Tire Sidewall Repair Permanent Vulcanizing PRO REPAIR

[@coolerideas2661]

For guys like me who just love learning how to fix stuff, one of the best channels on KZbin. Never a bad video. Mad respect for this man.

[@sixtyfiveford]

Hey Thanks.

[@HumanHunterzz]

This guy has singlehandedly changed my view on working on my own stuff!! Great work!

[@sixtyfiveford]

Great to hear!

[@V8SKULLS]

Brother you are such a Gem on KZbin, just a wealth of knowledge, I really appreciate your knowhow and sharing it with us all, You are Never to Old to Learn Anything. God Bless you and sweet Ginger❤

[@sixtyfiveford]

Hey Thanks.

[@jjock3239]

Excellent instructional video, as usual. As a kid in the 50s, I remember a tire shop, a few blocks from where I lived, did every kind of tire you could imagine, including repairing side walls. I don't remember them sewing the repair, but that is a long time ago. They used to buy the raw rubber in large rolls, and they were heavy!

[@alancummings5008]

Back in the 70’s, I worked in a farm machinery dealer shop. We had vulcanizing pads that we would repair tractor tires with. You lay them over a patch that was similar to a tire boot. We would soak the heating pad with lighter fluid and light them with a match. It would burn out in 30-40 seconds. You remove it from the tire and you have a perfect patch. Your video brought that repair to mind.

[@sixtyfiveford]

Interesting!

[@redpost2380]

You are on the money. Many western videos show vulcanising for one or two hours when the old patches burnt for a couple of minutes and worked perfectly well. I guess most of those patches were used for inner tubes which are thin.

[@Rein_Ciarfella]

That outro was priceless! Mini Baby Sasquatch trying to poke a hole with the wrong end of the pike! Then spliced into the same sequence Ginger going through, on the scent. Looks like you’re having way too much fun in editing! 😂👍

[@matthewpeterson3329]

This was a terrific video. I work on a military base as a contractor, and some of our heavy equipment have tires that are very expensive, and we get shrapnel punctures daily. I am all over this technique. Thanks for the clinic!!!

[@jvin248]

I like how you reference "if you've seen in 3rd world repair videos". I've seen those, they are clever, as is this video. Instead of the wheel roller, you can just use the edge of a soup can and roll the edge back and forth while putting pressure. Olden days (1970s) tire tube patch kits were sturdy cardboard with metal bottom and metal screw on cap and you'd roll the hard bottom rim of that kit back and forth to grind in the pressure.

[@ericvaughn1126]

Agreed! I rolled plenty of bike tubes in the 70s. 👍👍

[@Rein_Ciarfella]

And the lid was serrated to use to rough up the tube surface!

[@ericvaughn1126]

@@Rein_Ciarfella It most certainly was!

[@yodasbff3395]

You do good work. Most people are too lazy to put in the effort that you put into a repair. I like that fix things rather than throwing stuff away. The look on Ginger's face was precious 😍.

[@sixtyfiveford]

Thanks. It's funny that Ginger gives me the utmost attention when I start talking to her. Has no idea what I'm saying but, acts like it... What a good sport!.

[@yodasbff3395]

​@sixtyfiveford Ginger is a keeper, she always makes me smile.😂

[@charliemason4355]

@@sixtyfiveford That's just more evidence supporting my contention that when they say dog is man's best friend they mean men not mankind. Why? Because when a man speaks, a dog is the only creature that looks at him as if he is saying the most amazing things.

[@ericvaughn1126]

You proved how much this process has saved you by showing ONE tire and track repair at the end. That's $ in the bank all day long man! 👍👍

[@Rein_Ciarfella]

Another viewer here who never realized this was a thing! This is giving me ideas for all sorts of other applications not connected with tires or tracks.

[@howder1951]

Great video, like you said there are a million repairs done in this fashion in the world where labor is cheap and parts are expensive or non-existent . Enjoyed very much . Congratulations on the subs, life is good.

