Sink Faucet Repair, Delta Bathroom Sink Drips

[@neysabrooks680]

all you had to replace was the spring and washer, you didn't need to change out the stem.

[@JimVincitore]

Hi Neysa! Cool! Thanks for the info, I did not know that! Jim

[@gregl4065]

Hey dummy, he said that in the video. He said he probably just needed the washer and spring but he said he was gonna do the whole stem so he don't have to worry for another 10 years. 2:16 if you wanna hear it for yourself.

[@dimcawyt]

I just fixed my bathroom sink myself thanks for the video

[@bigtexas7580]

*I haven't been able to find only the spring and washer, only the kit with 2 springs, 2 washers, and 2 stems for $14 at home depot.This is probably the best bet.*

[@katielyb]

@@bigtexas7580 another hardware store is likely to have other options from different manufacturers or distributors.

[@terrihendee5718]

Love there chuckles together. Made me smile and taught me how to fix my leaky faucet. Thanks!

[@JimVincitore]

Glad you enjoyed it!

[@BIGDADDDY80]

4 yrs later still a great step by step video. Thank you

[@JimVincitore]

Welcome!

[@galan8631]

Thanks for the video! Saved me $250, standard plumber’s fee in NYS!!

[@Phoneladie]

Hello Jim and Mrs Vincitore, thank you for making your video. I replaced both of my washers& springs today on my kitchen Delta glass knobs. I had all the necessary tools to do the job. My boyfriend did the job and we took one set of washer/spring to my local Ace Hardware store to make sure I was buying the correct size. I found two pks of two washers/springs. One was a Delta product and the other one was an Ace Hardware product. The Delta 4 pk (2 washers & 2 springs) was $8.99 and the Ace 4 pk (2 washers & 2 springs) was $3.89. I bought the Ace product. Exact match to what needed to be replace. I also saved the receipt and part of the package for future needs. Thank you again for making this very helpful video.

[@JimVincitore]

Hi Eve! You're welcome! That's my ma, she's the brains of the operation!

[@blanchemitchell8508]

Thank you so much for making this video. Your verbal instructions were quite detailed, however, there were key points in the video that could not be seen on the video. The angle prevented a direct view of the faucet, specifically, the faucet replacement. The location & placement of the spring & washer was perfect. The camera angle was directly above the washer, close up, & very clear. Great view. Thank you.

[@JimVincitore]

Welcome. Yes, the camera operator 80+ years old.

[@dougsfield]

I loved this! Thanks so much. I was about to try and fix leak in our bathroom faucet and thought I better look on KZbin first. Glad I did.

[@JimVincitore]

Welcome!

[@jearlchamp]

Thanks for this video! Just fixed my dripping sink tonight.

[@aliciae2312]

Thank you for the tutorial. I am 53 year old divorced woman. Because of your video, I was able to replace the spring and washer. Good as new.

[@JimVincitore]

Hi Alicia! Great job! You're welcome! My ma is the smart one over here! LOL! Jim

[@MkUltraNasty]

I feel like I just had a session with my grandpa... best DIY ever

[@JimVincitore]

lol, gee thanks : D

[@JimVincitore]

I know a 40 year old married couple. The guy wished for a wife half his age. The genie granted his wish! BAMMO! THE GENIE MADE HIM 80 YEARS OLD!

[@alinafstrmom7725]

​@@JimVincitore😂👍😅

[@Pokav1deo]

Hello. I’m new to home ownership and wanted to thank you for this video. I followed the instructions and located the appropriate cartridge and the leak has finally stopped. Big thank you.

[@JimVincitore]

Hi Pokav! You're welcome! My Ma is the smart one here! LOL! Check out the vids we did on instaLLING A KITCHEN SINK Faucet, that'll save you a couple hundred, and it wasn't really all that hard either! Thanks for watching! Jim

[@ronnetteharvey2002]

You fumbled around in all the same way I did but watching you helped me to be able to watch and be stress free and I was able to understand! Thank you

[@JimVincitore]

YES, I'M A GUITAR PLAYER, NOT A PLUMBER! LOL! I LIKE WATCHING THE PLUMBER STEVE LAVIMONIERE VIDS, HE'S COOL AND FUN TO WATCH!

[@karloaquinde3476]

Thank you good sir for your tutorial and good humor. 😆😁

[@JimVincitore]

Hi Karlo! You're welcome!

