

[@georgez123]

Now its a rockride AHAHAHAH

[@BetrThnYou]

Why is a $9 sticker on your frame?

[@onelastlap9302]

Haha no idea, was a customer bike

[@edgardomunoz6611]

If that’s the price, I want 2😂

[@BetrThnYou]

@@edgardomunoz6611 same I'll get 4

[@TheRainmanBachelor]

Use a plastic razor blade.

[@onelastlap9302]

Heard this suggestion before too, will be looking to get one!

[@throttlebirdjdm4168]

What's that substance you used?

[@onelastlap9302]

This is denatured alcohol, but isopropyl should also work well

[@throttlebirdjdm4168]

@@onelastlap9302 okay, thank you 😊

[@CUTE_ALONE_BOY]

​@@throttlebirdjdm4168 j

[@pravinmane8705]

terpaint oil hai bhai vo

[@Ishu_Vlogs11]

Kya cheez hai wo?

[@marcosgp8424]

Wd-40

[@onelastlap9302]

👍

[@vadimone8695]

Heat it up

[@AmandaBurger-wd4lw]

Card and goof y'all

[@denislop9092]

🔥🔥🔥

[@onelastlap9302]

😊🙏

[@sreenivasulukancham9872]

Which liquid did he used

[@onelastlap9302]

Isopropyl alcohol 👌

[@Randy-ry9ss]

Corrosive acid......Hence the gloves.

[@rafabehrendt3817]

Terpentyna 😊

[@onelastlap9302]

Thanks for suggestion 😊

[@s.1281]

Феном нагреваешь и через 5 секунд убираешь клей

[@onelastlap9302]

Heat can also work, and can be good mix with solvent as well, depends on sticker