[@wyattoneable]

Exceptionally well explained video. My brother moved to the Philippines and in just the few short months he's been driving there has has 6 to 8 repairs completed. Like you mentioned, the labor is so cheap that the repairs make sense.

[@sixtyfiveford]

I actually had quite a bit of help learning this from people from the Philippines. One guy in particular runs a shop down there. I bent his ear more than he wanted to teach me.

[@wyattoneable]

@@sixtyfiveford It's a small world.

[@Krankie_V]

My god, this guy can fix literally anything. I never would have attempted this had I not seen this video, but after... I'd consider trying it for sure

[@sixtyfiveford]

Hey Thanks.

[@20havenfun08]

Thank you, enjoyed... I remember the old burn on patches...

[@tsl7881]

Dad still has the old clamp we used to fix flats with on the farm, but no sulfur pads or patches.

[@nallen794]

wow, I have installed a lot of tire plugs and patches but this is a whole different level of repair, i'm impressed

[@sixtyfiveford]

Hey thanks

[@09FLTRMM77]

MM77 Approved 👍🏼 👍🏼…………………………………………………………………..The commercial before the “ Ginger Show “ is getting ssssooooooo long!! LOL 😆

[@Rein_Ciarfella]

For anyone who’s interested, I recently purchased a similar bead breaker off Amazon for $36 and used it successfully on a large zero turn tire. It’s pretty heavy but built really well.

[@jovanemontes80]

Got a link for it?

[@pine6163]

As inflation continues out of control , your videos are more relevant every day👍 vote accordingly …tis the season🇺🇸

[@saponi2]

I have a tractor tire that's been waiting for this video. Thanks

[@mjktrash]

I'm baffled by the number of times you've poked holes in your sidewalls! ; )

[@sixtyfiveford]

@@mjktrash Narrow gullies/canyons with sharp granite boulders on each side. Generally, they're V'd out as well for water to run down the middle, so you're really only running on the outside edges of your tires.

[@philly12887]

The older I get the less I want to buy new things, and rather fix the old stuff. Thanks for your videos.

[@gutsngorrrr]

Fantastic repair. If I was doing a lot of off-roading, I would certainly invest in one of these vulcanising units, as it really is a money saver. Thanks for sharing

[@psilocin6739]

Thanks for sharing your knowledge with us. You're damn near a genius.

[@glenns5627]

Mostly when he stands near Ginger ... 😆 JK! I'd kill to have Mo as a neighbor, most clever repair guy I've ever seen.

[@fastacker2]

You must have lived several lifetimes before this one to learn all this stuff. You never cease to amaze! Have you considered adding a tiny bit of elemental sulfur powder before the heat treatment? Supposedly, that is how they do the original "Vulcanizing". The Sulfur forms crosslinks between the rubber polymer molecules. Nut sure if it would help on a repair or not.

[@sixtyfiveford]

The cushion gum already has that in it. The sulfur was added when they were using rubber straight from the tree.

[@flatlinesup]

That Sasquatch hunt at the end... LOLZ!!! Thank you (as always) for sharing!

[@sixtyfiveford]

Glad you enjoyed it

[@_RocketRooster]

Never knew this was even a thing. Great video!

[@DusterNutbar]

This man is a genius

[@wildwestexplorations8097]

Awesome video it’s awesome to see this art of tire repair is not lost completely I used to do this in the 80s and 90s when I worked at a tire shop but it soon disappeared because of like you said the labor cost its funny know you take a tire in to get it fixed a lot of big box stores won’t fix the tire if there is a nail with in a inch of the side wall it’s just pathetic

[@Mikefngarage]

thanks again Moe for saving people lots of money. I never knew they could be patched.

[@timmojo]

As a parachute packer…a surgeons knot with locking knots on the running ends. It’s nylon so it’s slick. Good job thanks for sharing

[@redpost2380]

You should be on TV not Utube. A 27 minute video worth watching every second! You nailed the problem: our standard of living is too high and China can make mew tyres for 15 minutes of your labour time. However when you start looking at large tractor and backhoe tyres, the economies of scale may well be there for one to fix rather than replace the tyre.