[@merchseven7958]

Thanks for this video. Helped me today fix a leak and it was the seat washer that did it. I had no idea before about that part of the sink and figured it must be just that. Seeing you remove it helped! 👍

[@JimVincitore]

Cool! My ma is the smart one here! LOL!

[@ScreenPrintR]

I would like to compliment you both on how well you worked together. Kudos to you both.

[@JimVincitore]

Hi SP! Thank you! And you're welcome! Sinks still working great too! Thanks for watching! Jim

[@bhazen5510]

Thank you ao much for making this video. Fixing my dripping faucet was a breeze after watching!!

[@JimVincitore]

You're welcome!

[@mandigrrl]

Thanks!!! My faucet no longer leaked thanks to this video

[@evansales1812]

Jim knows a thing or two because he's seen a thing or two.

[@LockpickingsGal]

Thank you for helping me fix my drip of my first ever home!

[@JimVincitore]

You're welcome!

[@HellFire178]

as a DIY landlord your idea on keeping the manuals makes sense

[@gregorypettaway4558]

Hey, Jim. I just want to thank you for publishing this video. Although I have much respect for plumbers, electricians and carpenters, I would rather attempt to do small jobs myself and leave the heavy lifting to the professionals. I just had to watch less than 6 minutes of this video to get an idea of what I was getting into. Thanks again,

[@JimVincitore]

Hi Greg! You're welcome! I have a video where we replace a whole kitchen sink faucet, it's not difficult either. The kits at the hardware store make it real easy. I also have a few toilet videos where we did repairs, and I just overhauled another toilet (all new parts $19.00 from Walmart) again the kits at the hardware store make it real easy. And I'm not handy around the house, if I can do it, anyone can! Thanks for watching! Jim

[@isaacdriskell4705]

What your video does is give us the confidence we can get it done, thanks big time.

[@JimVincitore]

COOL! MY MA IS THE SMART ONE... : D SINKS ARE EASIER. WE DID A VIDEO ON PUTTING IN A NEW KITCHEN SINK FAUCET TOO. SALESMAN AT LOWES TOLD ME FAUCET MAKERS ARE MAKING IT EASIER TO PEOPLE CAN DO IT THEMSELVES. NO SOLDER THESE DAYS TOO, IT'S ALL COMPRESSION CONNECTIONS JUST LIKE IN OUR CARS.

[@izzymey]

I loved this! It reminded me of me and my families diy projects! Love your helper!!!

[@JimVincitore]

Hi Izzy! She's an expert at that stuff too! Jim

[@lauragreen7065]

Just wanted to say Thank you for making it sooo darn easy to understand. What a quick fix-Thank you again and keep up the easy to repair videos

[@JimVincitore]

Hi Laura! Thank you! My Ma is the handyman, I'm just the gopher! LOL!

[@urbanlovesrural]

Thanks for the intel , just repaired our RV on Vacay that sprung a leak 💎🥂💎

[@kathleenjmalmquist3015]

Thank you for sharing this tutorial. Tomorrow I will tackle this job for the first time. Years ago my elderly father changed my washers and when he was done the faucets turned 'backwards'. Now I know how that happened...lol

[@zandracerpa4461]

Great video. Thank u

[@Nat-mj9pt]

This helped me big time. I appreciate all of your videos. I learn a lot from them. Thanks Jim

[@Rodgerwilco91]

Thank you! This helped me a lot. Especially when you showed that you can push down to figure out which one is leaking.

[@Shyblues]

I just subscribed Jim ! 😊👍🏼 Love the interaction between you & your Wife ✨😊

[@JimVincitore]

Hi Shyblues! Thank you! That's my mother! LOL! Thanks for watching! Jim

[@graciephillips3958]

Thank you for sharing this with us.

[@JimVincitore]

You're welcome Gracie!

[@TenshiJuuSan]

I have the exact same faucet leaking on the same side. What are the exact parts you used? I do not know how to look them up.

[@JimVincitore]

I'll look for the number, the package might still be in the drawer.

[@TenshiJuuSan]

@@JimVincitore Many thanks for just even trying that for me.

