MACHINE EMBROIDERY FOR BEGINNERS USING MY BROTHER ONE NEEDLE MACHINE. HOW TO EMBROIDER A SWEATSHIRT.

This is a machine embroidery for beginners using my brother innovis 2500d, I'm a beginner at embroidery but love embroidering on clothes.
In this video i'm showing you how I Embroider on a sweatshirt with easy placement. I'm floating the sweatshirt instead of hooping it.
I'LL SHOW YOU A COMPILATION OF EMBROIDERED FONTS AT THE END.
Fonts from the video
University font
bubble gum font
bella font
College Applique font
Faux chennille font
I also love Sewing clothes from scratch and mostly sew clothes for my daughter and myself and other women in my life.
You will find sewing clothes tutorials on my channel!
I would love to inspire you to make your own handmade wardrobe
as well as other beautiful handmade things and I would love to be part of your sewing journey. Subscribe If you find my channel helpful. You can also follow me on Instagram @simplydelilah1.
And visit me at
www.delilahtho...
/ simplydelilah1
Shop with me: www.etsy.com/s...
Music by Mr. Jello - Summer Sunday - thmatc.co/?l=4...

[@move2worship]

I love how you show your process even as you are learning. It helps to know that I may make the same mistakes and that it is okay. Thank you for your transparency. This is great!!

[@SimplyDelilah]

You are so welcome! yes there is a bit of a learning curve with machine embroidery

[@lalithanagarajan1055]

You did a great job. Yet you are so humble that you acknowledge your learning isn't quite great. It's a virtue indeed. I liked your video very much and how the embroidery turned up was beautiful.

[@SimplyDelilah]

thank you so much 😊

[@thecraftingboutique]

Eazy Peezy!!!! This was so simple. Thank you!

[@SimplyDelilah]

you are welcome

[@kathysmigen3927]

I love how you mark both the hoop and the item for better alignment. I’m definitely going to try that as I have trouble with it. Thank you for this video!

[@SimplyDelilah]

You are so welcome!that is the best way I could figure it out…I use to have hours of frustration trying to hoop or float it right.

[@puledressdesigns]

Love your sweaters and love the video. I never thought I’d enjoy embroidery videos but I am loving what you are doing.

[@SimplyDelilah]

Thank you for saying hi! and watching

[@SuperCgonz]

I love the festive sweater!

[@SimplyDelilah]

Thank you!

[@barbarameehan113]

I like your attention to detail. Great tutorial.

[@SimplyDelilah]

Thank you!

[@darygal64]

You’re so good, LOVE that technique! I got my machine Feb. 2020, watched a bazillion YT video and jumped in, I love it. I need to start looking for sweatshirts todo more!

[@SimplyDelilah]

Awesome! Thank you! Sweatshirts are my favorite!

[@karmencurry5955]

Thanks!

[@SimplyDelilah]

i appreciate that thank you!

[@ArgoAlley]

Thank you for sharing. I've only embroidered on one Tshirt so far but it was so easy. Still learning though. You make it look so easy. ☺️

[@SimplyDelilah]

You can do it!..and it takes practice..but i improve my skills everytime

[@monicajackson7266]

I would like to suggest, you invest in magnetic hoop, painters tape around hoop keeps the spray adhesive off your hoop, and sticky back wash away stabilizer works awesome on strechy/sweat/tee shirt fabric. Good Sewing!

[@SimplyDelilah]

Thanks for the tip! I have done the painters tape around the hoop! that really makes a difference.

[@coleenrosselit7912]

So cute!! 😍

[@SimplyDelilah]

Thank you!

[@user-xs4nn5vc9w]

You did a great job.

[@SimplyDelilah]

thank you!

[@kathleencrumbaugh8050]

Hang in there!! I put heat n bond lite on the back of the fabric you are appliquéing. It makes a huge difference when cutting out around letters etc and your fabric won’t fray. My first machine was Innovis 1200. I struggled with onesies. If I talked on the phone while doing it, I inevitably got the back caught up in the stitches 🤦🏻‍♀️. You are doing an awesome job!!

[@SimplyDelilah]

Great idea!!that makes so much sense because I use to appliqué on my regular machine and always used that to stop fraying…duh! Not sure why I didn’t consider that! Thanks for the encouragement

[@kathleenhamel8512]

Good job!

[@maxinekershaw6589]

Love your work. I went to look for your embroidery machine but it’s no longer available. Wanted a machine last year but didn’t get it but you make me want to get one. Thanks for sharing

[@SimplyDelilah]

Thank you so much for watching...I have been enjoying mine so much!

[@laurielasley6568]

Applique scissors work great for the trimming.

[@SimplyDelilah]

Great tip! I have gotten much better at applique since then!

[@tourinojacks5844]

What are applique scissors?

[@margaretmayhew8072]

Thank you for helping us be more successful in our embroidery! May I ask where you get your sweatshirts?

[@SimplyDelilah]

I just buy the them if they are on clearance.:.mostly Walmart has really good ones to embroidery on and the gliddan brand is my favorite and I will just pick them up at Joann if they are on sale. I’ve tried some from shein.com but those are not as good quality

[@marta77inf]

I appreciate your honesty. I do embroidery often. But applique terrifies me. I enjoy your tutorial. Thank you.

[@darygal64]

I was wondering where you got your sweatshirts from also. I also pick them up whenever I see a good deal but not as nice colors you have .