[@goodfortune6399]

About 1983 I saved up and bought a new set of eagle st for my 442 and immediately tore hole in my sidewall. None of big shops would touch it ,I found a old man tire shop and he vulcanized it for me. Kinda ugly but I never had a problem with it

[@lawerncemiller6557]

We use to have a tire shop in our town that made recap tires an also did vulcanizing repairs for off road tires then in the late 1960s vulcanizing repairs became illegal to do because of radial tires and people doing repairs on street legal tires the shop I spoke of repaired thousands of tires using the reinforced rubber never saw a failure of the repair

[@JDeWittDIY]

Haha, sasquatch cameo was great!

[@sixtyfiveford]

Hey thanks

[@transmitterguy478]

I did your other method, and while it wasn't leaking yet, my scissor lift had a slice on one tire. I sanded it and super glued a piece of rubber onto it, after gluing the slice back, and sanded it and it looks like your tire. Thanks!

[@sixtyfiveford]

Great job!

[@hosocat1410]

To get tire bead broken I've laid it on the driveway and then drive my pickup onto the tire. Works well.

[@charlesK001]

yes, the end skit was absolutely worth doing!

[@sixtyfiveford]

Hey Thanks.

[@mikespain8655]

Pakistan mechanic videos. I have watched many. Great repair.

[@JWoodcock]

Man thats great to know about making the vulcanizing glue yourself with the cushion gum. If I can remember to keep fresh gum in stock, that would work way better because I only patch stuff once a year or so.

[@minilathe5271]

Awesome content, never even knew about this being possible. Thanks for sharing your knowledge.

[@sixtyfiveford]

Glad you liked it!

[@michaelosmon]

This was a really cool repair. Thank you for sharing your skills knowledge and experience. I appreciate you. And Ginger

[@sixtyfiveford]

Hey thanks

[@transdetendal]

very informative vid , as always . i have been wanting to know about this type of repair before but as you mentioned , no one uses this in our parts of the world , im from denmark and kind of poor since everything over here cost arm and legs so its ggood to have knowledge of things all over , thanx a heep , and by the way ,i think your dog is friends with the sas!!

[@sixtyfiveford]

Thanks.

[@chrissscottt]

Very impressed. Love the sasquatch bit at the end.

[@sixtyfiveford]

Thanks

[@wilfredvanvalkenburgh2874]

I know a good dog when I see one, and that's a good dog!

[@ProlificInvention]

Awesome video, will definitely be using this method. Thanks man, as always

[@sixtyfiveford]

Thanks

[@jagtan13]

Normally wouldn't recommend tire protection plans, but we've had two go out in one year (one literally today), and it saved our butts. Latest one had the nail nice and crosswise into the sidewall.

[@sixtyfiveford]

It's a gamble and you won. To stay on top, never buy the warranty again as the odds are way against you. Worse odds than Vegas .

[@jagtan13]

@sixtyfiveford it was definitely a great roll ngl. And I grew up in the Philippines. Vulcanizing is a corner shop deal there, but thankyou for spreading the knowledge.

[@thomasguerra6718]

I used to vulcanize my bike tires and tubes as a kid starting at 6 years old. Grandpa showed me all the tricks.

[@glenns5627]

Mid-70's in a "real" gas station, very similar patching done. Against the instructions, on the advice of the older guys that worked there, we'd light the glue on fire after applying it. Dried the glue faster and warmed the rubber. Peel and lay on the patch, work it on good with the Stitching roller (looked similar to Mo's home-made thing) and charge them ... $3.50. You wouldn't believe the guys who complained about that after we went up from $2.50. I haven't seen a buffing wheel since then, and got all nostalgic when Mo opened with it.

[@Tubeagrutis]

Sooo cool, Moe! I have seen the vids of the third world folks doing these repairs, I had no idea that was a legit repair. No I know. /thanks for sharing your vast knowledge with us!