[@treelinehugger]

One of your best tools is the camera in your smartphone. (The flashlight app is also handy.) Use the camera to take photos at each step of the disassembly. Reference the photos during reassembly. At 1:29, your video shows the original orientation of the valve (before you disassembled it). I suspect this was originally configured backward from convention (more on this below). At 11:03, your video shows that you installed the valve 180 degrees off of the original orientation. What is the correct rotation to turn a valve on/off? For standalone gate valves and stop valves, turning the valve counter-clockwise turns on the water flow. Is this how all valves should be configured? Think about lever handles. The levers for the hot and cold water valves are on the opposite side of their respective valve stems. The cold water handle is to the right of its valve stem and the hot water handle is to the left of its valve stem. This results in opposite rotations to turn on the water flow. - To turn on the cold water flow, pulling the lever toward you results in a clockwise turn. - To turn on the hot water flow, pulling the lever toward you results in a counter-clockwise turn. By convention, the rotation should not depend on what type of handle sits on top of the valve stem. Whether you have a lever handle or a knob handle should matter. The convention is to configure them as described above. This is very intuitive for lever handles, but some people get confused when using knob handles. There is no right or wrong answer. Either way works. So feel free to throw out convention and configure the valves the way you like.

[@jakeallen4494]

Thanks on helping me become a handyman around the house.. great video

[@shalom8858]

Thank you for the advice! You two are a great team! 😂❤️

[@JimVincitore]

Hi Shalom! It was a fun video to make too! Thanks for watching! Jim

[@gammatnt]

Thank you. I just follow your video to repair the faucet.

[@JimVincitore]

Hi Gamma! Thank you! And you're welcome! Thanks for watching! Jim

[@mts7274]

Why does the cold water OPEN when you turn it clock-wise? (righty tighty)

[@JimVincitore]

We probably have it set up wrong. 😀 Just flip it around to get it to spin the other way.

[@jjj-iz6pp]

How to tell the seat/spring is bad or good? After turn shutoff valve, if still drip, do you need to turn off main valve?

[@JimVincitore]

sometimes if you wiggle the shut handle around it will quit dripping. i think there is a rubber washer behind the handle that could be replaced. i'm dealing with the same thing in an upstairs sink...i just turned off the cold a few days ago. i think i'm gonna mess with it today. replace it with a compression turn off, they work great and you can install them without solder. i was told europe has been using them for years, and cars are full of compression fixtures. i had a plumber put them on my basement sink, took him ten minutes. i'm guessing, but you probably have to turn off the main before messing with the shutoff.

[@adrianelinam1536]

Thank you for this!!! You saved me alot of money!

[@RSPSpkfilms]

dem finganails boiii!!

[@JimVincitore]

classical guitar

[@JimVincitore]

How to Cut and Shape Your Finger Nails for Classical Guitar Acoustic Country Guitar Finger Picking kzbin.info/www/bejne/maW1h59sbJ2mqbc

[@JimVincitore]

🎸

[@MostlyBrenda]

Unfortunately, my faucet uses Moen cartridges. About $16 a piece! Thought I was just going to get by with some o-rings, seats or springs, but nooo 😮. Also, they were very difficult to pry out of the fixture.

[@Graham_Street]

Thanks for this, need to do this tonight, hot water leaking

[@Sabrina-ck5xk]

Thank you so much for this video. It helped me fix my sink leaking problem this morning. However, I wish I had paid more attention to the turn off the water part!! Oops.

[@fortunate953]

Thanks for the great tutorial. Bummer about the spring.

[@claudioleighton6799]

Thank you to both of you, Jim and his wife. If you make another video, it would be a great improvement if the camera were aimed better to the action, that means to Jim's hands which are doing the job. Sometimes i missed details that i would have liked to see.

[@JimVincitore]

Hi SH! The camera operator is the BRAINS of the operation, so she has to pay attention. She's 86 and going strong, better shape than me! Thanks for watching. Jim

[@maryrodger5130]

@@JimVincitore You two are a great team!

[@imbr0ly745]

You guys are adorable hehe. Thanks for the video!

[@manithor7572]

Thank you Jim; it was helpful.

[@JimVincitore]

Hi MT! You're welcome! Thanks for watching! Jim

[@LGAussie]

That part is usually $15, and lasts about 4 to 5 years. Delta will send u a replacement for free if u can show them which part it is. Unless u saved the box model number.

[@JimVincitore]

PUT IN THE ONES SO I DON'T HAVE TO MESS WITH IT AGAIN SOON. AND NEW ONES TURN A LOT SMOOTHER. NEW RUBBER WASHERS SO LESS WORN OUT RUBBER PIECES IN MY TOOTHPASTE WATER. : D

[@lindaharrison4039]

Cute video, you guys are a cute couple. I watched the video back to see which way the part went. :p Thanks for the tips and information.

