Old Man Repairing A Huge Old Tire Sidewall | Amazing Repairing of Monster Tire |

[@kellyward7090]

My hats off to all these folks working with almost nothing but basic tools in the dirt and doing incredible jobs. Impressive

[@aboveaero]

Doing jobs that shouldn’t be done. You should NEVER patch a hole in the sidewall of a tire

[@СергейКурбатов-ю7з]

@@aboveaero Согласен , работа НЕ надёжная , Временная !, ...Но на этом колесе , Владелец , заработает на Новое колесо !, 🇷🇺😁👍👏👋👣👣👣👣 , Привет от Российских зрителей !.Индийским работягам Респект !, 2024.06.03.

[@palemki]

Cuz you stupid thats it. IM SURE YOU WOULD LOVE IT in your car when your kids are inside right? cuz its so impresive..

[@ХрюньМоржов]

Я предлагаю тебе ездит на этой шине. Да и вообще, использовать только, что они сами сделали. Ты же понимаешь, что в шине есть рёбра жёсткости в виде железных прутьев? Да, он ее заклеил. И что потом? Это, как скотчем примотать турбину самолета к крылу. Держится вроде, попробуй полетай теперь. Кругом дураки такие сидят. На заводах по изготовлению шин тоже не идиоты. Не просто так ее делают с железом внутри! А еще, можно одноразовые шприцы мыть и еще раз колоть в людей. А че нет? Вроде выглядит чисто.

[@СергейКурбатов-ю7з]

@@ХрюньМоржов А что !?, мало временных ремонтов !?, в разном направлении ;, ...Вопрос !, на сколько качественно произведена работа !?, а что касается ваших сравнений с ( самолётами и т.д.) , так и самолёты с Завода выходят плохого качества !, и без вашего ( скотча ) !, ...и где ( Самолёт и где покрышка ) + ко всему , Зная о том - что резина после ремонта , Тракторист и Хозяин той техники , Они Оба будут контролировать ситуацию !, ...На транспорте , можно В Любой момент остановится и проверить ( состояние колеса ) , Нежели ( самолёта ) !, ..и прежде чем кого - либо !?, ...Назвать ( дураком ), ...задумайтесь над своим текстом , то что вы пишите и с чем сравниваете !?, ...если вы грамотный и в том числе взрослый человек !?.2024.06.12.

[@sinisterpink9907]

This man put more effort into this one tyre than I have in all my jobs throughout my working career

[@uuuultra]

that's why you're on youtube

[@twizzy585ots]

​@uuuultra and you're where 🤔

[@fived9424]

What kind of jobs have you been working??

[@Emperor_Shao_Kahn]

tell us ur a massive p u s s y without telling us ur a massive p u s s y

[@thatguy3213]

@@uuuultrai would bet this guy is a kid just based from the comment 💀

[@wildbill1313]

He’s not old he’s 26

[@greghimm2753]

And privileged 30 years old Westerners act like they are entitled spoiled 6 years old brats.

[@Anton43218]

26 but has been working night shift since he was 22

[@cybermasteriyaz8793]

What 😑

[@Thanan548]

Been working 68 hours a day since 12

[@airhardnationjackcooke961]

LET HIM COOK!!!

[@catman9778]

This is a Great Idea and skills Lost . This man is doing a great service for ones, that don't have a lot of money for a new tire. The Side wall's of these big tires do not have the Pressure that the Tread has. I have a large Tractor Tire with a tear this size, and plan to stitch it with Kevlar, which is about the strongest twine available. I would like to find that Peal and Stick Rubber Roll, but so far haven't found it yet. I have a boot on order and Industrial cement for the inside. Old Tire Repair shop's used to vulcanize with rubber strips, and a heat cap that was lit, which heated the underside. This Man has developed a similar way to vulcanize, by using a crude, but effective under the tire heat. Thanks for good old people that still will work. I'am 80, but still can move about to get things done. Any comments will be apreaciated. Thanks

[@saml7610]

I have ordered from a supplier called Acme Rubber in the past when doing repairs on tires like this. You should email them and inquire as to whether they'd sell you a smaller quantity. They typically do wholesale, but if you ask nicely, they're willing to ship out smaller amounts for a small fee.

[@lizardkingwalking]

It's not lost anymore is now. Thanks to KZbin and Bill Gates, we are now more smarter and wiser.

[@williammr9600]

Kudos to you. Never surrender to hard work.

[@yldrmcs]

@@saml7610Acme is the best. Thanks for bringing this up 🙏🙏🙏

[@Kunfucious577]

I suggest you think about this. The side wall is what holds up the tire. All the air pressure is looking for the weakest point to get out and that bandaide is where is going to go. It’ll blow like a balloon. Maybe not right away or even a little while. When it fails, it’s going to blow and jolt what ever you’re driving.

[@just.sovannara]

Wow! I was worried at the beginning of the video but after seeing the whole process i am totally impressed by the final result. This is almost a work of art! Truely amazing!

