PART# 667872LOW www.scooterwest.com www.scooterwest.com/rear-shoc... Lowering a Vespa Primavera/Sprint & Liberty 150 iGet Lower your seat height by 1 inch (25mm) on a Sprint or Primavera 125 or 150.
Пікірлер: 62
@lizstrangesavage7948 Жыл бұрын
Knew I"d find this on your channel. Thank you, Robot! Now I know what to specify. I'm definitely vertically challenged on the Vespa Sprint 150 I just bought. Right now, I just lean it slightly to the right when I stop and have bought some heeled motorcycle boots. But this will make a huge difference.
@alexitosonixx87373 жыл бұрын
Thank you very useful lesson
@stigpiaggio3v7753 жыл бұрын
You're 5'-6.5".....perfect scooter height! I'm 6'-3.5", and doing OK on my Liberty150iABS 3-V i-get!
@NoFrictionZone4 жыл бұрын
I'm 5'11'' so it doesn't apply, but you are just a master at these things. Thank you! Since I think you follow Soccer YNWA :)
@VespaMotorsport4 жыл бұрын
Happy to help!
@garya30564 жыл бұрын
Good vid, Robot! Do you have something similar for a 2014 GTV300ie? Thx!
@alexandreuh28714 жыл бұрын
Do you have a table setting or something like this, to preload the rear shock absorber according to the weight of the pilot? (on primavera 2019)
@anandyahamdi3 жыл бұрын
Thanks for share. I was wondering what kind of spacer do you use? And how tall is the spacer? I'm not mechanic btw, only a regular rider.
@arturasminkelis32414 жыл бұрын
Hello there!! I really enjoy watching your videos and your professional work and these piaggio scooters! But maybe you could recommend a KZbinr who's fixing honda scooters?? Thx!!
@angelaalonzo-zaiontz23643 жыл бұрын
Hi Robot, Im a first time Vespa owner and definitely need this mod for my 2021 Primavera 150. Will this mod work for this years model as well? If so, I'll buy the kit asap! Thank you. :)
@christosktm56243 жыл бұрын
Congratulations for your job and your videos!!! I have piaggio liberty 150 i-get 2017 model,do you know how much must be valve clearances? Thanks a lot
@c7uk4 жыл бұрын
I’m 6ft/184cm but find my GTS a little on the tall side when stationary, especially compared to my PX - any modification available?
@paosatube3 жыл бұрын
How was the lowering bracket installed? This vid pretty much explained about the travel of the shock
@brentbutikofer90554 жыл бұрын
Does this work with a GTS?
@jeromenicolas89824 жыл бұрын
Hi Robot! Will it affect the height of the front shocks?
@Paullebbon Жыл бұрын
Hi Robot, will this bracket also fit the Vespa LX 150ie version? I have to lean the bike and put one foot down when I stop and in busy traffic I find it difficult. Thanks in advance.
@arcadia56072 жыл бұрын
Do you have the lowering brackets for the MP3 500 2016?
@dean3434 Жыл бұрын
Thanks much for informative video on seat height. I'm a male at 5'5" and I'm riding a 2016 Sym HD 200 (171cc) and it has a 31" (+) seat height. After a number of tip overs at a few stops (how embarrassing!) with very minor damage, I have learned how to simply slide forward and down on the seat at every stop and be sure to focus, focus straight ahead. That mental focus works and no tip-overs for a long time now. Question: Do you happen to know of reducing brackets for my 2016 Sym HD 200? A universal set of brackets? I have two shocks. Or just have the seat shaved by a pro. Thanks for your informative videos! Dean Seattle Forgot to ask if you have a pair of recucers for my Sym 200?
@axel95462 жыл бұрын
would it be possible to lower a 2009 piaggio liberty 125 scooter?
@anandyahamdi3 жыл бұрын
I was wondering what's the inner anad outer diameter of the nylon washer. I'll try to find here in my country since it's too far to order from US.
@alrickdy78664 жыл бұрын
Hi Robot!, what is the size of the spacer? thanks in advance!
@gijoyjoy4 жыл бұрын
Thanks Robot!!! I bought the gel seat that lowered it about 1/2”. Wish I knew about this bracket earlier. So if I don’t have an impact drill, would my regular drill work? How much is that bracket?
@dwikaswandana21384 жыл бұрын
Hi
@MarceloISB4 жыл бұрын
Is there a similar solution for a gts300?
@coastalhillbilly3419 Жыл бұрын
Anyone know if it’s necessary to use the shock limiter spacers for the 2018 Primavera with 11” wheels when installing this bracket?
@archjm4 жыл бұрын
Was the spacer included in the installation?
