Simulation of Lithium-Ion Battery Pack with Paraffin Wax & Fluid Flowing Through Serpentine Channel

[@AhmadRaza-qo5rz]

hi can you tell me what is the specification of each cell in the battery and also if you have the relevant research paper it will help me a lot

[@FrontiersInCFD]

18 mm diameter 65 mm height

[@AhmadRaza-qo5rz]

@@FrontiersInCFD no I mean voltage specifications??

[@AhmadRaza-qo5rz]

have you specify the discharge rate of the battery in the simulation

[@FrontiersInCFD]

yes specific

[@OmkarBajpai-ei5nf]

Please add casing video in it please guide ho to add casing

[@SKSKREMO_3]

Can i get this model?

[@usamatariq-jutt]

hi, what is channel wall thickness?

[@FrontiersInCFD]

0.5 mm thickness

[@usamatariq-jutt]

Thanks, how you select 5C heat generation for lithium cell, and how you select heat flux in cell walls why 2, like some formula or given.

[@usamatariq-jutt]

​@@FrontiersInCFD??

[@FrontiersInCFD]

If you know cell dimension you can calculate volume of cell. Also if you know the voltage and dischrge current you can calculate heat ge eration per unit volume and heat flux also

[@AhmadRaza-qo5rz]

kindly can you tell me that if i change the time for the simulation solidification and melting can be observed ?? if applied the same methodology ??

[@FrontiersInCFD]

Yes you can visualize. If you take smaller time step size then time required will be more

[@AhmadRaza-qo5rz]

hi bro . bro the total temperature in the battery is 300C.is this correct because i am finding some reference to find it . can you please tell me or quote some paper

[@FrontiersInCFD]

I will check i received these parameter for which i have done simulation

[@AhmadRaza-qo5rz]

can you please tell me this battery can be used for the automobile i mean car

[@AhmadRaza-qo5rz]

???

[@FrontiersInCFD]

@@AhmadRaza-qo5rz yes it can be

[@AhmadRaza-qo5rz]

hi i can't see the google drive link here

[@FrontiersInCFD]

have you join membership?

[@AhmadRaza-qo5rz]

@@FrontiersInCFD no where to join

[@FrontiersInCFD]

can you connect with me on what's app [phone]

[@mindandsoulclub7679]

None of your simulations have actually showed contours of solidification and melting. You should be more detailed in discussing results, if we can't see solidification and melting then there is no point of PCM simulation.

[@FrontiersInCFD]

Ok

[@AhmadRaza-qo5rz]

Hi can you tell me the research paper name for deep study please

[@FrontiersInCFD]

It was one of the requirement from client