SINGER® SEWMATE™ 5400 Buttonholes

[@phaedracannon6662]

This is a good tutorial. My sew mate 5400 is only doing the one side of the buttonhole.

[@brigidbac1438]

Have you tried to switch to another model of buttonhole? It works.

[@anya_lawliet]

Omg This was so helpful! Thank you so much and stay crafty 😁

[@SingerSewingCompany]

We're so pleased that you found it helpful, Anya! Happy sewing! - AB

[@janethcastaneda3810]

I don’t have a bottom hole presser foot not sure if I lost it or it wasn’t included in my machine but I want to buy one does it has to be exactly the same from the one on the video or any will work? Because I went online and found a few that are supposed to be for my singer but doesn’t look exactly the same.

[@undercoloroflaw]

It would have been so satisfying to have seen the button actually go through the hole she just made...WHY?....LOL

[@barbaracleary235]

Can you please tell me how to put the piece back on that goes behind the round piece that has the clips on it where the bobbin goes that far back round piece that catches the thread it fell out someone PLEASE let me know how to make it stay

[@SingerSewingCompany]

For further assistance, please contact our Customer Care Team at 1-800-474-6437 or email them here: www.singer.com/email-us/. Thank you!

[@victorialagos4869]

Nececito repuesto palanca tirahilos como conseguirla

[@SingerSewingCompany]

Hi! Thank you for reaching out to us with your question. To better serve you, we need to request more information, so please reach out to us on our other social media platforms: Instagram (@singersewingcompany) and Facebook (facebook.com/SingerSewingCompany/). Thank you! -TB

[@tennysonblaine4874]

Help please , when i set my setting to 56 for bottonholes the midle setting automatically goes to blank and the machine will not work at all .help me please

[@SingerSewingCompany]

Hi! Thank you for reaching out to us with your question. To better serve you, we need to request more information, so please reach out to us on our other social media platforms: Instagram (@singersewingcompany) and Facebook (facebook.com/SingerSewingCompany). Thank you!

[@tennysonblaine4874]

@@SingerSewingCompany thanks for responding so quickly , is there any other form of media i can use to send u better information unfortunately i dont have an instagram account .facebook or whatsapp by any chance ? Those are the only two i use thank u

[@SingerSewingCompany]

@@tennysonblaine4874 Hi! Our Facebook page is (facebook.com/SingerSewingCompany). Thank you! -TB

[@gracehan7895]

Hello, When I tried to to do the button holes, error C2 appeared. I have tied to do it again with putting the buttonhole lever till the end, but it didn’t work again and just showed error C2. Please help. What should I do.

[@SingerSewingCompany]

Hi Grace! C2 error is the buttonhole lever is not fully engaged. If you have already tried resetting it without positive results, I would suggest taking it into a dealership that does repairs and have them take a look at it. I hope this helps. Thanks! -TB

[@svirginiapereztandstad3614]

@@SingerSewingCompany the same problem with my machine. C2 error.

[@SingerSewingCompany]

@@svirginiapereztandstad3614 Hi! Have you checked to see if the buttonhole lever is fully engaged? If you do check that and the error is still showing, please reach out to a dealer to see about a diagnosis/service. Thank you! -TB

[@mryttersgaard6970]

I got the C2 error because I hadn’t pulled down the actual lever that engages the buttonhole foot. Once I did that it was clear sailing. 😊

[@tennysonblaine4874]

It works for everything except bottonholes

[@SingerSewingCompany]

Hi! Are you having issues with the Sewmate 5400? If you need more assistance, please reach us on Instagram (@singersewingcompany) or on Facebook (facebook.com/SingerSewingCompany). Thank you! -TB