Simple ways of identifying a good and genuine Generator....

[@bencoinstitute]

If you like our videos pls do well to subscribe,like and share. also kindly support us to keep this channel running and produce better contents by buying us a coffee via this link www.buymeacoffee.com/bencoinstitute Any questions Drop them in this section...we will attend to them

[@T0licYanki]

Excellent explanations. Nevertheless, I have to point out that what you are referring to engravement is actually embossment; engravement produces a recessed letterings or markings, while embossment produces a raised lettings or markings. However, your explanation accomplishes the same goal.

[@bencoinstitute]

Thanks a lot Man

[@chisomstanley51]

well done brother. we need more of these types of videos for almost all products in Nigeria.

[@sanctusetverus]

Thank you very much. This is very useful.

[@bencoinstitute]

You are welcome

[@obongprincewill1760]

Nice update thanks alot. Please how can be differentiate a Copper coil from an Aluminium coil when going to get a New generator?

[@bencoinstitute]

You can hardly do that though because there is only a small opening that allows you to see the alrernator. However be rest assured that most brands uses copper alternator... But when in doubt speak with the seller and tell him/her that you want a genuine copper alternator and using the right words and tips he will handover a good alternator to you Once again... Kindly note that Major generators like Elemax,Firman,Tiger and Elepaq constant comes with a copper alternator and if the gen has not been tempered ,you will get a copper alternator 100% of the time. If it has been tempered you will notice from the bolts... They would be distorted a little as spanners has been used on them... mainly check around the alternator end cos that is were the Damage was done If you notice something like this kindly avoid the generator I hope i have been able to help

[@obongprincewill1760]

@@bencoinstitute thanks alot. A copper coil is much better than an aluminium right?

[@providential5569]

After hearing the price I had to check how long the video has been 😂it is well in this country

[@bencoinstitute]

U Don see am na

[@gentlemarkyunusa4453]

Thank you Sir

[@ABAHELIAS-dj3cx]

Wonderful update

[@bencoinstitute]

Thank you

[@lifesfate3073]

Thank u man❤

[@ariwodotochukwu4315]

Hello Benco, May i know if same procedures in the video are applicable to identify an Original Elepaq Constant Gen or there is a separate video for Elepaq?

[@bencoinstitute]

It is almost similar I made a dedicated video for that

[@ariwodotochukwu4315]

@@bencoinstitute Thanks. I eventually saw the video 🙏.

[@elohormene-enaike7260]

Thank you for this premiun update🤗 By the way you are looking so cute 😊

[@bencoinstitute]

Thank you so much

[@edemasunday9451]

Thanks for this update

[@bencoinstitute]

Brotherly Thanks ❤️

[@ayoolapauloluwamayowa7067]

I plan to get a medium gen. Which type or brand will recommend please

[@micheal2052]

Firman generator SPG3000

[@bencoinstitute]

Get an Elepaq constant You won't regret it

[@makuochukwu]

@benco is elepaq constant same as elepaq constant by yaofeng? Is there any difference between the two?

[@kennedyekeh3056]

My greetings Benco. Your videos are very informative. Please I intend to buy Itec generator. Do you have any idea of the reliability, noise level, fuel economy and availability of spare parts. I look forward to your urgent response.

[@bencoinstitute]

I don't fancy Itec

[@rmd14allj]

Hello thanks for the video. Is there anything like original elepaq (that carries only elepaq as the name) or its always elepaq constant...which lines of elepaq is best and is the kva true as stated. Eg 12kva. Thank you

[@bencoinstitute]

well there are Elepaq generators that could be Original, but overtime Elepaq constant generators are the best to me...

[@sarahtony9043]

Good day sir.. Good explanation too. Pls I misplaced my fireman electric starter keys. Pls can it be change and where can I buy the key part pls? I really need help sir..

[@bencoinstitute]

@@sarahtony9043 Get from any generator shop... Ask them for the keys... It's the same for all Gen

[@sarahtony9043]

@@bencoinstitute sir I have gone to shops that sells Gen... but they said they don't have. I live in lagos sir,around iyana ipaja axis. Can you pls refer me to any? Thanks for your quick response sir

[@apkmd]

Is this gen still available?

[@bencoinstitute]

Which pls For purchase of Generators chat [phone]

[@austinfametv8330]

But how would one know if they've opened the engine and remove the original copper coil and replace it with fake aluminium? Is there any way to know if they opened the engine?

[@randomposts6126]

Good morning pls is mobil oil the best for generator ?and does quality of oil have effect on a generator? Bcos I don't have money I have been using all those road side generator oil that they measure in bottles that old women sell. Pls advise

[@paulraymond5317]

What brand and capacity of generator do you recommend that can carry three 1.5 horsepower ac, every other home appliances including the fridge and electric iron for a 3 bedroom apartment and a 2 horsepower sumo at the same time???

[@bencoinstitute]

Personally I tend towards Elepaq constant this days... It's my go to for mid budget generator Elepaq SV 22000 will do the needful

[@micheal2052]

I don't think elepaq 22000 can do so , except if the Ac's are inverters

[@masterlightjames950]

Is Corolla good and reliable in your opinion?

[@bencoinstitute]

No it is not

[@masterlightjames950]

@@bencoinstitute okay. Thanks

[@Quickphonesolutions]

Why do you say so?

[@prymnet8594]

Please which oil can I use for SPG 8000E2

[@bencoinstitute]

Sumec fireman has their brand engine oil In absence of that you can use Golden super... Happy new year sir/ma

[@ezekieleffiong2095]

Please can a 4.5kva Corolla generator power a 200A welding machine?

[@bencoinstitute]

No,it cant

[@ezekieleffiong2095]

So which one can power it

[@bencoinstitute]

@@ezekieleffiong2095 You need about a 7.5kva gen for it

[@Quickphonesolutions]

Is corolla generators good?

[@nwaekejulietchimeruo4866]

Pls am interested in buying 10kva firman used one that is still sharp. Please notify me if it's ready

[@bencoinstitute]

Chat me up on [phone] WhatsApp

[@miracleosinachip7311]

Please how much is 3000 sumec firman And what is the meaning of copper

[@sarahlistic5451]

Please, between Elepaq and sumec firman Which do you think it's best to go for?

[@bencoinstitute]

Well There ia a video in the works for this However i will advice we base our discourse on Elepaq constant and not just Elepaq...there is a wide variety of Elepaq generators and Elepaq constant tops it all Either of Elpeaq constant and sumec fireman are of top quality...no pinpoint difference between both Anyone you get is quite Okay I hope this helps

[@templeigbinosa7356]

Wow

[@onyex47cchukwukelo11]

Still available?

[@bencoinstitute]

Yes WhatsApp [phone]

[@buenosmayana6582]

Remember guys… the firman spelling does not have E

[@bencoinstitute]

Absolutely

[@danidhos2062]

Were is ur Location, I need 10kva elepaq

[@bencoinstitute]

We are in Delta state, we can deliver the Gen to any location in Nigeria [phone] WhatsApp contact

[@peleerel2314]

Please how much is sumec fireman 3000 I want to buy from you

[@justcruise1855]

Na your face be this😁

[@bencoinstitute]

Na my face ooo