[@JimVincitore]

Hi Linda! That's my ma! She's the one with the common sense and brains! LOL! Thanks for watching! Jim

[@wmbdisney8183]

Where did he get the washer if it didn't come with one?

[@JimVincitore]

ON THE SAME HARDWARE STORE RACK WHERE YOU BUY THE FAUCET PART, THEY HAVE A PACKAGE OF WASHERS FOR A FEW BUCKS. I THINK THE WASHER AND SPRING USED TO COME WITH THE FAUCET PART, BUT THEY QUIT INCLUDING IT. I THINK I SHOWED THE PACK OF WASHERS IN ONE OF MY FAUCET VIDEOS. I'LL TRY TO FIND IT AND POST IT HERE!

[@JimVincitore]

SEE VIDEO AT 4:30 Sink Faucet Drips Tricky Sink Repair Home Repair DIY kzbin.info/www/bejne/qIHIXmiCf8mNd8U

[@wmbdisney8183]

Thank you,

[@JimVincitore]

@@wmbdisney8183WELCOME!

[@capsrawesome0108]

Subscribed! Keep 'em comin'! ThankYou Jim! I need to fix My Dryer that won't heat up nomore..🥺

[@kerwin8883]

May not fix your problem but make sure your dryer vent is not plugged with lint or a bird nest! I have experienced this!

[@capsrawesome0108]

@@kerwin8883 ThankYou so much! I will definitely see if I can clean it out a bit.. Fingers Crossed this Works!🤞😚😺

[@JimVincitore]

Thanks for the sub! I did a video on that. There is a $10.00 fuse in the back you can replace yourself. If you push the dryer back against the wall, it crimps the exhaust hose, that causes the fuse to overheat and blow.

[@JimVincitore]

I was telling a salesman at Lowes about it, a appliance repairman was standing right next to him. Repairman told he that he's been working on dryers for 30 years and never heard of it. That's the power of KZbin.

[@JimVincitore]

Clothes Dryer Broke Won't Dry Clothes No Heat Replace Thermal Fuse kzbin.info/www/bejne/gpu3gaxpedGqarc

[@mercedesgou7352]

THANK YOU!!!! I will try tomorrow morning,

[@JimVincitore]

How'd it go? Did you try it? It's a pretty simple fix.

[@mercedesgou7352]

@@JimVincitore Thank you for asking!!! It went perfect, it is working well. You made me save some $$$ plus, with the pandemic I prefer not to have people from outside at home.

[@LOVE2Flute]

Excellent! Thank you very much, I'll give it a go today. Appreciate your help very much.

[@treelinehugger]

Why did you replace the cold water washer and spring? Didn't the hot water valve repair fix the leak? Maybe I missed something? Assuming the hot water valve repair fixed the leak, then the old saying applies, "If it ain't broke, don't fix it."

[@JimVincitore]

DID NOT HAVE TO DO BOTH. SINCE I WAS MESSING WITH IT, MIGHT AS WELL DO BOTH. NEW INSERTS TURN A LOT EASIER, SMOOTHER.

[@netnema]

I have a little dripping (but surely annoying though). I am not sure what side it is dripping from. Is there any way to find out, or should I just replace washers on both sided? Thanks

[@JimVincitore]

Is the water dripping hot or cold? press down on the turn knob, if it stops, that side is leaking. Watch the first 12 seconds on the video. I missed it too, a commenter reminded me just last week. : D

[@Phoneladie]

Jim, your video is so helpful but you kept putting the valve stem component backwards in on each faucet. I watcher the video again and again when you removed the stem component. I'll take a picture when I do mine so I'll put everything back correctly. Great video!

[@JimVincitore]

You're welcome!

[@rosagomez1429]

Help us, but will be nice to keep all the area clean and nice for a video.

[@JimVincitore]

Hi Rosa! You're welcome! Thanks for watching! Jim

[@АшотГогавич]

*Works great, comfortable too*

[@JimVincitore]

Great to hear!

[@snowblind5151]

Thanks for the video, but when you fixed the direction of the on/ off , the camera was not on the way you spun it .Was it a half turn or full turn ?I am asking because the first one went fine ,now this one has been in and out 3 times and i am afraid of ruining the o ring. No directions.

[@kathiechrisco442]

Camera work frustrating at times but all in all great info.