[@MalawisLilleKanal]

Nice video, and very cool ending.

[@georgesweap7]

As always, I enjoy your videos because they cover every day home garage shop repairs. Plus I really like Ginger who is such a cutie! Thanks Moe!

[@sixtyfiveford]

Thanks Man.

[@JOEZEP54]

Great repair. 👍 Stay well, Joe Z

[@sixtyfiveford]

Thanks 👍

[@JOEZEP54]

@@sixtyfiveford You're welcome

[@1waukesha]

Thats cool! Once Again, excellent information sir! I must say though, you are HARD on tires. I have done alot of off roading and 4 wheeling with quads etc , never Have I seen such tire carnage 🤪

[@MikeyMack303]

Great video! Thank you so much Moe, and Ginger!

[@littlepaddy7444]

Thanks for bringing this to us. This information is difficult to come by, as though it is suppressed. I will put it to good use.

[@scottcates]

Impressive demo

[@wesrurede]

Get yourself one of those carbon felt welding/plumbing torch blankets to store the heat in, use it to weld or torch too. I can arc weld over quite a few objects with a 6 millimeter thick blanket.

[@danielmcguire6675]

Pretty slick, nice job!

[@HFG]

That's pretty cool. I never knew about that stuff before. Nice.

[@sixtyfiveford]

Thanks.

[@richardclifton4120]

Obviously you and Ginger have an acquaintance with the tiny sasquatch who is messing with your tires at the end. She had no reaction to it other than a passing how-do-you-do. She was interested in getting back on the trail, and she knew what you were saying as she was so attentive to every word. Put her on a plane or send me a future puppy. She is one smart lady, and they are hard to find. I never thought I would be interested in something like this, but I think fixing tractor tires is not so far-fetched using this also. Many tractors get punctures from rocks and sticks. You are a farmer's friend when fixing things quickly is needed. If you want to get that harvest in and all the stores are closed but a punctured tire is all that stands between you and success, this is the way to go. Good Demonstration.

[@sixtyfiveford]

The hardest part is just taking the tractor tire off the rim.

[@backyardsounds]

Back in the day they used those a lot at roadside shops for tire repair. Not sure why they stopped doing that. I actually make casting molds (for pewter) from unvulcanized rubber. I have a large floor plate vulcanizer I use. You can't fix a tire with it but it's fun. I need a smaller one. It's for sale (cheap) to anyone that wants it. It weighs 500lbs though.

[@carbonstar9091]

My grandfather worked in a tire factory many decades ago and when I got one of his toolboxes after he passed every nook and cranny was full of carbon.

[@jerrywilder9403]

Really good job my friend 👍👍

[@Rein_Ciarfella]

I knew the word “vulcanized”. Saw it all the time for tire advertising back in the ’50’s onwards. I always thought it just meant heat - didn’t realize it also meant pressure. Kinda like rubber diamonds!

[@vennic]

Get a cheap needle driver or two and learn the simple interrupted instrument tie, it's a square knot. Super fast, used for 99% of superficial lacs. If there is lots of tension, you can wrap the first throw twice and cinch down on the "post" side of the thread to help hold in place until you get the next opposing one down to lock in the tension. This is much easier with threaded cord. Edit: You can also add in locking stitches, where each stitch is threaded under the loop of the preceding one on the surface of the work first, before pulling the throw tight. If only tying one knot this helps prevent catastrophic failure if that knot fails.

[@NicolasCirillo]

i was thinking instead of tin cans you could use silicon baking sheets.. its thinner more flexible and may let more heat permeate. thoughts? Fantastic info as always

[@Hotdaddy536]

I only come to see Ginger...and learn to fix a tire the right way..👍👍👍👍

[@carloskawasaki656]

Thank you for sharing, another great video, i learn a lot, you are a great teacher and your explanation are awesome 👍👍👍👍

[@sixtyfiveford]

Thank you!

