Sinolyn Bi-Xenon Projector Fog Lamp H11 On My Dmax Vcross

[@khairiahmad4764]

saya pn dah beli n pasang lampu ni, tp saya perasan sportlight ni macam LHD(Left Hand Drive), bukan RHD (Right hand Drive). kerana cahaya dia senget banyak ke sebelah kanan dan bukan kiri seperti sepatutnya, cutting line dia menaik dari kiri lebih rendah ke kanan lebih tinggi

[@geochannel85]

Tempat saya ni pancaran nampak sama rata - tiada tinggi/rendah dari kiri ke kanan. Adakah mungkin tuan terima versi lain. Dalam spesifikasi kedai pun tidak menyatakan antara LHD/RHD.

[@francislee8515]

Hi, I need to replace the fog light bulb as well? Or the projector come with bulb?

[@geochannel85]

The original fog light is using 9005 bulb type. The projector are using H11 bulb type. It doesn't come with a bulb, need to buy H11 bulb. Then, required to buy a pair of 9005 male to H11 female wiring harness.

[@kelvinchong4681]

If my car fog lamp is using H11 LED bulb, can this H11 LED bulb fit into the Projector?

[@geochannel85]

Yes it can fit original h11 bulb. I also use the original H11 halogen bulb to this projector.

[@kelvinchong4681]

@@geochannel85 The product name mentioned “HID”. Hence, I would like clarify if it’s able to fit LED bulb instead of HID.

[@geochannel85]

I have never used HID bulb. Maybe the HID also has same leg with H11 bulb.

[@kelvinchong4681]

@@geochannel85 thanks 🙏🏻

[@oniesma]

Boss, wire solenoid fog lamp tu kalau saya connect sekali dengan wayar solenoid projector dari headlamp boleh ke? So, bila headlamp high beam, fog lamp pun akan ikut high beam kan. Itu dari pemahaman saya. Boleh ke connect macam tu? mintak pencerahan boss.

[@geochannel85]

Klu pemahaman sy pn begitu boss.. Boleh tu, sbp tuk function hi beam - x guna banyak power, dia cuma akan buka cover dlm foglamp tu shj. Wire + terus shj ke body, merah tu shj ke headlamp high beam tu.

[@oniesma]

@@geochannel85 terima kasih bro atas pencerahan. Sy akan cuba👍🏻

[@inyo8924]

Itu pakai bulb h11 55watt ?

[@geochannel85]

Ya projector ni pakai H11 55W. Tu la perlu beli converter harness 9006 - H11.

[@cyryljonrebosura7143]

Hi, sir is is this plug and play? No need relay?

[@geochannel85]

Hi. Surely need relay. But I'm re-use the fog lamp original wiring to connect to the projector lamp. But not actually plug & play, need to buy convertor frm 9006 to H11 because the projector bulb type is H11 type.

[@FredleeIriD]

Boss..boleh masuk HID/LED bulb ka ni?

[@geochannel85]

LED Boleh, tp HID x tau lg - Sy x pernah pegang lg bulb HID tu. Asalnya sy mau pasang LED juga, tp sini selalu redah banjir,takut rosak kipas LED tu. Planning mau tukar kpd Osram Fog Breaker shj nti.

[@faizfauzi6500]

msti bole boss janji hid tu h1

[@Skull0023]

Hi sir where did you tap the hi low function?

[@geochannel85]

Hi.. Im using additional switch for high beam function. But U can also connect the +ve wire to the main high beam lamp.

[@nitijyo_heisei]

日常にある風景like1

[@geochannel85]

Thank you.

[@nasifracman6]

Boss pwd pa upload paanu e tap sa headlight highbeam. Dami nmen di napagana yong highbeam function ksi di kme marunong mag wiring. Wla rin ksi ako nkita na guide dto sana mavlog mo boss

[@geochannel85]

Sorry boss, I can't show you how to wire it right now. I try to explain here. There are 2 small red and black wires for the high beam function. Connect the black wire to the car body (make sure the body is metal and can conduct current). While the red wire can be connected directly to the "+" wire of the original big lamp. Then the high beam of this projector will light up together with the original high beam.

[@nasifracman6]

@@geochannel85 thanks po

[@nathaliemeigandah5717]

Hi where did you top the highbeam

[@geochannel85]

Sorry, I don't plan to install the high beam function on these fog lights. Anyway, I'll try to install it and show you the results later.

[@nathaliemeigandah5717]

Thanks hope to see what will be the output and wiring diagram

[@blackriderph4340]

@@geochannel85hello sir do you have a guide on how to tap to highbeam of headlight?

[@sharkzky4866]

San mu nabili projector light mu sir

[@geochannel85]

Frm Shopee - shope.ee/8zhnwwbgED

[@arvinpaunil7265]

sir anong brand ng LED bulb gamit mo

[@geochannel85]

Hindi ako gumagamit ng led bulbs. normal na bulb philips halogen bulb.

[@arvinpaunil7265]

@@geochannel85ilang watts yong bulb sir? Philips Halogen din kasi yong fog ko pero 35watts lang. Hindi kasing liwanag nyang sayo. Same sinolyn 3" din projector ko.