Simple warping hack

[@SBVancouver]

For my rigid heddle loom I went to my local fabric store and bought the thinnest flocked plastic tablecloth I could find and cut it the width of my loom. Now I never have tension problems when I use it along with a diy tensioning device using rods. The flocking doesn’t allow the threads to loosen. It’s reusable and if it wrinkles I use a pressing cloth over the flocked side and the wrinkles come right out with ease. Works great every time with no headaches.

[@KellyCasanova]

That's a great solution!

[@RedBloodyDog2023]

Just like a knitting machine with weights. Amazing Kelly. We just need to learn to think outside the square

[@KellyCasanova]

Yes, very similar to the claw weights 😊

[@kathleengerwien845]

Thank you so much for sharing this trick! I have struggled to get the craft paper to wind on the back of my rigid heddle looms, even when I have an assistant with me. I can’t wait to use this idea!

[@KellyCasanova]

Great, I hope it makes all the difference 😊

[@Loyal-cat]

I’m a beginner rigid heddle loom weaver and I purchased my clamps to use when dressing my loom. Thanks for another great tip.

[@TamarLitvot]

Simple and perfect! Thank you!

[@KellyCasanova]

You're welcome! ☺️

[@sallyboyd1212]

Great idea. I use the whole roll of craft paper. It lays on the floor and I put a full bottle of wine that I didn't like to hold the roll. For my latest weave, I have it hanging on a band under the loom (RH). I'm thinking of getting the corrugated paper for my 4-shaft loom.

[@joolzmurray5751]

Only empty bottles of wine in my house hic🍷

[@elizabethsielaff3414]

😂

[@elizabethsielaff3414]

Hi Sally, I have the corrugated paper and it is effective for the floor loom. Only limited use on a table loom, however, due to how much it increases the diameter of the back beam. Not sure what type you have for your 4shaft loom.

[@sallyboyd1212]

@@joolzmurray5751 Mostly empty in my house too - but I got several bottles of things I didn't think I'd like, so they have a bit of weight. Doesn't work with the roll now hanging from the loom stand.

[@sallyboyd1212]

@@elizabethsielaff3414 I haven't bought any yet. I have a LeClerc Nilus 45" - so probably enough room for the increased diameter. But somewhat expensive with an extra charge because of the length - so I haven't done anything yet.

[@stephaniebradfield908]

For those in the US, Ewenique Astrid has roll holders for your craft paper.

[@sharonsnow5685]

wow great and easy fix thank you so much

[@KellyCasanova]

You're welcome! 😉

[@judithmitchellthedevotedlu3087]

Goodness, I thought I was the only one having this problem. Thank you so much for the tip. I'm getting myself those clamps right now.

[@KellyCasanova]

You're welcome!

[@dorym8045]

It never occurred to me to weigh down my brown paper! Will try this on my next warp. Thanks.

[@reaseAable]

Great fix

[@elizabethsielaff3414]

Can't wait to try this on my next Rigid Heddle project! Thanks Kelly 😊

[@KellyCasanova]

You're welcome! Such simple tricks can make a difference 😊

[@cristi1924]

What a great tip Kelly!!! and it's something so easy to buy 😊

[@KellyCasanova]

Exactly. I'm not a fan of single purpose tools, I feel good about buying something I know I can use for an assortment of functions.

[@S.RMarigold]

Great tip. I use fiberglass wallpaper but this looks like a beter option.

[@KorenaiAcorn]

When you really need extra help and you have something you can turn into a tool, I say go for it. If it looks silly, but it works and doesn't turn into a problem, then it counts!

[@KellyCasanova]

Exactly, doesn't matter what it looks like!

[@robertrobert5583]

Thank you for this tip. I can see how this works when the paper is nearly wound on but, at the beginning of the wind-on, most of the paper is on the floor so do you move the clamps down sides? Best wishes.

[@KellyCasanova]

I cut my paper into shorter lengths so it's not usually hanging down that far. You could try the clamps on the sides, that would likely help.

[@carolbushway5612]

Kelly, are those clamps about 6 inches (15 cm) 8n length? This hack seems to be just what I need

[@KellyCasanova]

Mine are sold as 9" clamps, I have a link in the description below if you want to see the exact ones I use to get an idea of what you might like. There are a lot of 4-6" clamps that are similar but I find the slightly larger size more versatile and have a little more weight to them.

[@HelenMesserly]

Is the craft paper you use 30 lb or 50 lb?

[@KellyCasanova]

I don't know about poundage as most things are measured in grams and kilograms here. The paper weight I use is 125gsm, if that helps!

[@HelenMesserly]

@@KellyCasanova Well, 125 grams is only a bit over a quarter of a pound, so I think they must use a different way of measuring. I guess I can just order one, and if it's not right, I'll give it to the grandkids to draw on. Too bad we can't all be on the same standard!

[@KellyCasanova]

@@HelenMesserly The "gsm" means grams per square meter. That probably doesn't help you either 😆

[@HelenMesserly]

@@KellyCasanova Actually it at least makes sense to me now. I think if I can do the math, I'll be able to figure it out. Thanks!

[@KellyCasanova]

@@HelenMesserly Great! Your mathematical skills are obviously superior to mine!

[@patshipp9195]

💖💖👍👍🙏🙏👍👍💖💖