[@beatrizalberto4666]

Hi, I love your videos and the font of your sweater (Thankful). I have tried to find it through Universty font but no chance... would you mind to share the link or where may i find it? Thanks!

[@sylviah1234]

You do not need the water top stabilizer . Use it with things like towels with a higher nap.

[@pambrown8378]

I use the water soluble for everything. It makes the stitching so nice.

[@cricutobsession88]

Hello I love your videos !! For the print out for example if your using a 4x4 hoop the size of the print out needs to be a 4x4 also ?

[@SimplyDelilah]

Yes, correct, you would print it on your 8x11" paper and then cut around the image and the image should be no more than 4x4"

[@StephTheOriginal]

Hi. Could you explain What is the thing you print out and apply to the shirt first? Do you print out the design with a regular printer? How does the embroidery machine know how to follow the design?

[@SimplyDelilah]

hi, I use the embrillance software to print out the design and this video also shows how I did it. kzbin.infotqgVIabTLI0?si=BU5iVGZlA7iINHKA

[@rachelle466]

Ohh I love this video, very approachable and understandable. But I do have a question.... embrilliance has fonts? As I have v2 and there was only 1 font...

[@SimplyDelilah]

Yes it does! when you purchase embrilliance it comes with about 12 fonts I believe

[@PedroRodriguez-he1ou]

Hello I am new to embroidery, i enjoyed your video. i have a question why do they flip the garments inside out to embroider? I still do not understand that concept. thank you for your help.

[@SimplyDelilah]

Good question! it is flipped inside to put the stabilzer in it.

[@amber1259]

Did you put the sweatshirt on top of the hoop? Also did you spray the top water soluble stabilizer with basting spray too?

[@roxannestarbuck3093]

Do I need stabilizer for top and bottom?

[@tourinojacks5844]

Nice video. I was wondering which version of Embrilliance did you purchase? I am getting it but unclear of which one I need to be able to do touchups to delete jumpstitches in advance when digitizing.

[@SimplyDelilah]

hi, I got the embrilliance Essentials version. I ilove everything it can do! although i'm not sure it will cute j umpstitches.

[@tourinojacks5844]

@@SimplyDelilah I would look into to that. That seems like it would be an "essential" tool to have in embroidery software. In your video you said it is easy to embroider beanies. Did you make a beanie video by chance? If so, can you send it to me or post the link here? I'd like to learn how to do that before winter comes back around. :)

[@SimplyDelilah]

@@tourinojacks5844 Hi...i bought those beanies at all a dollar to practice on. you can also get them for about $3 on the Shein website.

[@greentdesignco4229]

It's because of the puckering. You can see on your sweatshirt you make there is some puckering. Cut away 1 or 2 layers will prevent that.

[@SimplyDelilah]

thank you!

[@ileanasantana5024]

Me I ask which font is that in your sweatshirt the color I appreciate

[@nancyvb788]

i would like to know if it a sewing M. too. i would like to learn more on sewing.

[@SimplyDelilah]

Hi Nancy, I do have lots of fun sewing videos too! Thank you for watching.

[@nancyvb788]

their is so many modles off sewing M. can you tell me the bestone, to streat with. ? thank you for the reply..

[@KrishnaPawar-r3z]

Witch fabric use for t shirt

[@marymacnally8602]

Please can you tell me if your basting stitch is built in on your machine, or can I get them online. Thank you.

[@SimplyDelilah]

I add the basting stitch when I create my design in the embrillance software..but also my machine has the basting square that I can add on to any designs..I hope that answers your question..

[@jw8453]

You said beginner!! I don’t know what you are talking about! How did you print out your what ever ?? You didn’t explain anything ! I am a beginner with a machine

[@Muhsinahnadeem]

Did you find a good beginner friendly tutorial? If so please share

[@angeliqueayala8023]

Where do you get basting spray?

[@SimplyDelilah]

i buy it on amazon...its cheaper..its soo expensive at Joanns. I think its around $11 on Amazon

[@angeliqueayala8023]

@@SimplyDelilah Thank you for your quick reply.

[@sylviah1234]

Slowing your machine down will help the stitches to look better.

[@sonyasew2]

You use 3 stabilizers

[@SimplyDelilah]

I used 2 underneath and the top is suppose to make the top stitches look good 😊

[@darygal64]

What was the first one you put down called?

[@LillianRamirez-c9h]

Increase your density

[@busydeb6930]

Hello!!! Thank you for all your wonderful work and great tutorials too!!! I am new and wondering how to get a printout like you do for each design since I am currently using Embroidery Library and Urban Threads for my designs I don't see that option. Is there a way to do that on their website? Thank you for your help! @simplydelilah

[@SimplyDelilah]

hello...when you purchase a file there should be a pdf or jpg imaged attached that you might be able to print from. I print mine from the embrilliance softward.

[@craftymystic4868]

Thank you, I have an embroidery machine and software, secondhand so was a bargain and I wasn’t really looking for that feature. Just a new machine, found on Facebook Marketplace. Anyway, really have avoided actually embroidering, but this makes me wonder if there is a dimension I’m overlooking. Love the results, for sure. Have all the thread and stabilizer too. 🫢

[@SimplyDelilah]

Oh my gosh you are lucky! You need to take advantage of that feature! You will love it 😊

[@karmencurry5955]

Thanks!

[@karmencurry5955]

Thanks!

[@karmencurry5955]

Thanks!