[@DINESHMOYAL]

😮

[@papercuts777]

You must get paid by the hour I could have knocked that out in less than 3 hours blindfolded😆

[@trevorbelmont-yg3fh]

Nah, it's a death trap. You've obviously never worked on tires before

[@alexdubinsky6098]

@@trevorbelmont-yg3fh you're right, the top of the patch on the inside did not even cure - you can tell the whole edge is still shiny after the vulcanisation. 😞

[@JoeSexPack]

@@alexdubinsky6098 No adhesive on the patch & sidewall to stick them together, or extra rubber around the patch for layered flexibility. Vulcanizing to cure the whole thing is essential, but the customer won't ever see it. Take it up the mountain roads of the Khyber Pass, what could go wrong? LOL

[@ollkorrect4353]

WOW! I didn't even know this was possible! RESPECT!

[@dxb8086]

It isn’t. Those patches will always be weak spots. A disaster waiting to happen. They do this out of necessity. If they had money to buy new tires, they wouldn’t do this.

[@maxortega4690]

After watching the man repair the sidewall on the tire, it all makes sense. The cleaning and prepping throughout the whole process as well as attention to detail on joining surfaces. The using of heat to vulcanize the patch is something I remember as a child.

[@РомаЛиходей]

Эта покрышка на выброс, дурачок. Она запросто может кого-нибудь убить при её разрыве. Дикари, вы скоро туалетную бумагу с презервативами стирать будете. Отсутствие у таких людей мозгов именно об этом и глворит

[@wallpurgesnight8209]

​​​​@@marshalkindo you honestly think they're doing this because they're trying to cut corners instead of ordering a new one off of tire rack or something? You sir / madam are a complete and utter tool... This is sheer necessity as there is no access / availability for a new tire thus making do with what is in hand. Pure craftsmanship & ingenuity... Furthermore I'd wager a new one of these tires is well over $1,000 if not five times that much. Which the driver would not be able to afford, again making do with what is available... And even brand new tires from reputable manufacturers have blowouts, tool...

[@rudypeev]

​@@marshalkinyou obviously have no clue as these types of repairs have been done for Decades and their failure rate is significantly lower than you think.

[@Wyomingchippewa]

@rudypeev bullshit any failure Rate is to high. Can't use string on a steel reinforced sidewall

[@mehmeh1999]

​@@marshalkinThat's why they're sold as cheaper alternatives afterwards or used as a back up till a new one is ordered.

[@DoLo_XO]

These tires are mad expensive, got to repair if possible, for sure. Great work, absolutely amazing craftsmanship.

[@aristonia1991]

The only real question is; how safe is it by today specs.

[@سلكالغسالة]

@@aristonia1991 For sure it's not a road used tire It might be use for a shovel truck working off road in a crusher area or building site or so. Even the shovel truck wiil not move in a long distance range in the site. It will stay working in the same area loading or unloading So it's not for road speeding purposes so I think it's safe They will keep on repairing it until it's all gone So even this repair does not stay for long it will not harm anyone when it get damaged

[@saml7610]

@@aristonia1991 with a little common sense? Perfectly safe. Just don't stand near the repaired tire when it's under load, then it if goes boom, no one gets hurt. So long as no one is hurt by a rapid decompression, it is simply an annoyance getting the earth mover/truck/whatever machinery uses this tire out and into the repair shop on just three wheels. A tire like this would be around $2500 USD, so even if refurbishing it means more safety precautions must be taken on the jobsite, it is still worth it to repair and use until it's worn out.

[@saml7610]

@@sparklesparklesparkle6318 sounds like a skill issue to me. Just be careful and you won't get hurt. Should tell your friend/uncle to stop drinking on the job.

[@aristonia1991]

@Kual Svinus Someone needs to learn to talk to people.... inbred

[@lordaizen8004]

Crazy I didn’t know Alvin and the Chipmunks were so big over there…. Jammin out to the “classics” 😂👍

[@MarcoHernandez-lc9vc]

😒🙄😑😒

[@mycountrymylife7759]

Highly difficult task but this wise man did it so technically. Extremely strong man. Long live.

[@geraldoreis7989]

Ensina teu filho no caminho que deve andar , poque quando crescer não desviará dele👏👏👏👉🇧🇷👈

[@sog4646]

I bet his hands are hard as rocks.

[@Jack_Mehoff7221]

Very shoddy work he performed

[@terraversalvoid5391]

​@@Jack_Mehoff7221 oh yes? As compared to what exactly?

[@davenoejoe]

​@@Jack_Mehoff7221We know where your hand strength comes from.

[@Helifella882]

Fantastic, these people are the true recycling experts. Nothing is beyond them. What they lack in modern machines they overcome with pure ingenuity and hard work.

[@ndt7379]

This is literally going to explode on the road and get people killed or injured at worst.

[@playinnpwnin]

and also materials you can order online.

[@deflash]

Recycle expert that blow all the crap in the air 😂

[@Helifella882]

@@deflash A lot less pollution than making a new one. His carbon footprint in work is next to nothing compared to an average Western worker who drives to work, has every appliance under the sun and eats take away. All while spending most evenings watching Netflix, farting and moaning about the state of the planet while the third world dig out and graft to make a pittance but are happy many with a smile.

