Lowering Kit for Vespa Primavera/Sprint 125 -150ccm 🛵

If the rear suspension of a scooter is lowered the seating height can also be reduced by a few centimetres. Diminutive riders can especially benefit from this possibility, eliminating any problems with vehicle stability while waiting at the lights or parking.
Shoplink:
www.sip-scoote...
The SIP rear suspension lowering kit sinks the seating height by about two centimetres, from an original 850mm to a more acceptable 830mm. In the end it is essential that the rider retains full control of their scooter at all times while riding and this is only possible if both of their feet can reach the roads surface while seated!
This kits installation is fairly simple and can be carried out by anyone who knows how to swing a spanner, or your local scooter workshop.
🛵 Seating height lowered to 830mm (original 850mm).
🛵 Scooters rear sinks two centimetres
🛵 Assures maximum stability and traffic safety.
🛵 The rear shock absorber retains its full working distance.
🛵 An easily realisable, efficient and economic solution.
🛵 Fitted in a matter of minutes.
🛵 MOT approved.
Please "LIKE" this video, subscribe to our channel, activate the bell, share it and ask any questions in the comment!

[@razeltv4106]

hello! Can you help me if my VESPA LX-FL can use this lowering kit?I'm 4'11 althou I shave the Sit but still I"m tip toe and hard dealing maneuvering my vespa

[@sanborn1968]

Fitting to a 2021 Primavera 125 iget model, is a spacer also required to prevent the body or exhaust muffler rubbing & making contact ?

[@Urwespa]

Gibt es auch einen kürzeren Dämpfer für Vorne, so wie Früher mal für die PX ?

[@stevev.gt8632]

Passt die Hecktieferlegung auch bei der 50ccm Sprint?

[@Luis-jg3cg]

does this work on the primavera 2022?

[@caldillus]

Vespa LX compatible?

[@aziessetiawan4829]

Bisa untuk s125??

[@Peladinho1984]

we need that for the LX owners, please

[@davidnewbrook8628]

Would this work on an Elettrica ?

[@SIPScootershopTV]

We will check it and let you know asap.

[@SIPScootershopTV]

Yes.

[@BrindiSea]

is there one for the GTS?

[@SIPScootershopTV]

For now, it's just for the Sprint / Primavera. Maybe we should think about one for the GTS as well. Someone else would like it?

[@BrindiSea]

@@SIPScootershopTV I would!

[@jaimecollard1288]

I understand you’ll also need to adjust the shock so it does not hit the frame. Is that right?