Simulink Tutorial - 66 - MBD Interview Questions | Part 7

[@oguzhancebe9833]

I loved this MBD Interview Series! Note: You forgot to add this video to your playlist.

[@deepikawakchaure5688]

All videos are just amazing... I wish I new it before... thank you for your efforts Namrata.. good job

[@jitendernimiwal8128]

Commendable.. Very informative. Thanks for the video

[@gauravpatil4845]

Please make a video on fixed point model and floating point model

[@PalaniPandu231]

Hi, All the videos are most useful for us..I like to learn more on 1) selecting data type for adder 2) auto code generation using target link 3) way to start modeling

[@JyotiSharma-sh3hc]

Hi Namrata, please tell me difference between Step size and Sample time and which has higher value.

[@simulinktutorial9086]

Suppose you are working on a feature which has two functions. One function is updated with 10ms whereas the other one at 20ms. In this case the step size will be 10 whereas subsystems of 10ms function will have sample time 10ms and the other one will have 20ms. So the step size is the least one. And sample time can be same as stepsize or integer multiple of stepsize.

[@JyotiSharma-sh3hc]

@@simulinktutorial9086 Thank you so much. Just one more question, can we create an infinite loop using Stateflow. Also your videos are very informative. Please do create more. Please do some videos on different logical questions based that are asked in interviews.

[@simulinktutorial9086]

Yes you can but, if you are implementing it in stateflow with flowgraph, it means the logic is stuck in loop in a given sample time, which you really don't want to do. And run something for infinite time with update at each sample, well that happens, if you give stop time for simulation inf, it will keep running till you don't hit the stop button.

[@purvawankhade395]

Can you explain difference between plant model and controller model

[@allupdates24hours]

Hi Could you please provide data dictionary usage.how it will works.

[@tejasd8711]

In parallel states anyways the execution order is defined, what to do mean both the states are active at the same time ? What is the use of it ?

[@saquibd]

Both states are active means in one execution cycle, both the states will be evaluated. In case of Ex-OR only one state is executed in one execution cycle.

[@kajalbadhe8505]

@@saquibd but we can simply run both states by giving same initial default condition to both states, can we?

[@saquibd]

@@kajalbadhe8505 If you are speaking of Ex-OR only one state is evaluated strictly in one task cycle. The other state will be evaluated in other task cycle. For running two states in one cycle they need to be parallel states.

[@prdfrnd]

Hi Namratha could you please upload videos on simulink to targetlink convertion and targetlink code for switch and for multi port switch....

[@Shikha_Katariya]

Hey can you plz tell about sequencing, how we give 1,2 etc sequence on that factor it is dependent?

[@simulinktutorial9086]

You have to right click on the state and you should see an option "Execution order". There you can change it.

[@Shikha_Katariya]

@@simulinktutorial9086 thank you 😇😇

[@bhuwanchandrabisht1693]

can you please create videos on storage classes in Matlab Simulink

[@mathakalaramesh0156]

Please provide mil testing totorial

[@rapide444xhilights5]

ARTCBNLM✅🔱🔳🔼🔽🔺🔻💠🔘🔲⭕🔵🔴⚫⚪🔳♨📛🔰📵📳📴💯☒☑☐✔✅🔱🔞AAAAAALLLLLMMMMMNNNVBBCCCXFXJJKJJJBBBBBBBKGJEYRBEOEGENIEBEKDGEBIDGHHHHHHHHHHHHGGGGGGGGGGGGGGEEUFTTTTYUYYYYHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHVCVVBBVVVVVVVVVDHYDJS

[@Khan71475]

dear namarta, can you provide your email?