Whelen Pioneer LED 4 Channel Flasher

[@anthonymassara4288]

can this be used with a dual colored light head, but still have independent control of the color?

[@randygreen007]

Is there any chance the fps rate hits 40hz on any of your patterns?

[@SIRENNET]

Not that we're aware of. Thank you for watching :)

[@connorjoslyn8445]

How would you change the flash pattern once install. Once you get it set of the strobe pattern. Will is stay on that pattern so all you have to do is flip the flash switch and it will begins to strobe

[@SIRENNET]

You can set the pattern prior to mounting the PFLASH module. It has a post that when +12volts is momentarily applied, the flash pattern advances to the next. You would need to access this post or you could run a wire to a momentary switch in the vehicle so you can easily change patterns on the fly.

[@CHANNELCHECKER381]

Do you have a flash controller that would give the same flash pattern like the Whelen Liberty SX light bar? I am making my own LED light stick and really like the flash pattern of the Liberty SX light bar.

[@billmorganmoo1481]

will this work with a pair of whelen 500 steady burn led lightt heads?

[@SIRENNET]

Shouldn't be a problem.

[@robg7399]

Would this flasher work with Rigid or Baja Designs led off road lights? Thanks

[@SIRENNET]

It should work fine. Keep in mind the draw the inputs are rated to handle and add relays if necessary.

[@alexlindsay724]

Nice video

[@19DUNIT]

Would this work with a 20" Rigid Industries LED light bar?

[@SIRENNET]

So long as the draw doesn't exceed 5 amps, the PFLASH can be used along with the 20" bar.

[@dasarge84]

@@SIRENNET sounds like this module to drive other lights like hella 500s and other driving lights by using it to drive the relays that run the lights so its pretty much a relay driver

[@jamesgreen3574]

is it possible to install this unit in the engine bay? thanks james.

[@SIRENNET]

The PFLASH can be mounted within the engine bay. You'll want to make sure it's away from water and excessive heat. Be sure to secure the wiring connected to it as well so that nothing becomes loose or gets moisture within it.