[@bacalao954]

Seems like you had a lot of fun with that project. It's nice to be retire. I laughed when you said," we'll do the other side tomorrow. I do the same with my projects. LOL

[@haveswordwilltravel]

This was insightful. Thank you.

[@tobymarley1]

You guys are adorable.

[@JimVincitore]

Hi OmfgMy! Thank you! I think we replace those parts ever few years! Thanks for watching! Jim

[@E7milehustla313]

Thanks Guy's good helpful video

[@aboveusall22]

Thanks I just fixed mine.

[@JimVincitore]

Cool! Wild how easy it is. Salesman at Lowes told me a few years ago the companies make them now so regular people can fix them without a plumber.

[@capsrawesome0108]

Thank You Jim! I Appreciate Your Video.. Gonna try it!😚

[@jorgesanz2687]

Thanks Jim! Very helpful!

[@JimVincitore]

Hi Jorge! You're welcome! I think we replace it every couple of years. Thanks for watching! Jim

[@metalmaidenhell138]

I miss my Dad teaching me things. We never read instructions either 😢

[@vincentloretta8939]

There so cheap you might as well change them . Next time take note how it came out and put it back the same way you took it out(plumber for forty years) .. you did an ok job and probably saved yourself a couple hundred

[@sandman9128]

@Jim Vincitore I can't find the type of cartridge that my bathroom sink takes! I can't find it anywhere online! My sink looks just like the one you showed in this video! Except its an old Elkay sink instead of Delta! And the cartridge looks completely different! If you or anybody you know could help me out I would appreciate it! My faucet has been leaking for months and its raising our water bill and it KEEPS RISING!

[@JimVincitore]

If you haven't already, call Elkay. Elkay USA/Canada Customer Care www.elkay.com/us/en/contact-us.html Phone: [phone]

[@JimVincitore]

Lowes has a generic brand of insert that fits many different manufactures.

[@JimVincitore]

Replacing the washer inside might stop the leak. One fella commented all I had to do was to replace the washer.

[@JimVincitore]

Sometimes it's better to replace the whole thing. Manufactures make all the connections screw on compression things these days so home owners can do it. I had a handyman replace my basement facet a few weeks ago, he only charged me $50.00, I bought the faucet at Lowes. Delta Foundations Chrome www.lowes.com/pd/Delta-Foundations-Chrome-2-handle-4-in-Centerset-WaterSense-Bathroom-Sink-Faucet-with-Drain/1000042165

[@sandman9128]

Thank you lots!

[@Mark-bi4ne]

The spring and grommet set I bought from ace had springs same diameter on either end. Definitely created a problem.

[@JimVincitore]

Hi Mark! Yep. I put new ones in a few days ago too, they were a tight fit too. They worked good. It was not the Delta brand, they did not have those in stock.

[@Mark-bi4ne]

@@JimVincitore I had to go back and get the correct tapered ones. It took over an hour to get the incorrect one removed because it was stuck.

[@hdm6897]

Replace spring and washer ,but also have a pair of nail clippers in your tool box

[@JimVincitore]

Hi HM! Took me a while, but I got it! LOL! play classical guitar, that's why I have long fingers nails! Thanks for watching! Jim

[@hdm6897]

Love your videos jim

[@josephscally6270]

For me, the white part would not budge when I tried to pull it up and out.

[@JimVincitore]

Did you get it out? Was it all busted up?

[@josephscally6270]

@@JimVincitore I don't know yet. I called in a plumber and we have decided to replace the whole unit with something more modern.

[@danaboehm552]

take a picture before you take every thing apart, so you'll see how it goes back in

[@amcqueenboxing]

I have always wondered why philips... Why not star head?

[@JimVincitore]

Tat was a guess! LOL! I looked it up though, it was Mr Phillips!

[@JimVincitore]

There is a star bolts, lots are starting to use those instead of phillips.

[@usukamee7301]

Pure torture. ...and could you please make this video an extra 60 minutes longet please

[@JimVincitore]

I HEAR YA! IT NEED TO BE MORE DETAILED! I'LL DO THAT THE NEXT TIME I DO A REPLACEMENT.

[@LGAussie]

I’m waiting for my cartridge to come in the mail. If Delta doesn’t ad the washer and spring, I will switch back to Moen from now on cause they provide the little extras, cause what a headache that would be if it still leagues cause u didn’t have a new washer.