[@MikeRoss-zv9nm]

Another great video. Keep them coming.

[@sixtyfiveford]

Thanks, will do!

[@tanksoldier9770]

Great fix Thanks TANK what about slashed truck tires if done properly ?

[@sixtyfiveford]

Yes and no. It would really depend on the severity and direction of cut. sub 1" and a repair would be successful. Over that and more cords have been cut and more reinforcements need to take place. Over 2-3" and a typical Radial tire is just too weak to start with to hold any repair.

[@Megellin]

Do that same knot but put the string through the loop on the square knot part 3 times. It's a popular knot for fishing I forgot the name, but it holds extremely hard and allows you to pull the knot in like you want.

[@jafinch78]

Excellent, counter landfill economy of wastoids, detailed instruction! Man, been waiting for a video like this. Seems like the earlier KZbin had a video or two of or maybe was like done when people traveling abroad and not specifically the more I think about. Yes, seems like I saw once or twice of people traveling abroad with their vehicles. Wondering if those teflon sandwich toaster bags would work as a resist layer as well or like oven non stick teflon pads? Man, if could somehow level unevenly worn tires like with the cross slide grinder method or other would be an interesting video. Anyways, keep it up. Thanks for sharing!

[@sixtyfiveford]

The aluminum sheet sticking really isn't a big deal, you just don't want to put the die directly on. I would think Teflon would stick about the same way where you would have to force it to come off as you're putting that clamp under probably 1000-2000 plus pounds of pressure.

[@EMNM22]

👍 Thumbs up for the sasquatch. I got a chuckle from it.

[@sixtyfiveford]

Thanks 👍

[@patrickday4206]

I did this on my semi truck been working well !! 😂😂😂😂

[@michaelbrinks8089]

Great Video 👍.....🤔 Maybe find some nylon screen made out of that same tire string material. Or maybe kevlar screen fabric would also work & sew into the hole.

[@Isaac-47517]

🙏

[@emeltea33]

For the Surgeon's knot, you'd need hemostats, colloquially known as a roach clip. Consider horizontal mattress, running and interrupted as search terms.

[@Asomesauc]

Another great video thank you for making it🙏🏻

[@sixtyfiveford]

Glad you enjoyed it!

[@danromeo6571]

We’ve made a huge mistake by being a throw away society. I’m with you it ain’t broke till I can’t fix it anymore.

[@bryanwiley7345]

Great repair video!!! Do you remember Hot Monkey patches? Those were the greatest.

[@sixtyfiveford]

I actually have some. They were the exact same principle. You have cushion gum and the little flammable disc in the metal pan that's supposed to be clamped down.

[@bryanwiley7345]

@@sixtyfiveford Righ on, used to use them to patch bicyle tire all the time.

[@1924ab]

That was a great video! Have you tried using a high temp silicone baking sheet instead of the sheet metal? Where do you buy that roll of rubber from?

[@MC-kt9ki]

Awesome .... Thank you so much for all youre geat Videos .Greetings from Germany ;-)

[@sixtyfiveford]

Danke

[@strategicthinker8899]

I just super glued a small cut (no missing rubber) in the sidewall. It's been holding alright. The main thing is for it not to spread.

[@Isaac-47517]

oohhh smart tires ... last long and prosper... emotionless...

[@djmips]

Would you attempt this with a road tire though...

[@ProleDaddy]

Goddamn Sasquatch 😂🤣 Have I said you're awesome lately? You're awesome, bro.

[@sixtyfiveford]

Thanks Man.

[@488ci]

Excellent 👍

[@wpkennels3555]

Love this video, gonna subscribe. When you said the aluminum sticks to the rubber, I was wondering if you had tried parchment paper? If you said what temperature the heating elements were, I missed it while writing this, lol

[@sixtyfiveford]

These heating elements turn off/on at 300F /150C. The aluminum sheets I use aren't that difficult to remove I just mention it because it's something to be mindful of vs accidentally applying the die directly to the tire(you can still pry those off, it's just difficult). You wouldn't want to introduce any wax or in the case of parchment paper, silicone into the molten rubber.