@deesnuts86624 жыл бұрын
i’m 5’2 i need this
@victorlandau37424 жыл бұрын
Hi Robot, picked up the lowering kit from you folks for my 2020 Liberty 150. In looking at the location of the muffler on the Liberty vs. the Vespa, I don’t believe there is a need to put the limiting washers on the shock. Your thoughts? Love your videos and reviews, will come and visit next time on the west coast. NH is home.
@VespaMotorsport4 жыл бұрын
The liberty has a lot more room between the exhaust and body work, so you should be fine without the washers. Come on down when you're out here! Thanks for the support.
@rulynsantiago16723 жыл бұрын
How about vespa s 125 iget 2020 lowering?
@davegeirman5239 Жыл бұрын
I've purchased this bracket from you and having it installed by Coast Riders Powersports in San Luis Obispo - an authorized Vespa dealer. They have not installed one before but I feel that they can do so very easily. How long would you think it would take a good mechanic to complete the install? Thanks
@OuyEbuts Жыл бұрын
Does the ride become more stiff?
@rulynsantiago16723 жыл бұрын
Hi robot!posible for vespa s 125 2020? And how many inches drop? Thanks..
@mikerelo6326 Жыл бұрын
Does the shock positioning adjustment also affects the height
@weimen19772 жыл бұрын
Hello ! I just got my Vespa Lx fL 125 cc . Can I also lower it? I’m 4”11
@paulfalt50843 жыл бұрын
Does it work on primivera lx 125 from 2010?/
@Hemantshorts123742 жыл бұрын
Hi there Do you have any bracket for GTS 300 2022 model? How can we we buy a one from UK.. Regards Ravi
@tonilauda4 жыл бұрын
It is safe for the exhaust? Because the gap between the body and exhaust is so close
@VespaMotorsport4 жыл бұрын
We explain this in the video. Thanks!
@davidjones5354 жыл бұрын
O.K. how about raising it I'm 6'1" ?
@JenniferPavlik Жыл бұрын
Can you lower a vespa GTS 300? I am five foot and struggling to find anything!
@tenzichoeyin11882 жыл бұрын
Will this work on et4?
@davidgutholm1612 жыл бұрын
Is there a way to lower a 2020 vespa 50 cc
@dio563013 жыл бұрын
Is there a way of increasing the height of the seat? So not the whole Vespa, just the seat... I'd like to get some more height for my legs when on the vespa... Or perhaps a seat without the 'sitting' bump so at least the whole seat is as high as the rear part of the seat? I'm about 6'1 and on long rides it's just way too low unfortunately. I've had a look around but can't really find any seat that is like that... even the 'mono' seat has a bump and with that one you can't even sit on the rear end. I was also under the impression that the GTS seat felt higher than the Sprint/Primavera one (though officially listed the same height)
@VespaMotorsport3 жыл бұрын
Nothing like that from the factory. We've had good luck in the past taking our seats to an upholstery shop to have them lowered, but the opposite may be possible as well. Have them use your stock seat pad and do something custom?
@dio563013 жыл бұрын
Thanks for the tip. I might have a look around for that. I already tried an airhawk... but it only raises it slightly and feels a bit too wobbly for me... so customizing the seat might be the only option.
@garya30564 жыл бұрын
Hi again, Robot. Hoping you see these messages here and can respond to my earlier question. Thx!
@robertboyer5498 Жыл бұрын
What solution is available for the 50? My wife needs it, lol
@CarlosJMunoz3 ай бұрын
I need the opposite of this? Is there a way???
@restiecalingasan495 Жыл бұрын
Great
@whitehat10824 жыл бұрын
nice share robot
@AdaLubell4 жыл бұрын
is there any way to lowering a medley 150? i'm 5'5 T_T
@garya30564 жыл бұрын
Hi Robot- pls see my question from a few days ago. Thx!
@caleballison95813 жыл бұрын
Does this also work on the 50?
@VespaMotorsport3 жыл бұрын
Will not work on the 50, sorry.
@danalopez51652 жыл бұрын
Hi Rob, I just purchased a 2007 vespa lx 150, and it's a bit to tall to comfortable stop. Would this work on my older model? I'd really appreciate a response on this! I cant seem to get a clear answer
@loupasquesi74162 жыл бұрын
Robot is the best.
@earlybird19693 жыл бұрын
Hey robot I wanna see you riding a primavera the one that’s not lowered I wanna see your feet on the ground
@davidcharnes9161 Жыл бұрын
I suppose an experienced mechanic doesn’t need to use a torque wrench.
@agusjokosusilo65072 жыл бұрын
Gak bisa enggrees
@garya30564 жыл бұрын
Robot- I’m beginning to wonder why you can’t answer a question here that would lead to business for your company. I mean there’s only 15 comments here and I’m 4 of them for crying out loud. This is the 4th and last time.
@VespaMotorsport4 жыл бұрын
Give us a call, we're happy to help you over the phone. 619-280-1718. Thanks!