[@katielyb]

I think they sell the spring and grommet separately so that you can just those as replacements instead of the part you purchased. I do agree though, however, that those parts should be included or they should offer one with and one without so one could choose to buy the part either way.

[@JimVincitore]

Thank you! You're welcome! Thanks for watching! Jim

[@charleneharris3819]

Thank you! Very helpful!

[@JimVincitore]

Hi Charlene! You're welcome! Thanks for watching! Jim

[@seller559]

Thanks

[@JimVincitore]

Welcome!

[@fabianrichburgh6517]

You the real MVP

[@laurieholmquest4894]

I can't get the faucet back together if I put the spring and rubber ring in???????? Why???

[@JimVincitore]

Did you get it working? Spring might be upside down, or there might be some chucks of rubber left over from the old washer.

[@patriciamiller9759]

Love your video, thank you! I think I can do this

[@Kcherry31]

Very informative

[@NoobGamer-jw6uy]

precise show, thanks a lot !

[@darrelldaniels9436]

How do you fix if one tap is on the other leaks and vice...

[@JimVincitore]

Hi Darrell! I'm not sure what you mean. But replacing the big insert, and the spring and black rubber washer, should fix all the leaks. That's the only parts inside mine. You don't have to fix both sides, you only need to fix the side that leaks. I usually go to Lowes/Home Depot and other hardware stores and talk to the plumber. You might have to ask around to find the plumber. He is usually an older retired plumber fella who is now working at Lowes. If you can, take a picture of your faucet and show it to him, they might be able to figure out the brand, like Delta, Pella, etc. If it's a faucet that has a DIVERTER, check out the videos I did on that, I posted those just a month ago, may 2019. Thanks for watching! Jim

[@evanjones7904]

does this work in mobil homes

[@JimVincitore]

Hi Evan! I'm don't know about that stuff. I think I watched a KZbin RV'er a few months ago put a regular shower facet in his RV. Something like that. I look for the video and link it below. Thanks for watching! Jim

[@JimVincitore]

Faucet Replacement, Fridge Update, & Kayaking kzbin.info/www/bejne/pWiXcmp-e8yXfsU

[@katielyb]

Standard rule for any project is that you pay attention to what position part was in during removal process. But, I think not doing so is a mistake we all tend to make frequently.

[@JimVincitore]

Thank you! You're welcome! Thanks for watching! Jim

[@CryptoManiac1776]

Make sure to leave the tools in the sink when testing to see if it works 😂

[@carlossanchez3000]

Thanks, VERY helpful!!!!

[@katielyb]

If the faucet was off when you removed the handle then I'd assume you'd place the part in in the off position. And of course vice versa

[@JimVincitore]

Thank you! You're welcome! Thanks for watching! Jim

[@sarahjane2647]

sweetheart lets fix that cut off valve while we're at it.

[@wildasweed5246]

Thank You

[@JimVincitore]

Thank you! You're welcome! Thanks for watching! Jim

[@JimVincitore]

Sink Faucet Repair, Delta Bathroom Sink Drips

[@dennisg.582]

Thanks, Jim. I think I'll by the generic brand so I don't have to replace the spring and washer seperately

[@albaniantexan8621]

I bought the first thing whatever you call $15 and did not fix the problem, got so mad, i hate when i cant fix things, then went back and bought the spring and the rubber for $5 was it worked perfect....so the first purchase was not needed! Got mad with my wife because i could not fix it, time to make up

[@imnguyen6658]

Thank you!

[@philz5620]

I was getting motion sickness with camera motion when first faucet was repaired & missed seeing important parts when camera moved off area of interest!! Camera handling was better on second faucet repair.

[@iadorenewyork1]

Please identify things, rather than just say "old one" and "new one". It makes it easier when I am in the hardware store, purchasing things, to know the correct name!

[@JimVincitore]

Hi Sally! Great point! I hear ya! I'm not a plumber, I think they are called rubber washers, springs, and inserts. But I'm guessing! Jim

[@jeffmonroe6317]

This lady was picky. I cant stand when somebody watches me work.ti be honest, I dont even like helpers.

[@holyworrier]

Jesus H. Christ.

[@rosessewingadventures4091]

Yes Rap! I am! LOL!

[@JimVincitore]

LOL! Cheaper than a whole new facet!

[@2asianguys667]

Thank you!!!

[@stephenlutchman2101]

THANKS

[@JimVincitore]

Welcome!