[@talon0863]

Thanks I like the outro!!

[@sixtyfiveford]

Thanks

[@frankalbergo8120]

Excellent, thanks Man.

[@sixtyfiveford]

You bet!

[@THEDRAGONBOOSTER8]

Very helpful ,thanks..

[@anthonyanderson5310]

Id kill for peak inside your toolbox and definitely more of your homemade tools

[@JackdeDuCoeur]

Super useful! Thanks

[@sixtyfiveford]

Thanks

[@DAS-Videos]

What in tarnation it's a Sasquatch! Pictures of them make them look a lot bigger.

[@sixtyfiveford]

Exactly. People are looking for something way larger. It's barely taller than a bush.

[@kurtandlazanneilander724]

I have several questions: 1) Tire places won't mess with sidewalls - is this just the labor cost, as you mentioned, or is there any safety concern. (That is, is a repair like this ok for highway speeds? 2) On that note, does the wheel have to be re-balanced after? 3) Your track repair near the end makes me wonder, could a person make their own tracks by cutting+stitiching existing (snowmobile, probably) tracks?

[@sixtyfiveford]

The first thing you have to realize is the entire automotive industry is run off of fear-mongering. Irrational mentions of doom and destruction, death and financial ruin; if you don't service, repair, refill, flush, or follow their guidelines to a T even if it doesn't coincide with what the manufacturer says. 1) First, nobody is trained to do it. Second, the process can take upwards of an hour of Hands-On time which is around $200 shop rate. Third, there's more money in fear-mongering and just telling somebody they need to buy a new $200 tire that only cost them $50. You know what if you're replacing one, you might as well replace all 4...... Safety concerns.... It really depends on the tire and the damage. A passenger car tire is paper thin and can barely hold its own weight to begin with. An LT truck tire is way more substantial and can take 10 times the abuse. A semi truck tire is nearly indestructible and could be repaired over and over. What I'm saying is there has to be common sense and a skill set already in place for these repairs to happen. Someone that knows what will work and what won't. Problem is all the guys that used to do this in the US haven't done this since the '80-90s and are all gone. 2) A tire needs to be rebalanced every 3,000 mi according to the superwise tire shops..... I promise they're not in business just to make money...... So would this need to be rebalanced, yes. 3) Absolutely. You would want to make your own custom jigs to be able to do a full track width at a time. This repair is done in the US for conveyor belts at rock, quarries etc. A track is essentially a conveyor belt with lugs.

[@kurtandlazanneilander724]

@@sixtyfiveford All of that is great info! Thank you so much for taking the time out to answer! (And also for making the video in the first place)

[@timothyleeuw5895]

@@sixtyfivefordthat is spot on man. I recall my first few days as a new mechanic at an auto shop. $7 rotors sold for $50. Tires marked up 50-70%. I was floored. This was back in the early 2000’s. Also young and stupid. Those few years in that shop taught me so many things.

[@Rein_Ciarfella]

I could already envision other uses for that bigass C-clamp!

[@simonilett998]

Looks like that Sasquatch is not only sneaky, but has also mastered invisibility. No wonder you, or Ginger (runs straight past him) can ever catch him in the act of spearing your tyres. Now he just needs to master the art of using the sharp end of the spear to make a neater gash that's easier to repair🤣🤣

[@sixtyfiveford]

Invisible to the naked eye and scent... That's how they've been so elusive.

[@everlast2658]

Thanks, great infomation

[@berniekelly4028]

I have been doing this repair on race tires , atv tires, skid steer tires since 2002. Latest price $50 a hole to repair. I have a clamp press aka a tire spotter from the 1940s.

[@Rein_Ciarfella]

Moe, it looked like you applied some layers without using the DIY adhesive. Does it matter?

[@sixtyfiveford]

You don't need the mixture between layers.

[@oscara.8176]

Thanks!