Singer 319 Part 2

Welcome back to part 2 of the Singer 319 series. In this part, I finish the drawer faces, start the hardware, and show you the first look at the finished drawers. I also test the motor and remove all the electrical from the machine and remove everything from the main cabinet body.
I begin the work on the machine by cleaning the electric system and motor and putting that all back together.
The machine is now in a cleaning bucket. Next video I will get the pedal and knee control cleaning and working properly. I will also start cleaning the machine and hopefully get moving, and start sanding the cabinet.
I had a large order at the beginning of the year which didn't give me a lot of time to work on the machine until now. I hope you enjoyed the picture of the quilt. It was an amazing piece to create. I do have another large order that just came across my table, so I will be working on that and you should be able to see a video on that next week. You can look forward to another video on the Singer 319 next month.
If you stayed until the end, thank you. These are the machines in order as shown.
Brother Embroidery SE625
Singer Sew Quick Handheld sewing machine
Singer Heavy Duty HD6600C
Juki TL-2010q Commercial Machine
Singer Serger
Singer Heavy Duty 4423
Singer Featherweight 221 from 1953
Singer 128 made in 1941
I have plans on making in-depth videos on the Singer Featherweight and 128 later this year. Be sure to subscribe to see those videos.
As always, thank you for watching and ready this. Please check out my shop at www.creationsb...
All orders in my shop help to support this channel.
Intro and outro music is from Chach w/the Heat. You can find his work on KZbin / @chachwtheheat
All other music is from my TubeBuddy subscription. If you are interested in trying TubeBuddy, please use my link and help support this channel.
www.tubebuddy....
Thank you again. See you in the next video.

[@melenelewis2955]

I have the same Singer 319 but the one made in Britain 319k. Learnt to sew on it when I was 10 years old( now 68yrs). Still running but in need of a good clean and a new belt so I am very pleased to see your excellent videos.... Hope to see all the progress made on it and I will be following you in what you do sothat I can do my own. Thanks a lot for the instructions😊

[@CreationStudiowithLaLita]

Thank you! I am on a remote job right now but I plan to get back to this project once I am back. Hope you get yours cleaned and working soon.

[@gergemall]

Beautiful machine. Thank you. I’m researching resources for restoring vintage machines.

[@CreationStudiowithLaLita]

I am still learning and working on this one. Best of luck in your journey.

[@lisahillman1881]

Can’t wait for part 3. I’m hoping you tackle the bright knob. I want to take mine off and clean it but I’m chicken. 😅

[@CreationStudiowithLaLita]

I am looking forward to getting part 3 done but other things have gotten in the way of me working on it. I hope to get back to it in a few months.

[@annhamilton2060]

@@CreationStudiowithLaLitadid you manage part 3? I have just purchased a 320K

[@АлександрГладышев-и8о]

Спасибо🙏

[@chrismen1209]

Hi, I just picked up a Singer 319W and stumbled upon your excellent vids. Will part 3 be available soon?

[@CreationStudiowithLaLita]

Soon I am hoping. I am busy with the holiday season approaching and markets. But I am hoping to get it out by the end of the year. Thank you for watching!

[@АлександрГладышев-и8о]

У меня 320к ... Включаю обратный ход (реверс) игла ломается в чем причина?

[@CreationStudiowithLaLita]

The needle might be misaligning when going in reverse. It sounds like a timing issue. You may need a new belt or something is slipping when changing between reverse and forward.

[@АлександрГладышев-и8о]

У меня машинка новая

[@ViaSandee]

I’m interested to know how you remove the top of your sewing machine… Three

[@CreationStudiowithLaLita]

I will be working on part three soon. Time got away from me and I'm busy with the holiday season and markets. So I hope to get back to it soon. Thank you for watching.

[@doralisaariasastorga3105]

Por favor, haga un vídeo en español " ya " me iría a la tumba agradecida de usted. Soy de chile.