[@DinkyDoughnut]

@@deflash When you take your car for an MOT, don’t tell me you’d wanna scrape through for as little as possible even if your vehicle is a smoker.

[@RobertSmith-bn3zw]

now that was impressive. the young lad was such a great helper

[@geoffrey6000]

nothing impressive about this. Patching a sidewall with a shoelace. This tire is going to kill someone when they put it on a machine.

[@Kunfucious577]

I’m not too sure this is a good idea. I’ve seen these people do some really incredible work but this one seems like a set up for someone to crash. It’s really unsafe.

[@WhatwouldRoddyPiperdo]

​@@geoffrey6000India's population of 1.4billion I'm sure they'll really miss a few 😂

[@geoffrey6000]

@@WhatwouldRoddyPiperdo Thats a dumb thing to say. It's still human life.

[@WhatwouldRoddyPiperdo]

@@geoffrey6000 I don't hold that in high regard so what?

[@Administrator_O-5]

Respect & love from the USA friends! These guys are awesome! I love watching them turn scrap or damaged parts into refurbished & usable again! Amazing talents! 😇

[@gort5583]

Truly incredible to see the labor that goes into such repairs, the only problem I have is that I bet he gets paid a pittance for doing it!

[@ElDepressivo]

Well, with a 15$ profit he is probably the richest man in town now! Perfect example that we throw away to much things.

[@rrssmooth6643]

i was thinking i hope he gets paid well for that one.

[@lupelicious822]

Only took him a half hour ¯\_(ツ)_/¯

[@AquarianNomadic]

I'm not sure their society works on a capitalism type system.

[@chaps1444]

He only has a little palace with 30 rooms and 80 camels....🐫🙏

[@hawaiianrussian1047]

As easy as he made this look, the years and years it took for this man to make it look that easy deserves praise in itself. There are a lot of men who start off as apprentices in a field and even over years lose motivation and give up and become sloppy at their job. Only guys who never gave up and endured years upon years of grinding can make hard laboring tasks look easy.

[@sfarias16]

This guy never gets TIRED

[@wrecktal_seepage]

Comments like these just TIRE the hell outta me

[@LuisGomez-vf8ki]

@@wrecktal_seepager

[@meinukey]

I'm sure he suffers from BURNOUT every now and then.

[@JohnSmith-uc7jt]

😮😢😢illlllĺķķ

[@LegionzGG]

Comments like this DRIVE me crazy

[@truefigmandu1810]

Good to see him passing his knowledge along to another generation and better seeing the young man eager to learn and willing to work so hard with him.

[@davidroosa4561]

or maybe.....hear me out........send the kid to school to learn to read and write

[@GG-ii1uc]

@@davidroosa4561 sure, but that is not always possible

[@bamdbamds9963]

@@GG-ii1uc ll llo

[@RehabProjectSRCB]

@Blasphemous Sadly over their our ideas of age are not easily found. Too us that's clearly his grandpa, but to them alot of our parents look like they'd be our siblings. Their life is just so much harder that a 50year old man from the west vs from the middle east is just not comparable.

[@Luis_Diehl]

Is it? Instead of going to school to be a doctor, an engineer or a teacher (etc), those children are learning a manual task, which will pay next to nothing, in order to survive. Please, stop romanticizing poverty.

[@SaborLatino21]

Brother you deserve an award for that amazing job you did. GOD bless you.

[@gpero8680]

This gentleman is extremely strong, he moves this tire like it weighs nothing!

[@englewood1971]

He is probably 40-45 years old 😎

[@1000HillsTravelers]

Experience

[@joyngamkhumlo2520]

@@englewood1971 40 to 45 are you kidding...he is 60 to 65 years old.

[@fm1224]

It's all technique... Moving heavy things is more about technique... Why he makes it look easy.

[@Joshua-jj4xn]

Did we watch the same video? It looked quite difficult for him

[@Civilwarpiper]

Tire time bomb 💥

[@palmtreewhisperer]

Perfect for the Ex wife's new boyfriend 😅

[@carey_metv]

When a man can do a job while smoking you know he's a professional.

[@KCECC-ActiveHealthyAgeing]

Truly admire these ingenious hard working people. Love that boy help to climb in the big tyre to remove the supports. Wish them well & happy.

[@Incognito-vc9wj]

When I saw the thumbnail I was thinking “hell no” , but this is actually a VERY thorough repair!

[@abutalhasiddique6287]

I thought the same.

[@jetstreamdefalpha5411]

Same. But the labor is hard and tedious. Didn't expect it to turn out so perfect

[@thatguy4305]

same. thought it looked sketchy first, but this old man obviously knows what he is doing.

[@Epitheos]

Can't even tell it blew up

[@lloydchristmas1086]

​@@Epitheos It will blow there again. Tire should have been disposed of.

[@maninthewilderness3208]

Skill 100% Work Ethic 100% Safety Flip-flops 100%

[@bhupendrasingh-ip3vq]

आपकी लंबी उम्र हो आप ऐसे ही पंचर बनाते रहे 🙏🌹

[@castper28]

Wow!!, what an incredible job 👏🏼, I love that the kid is helping and learning the skill, priceless!!.

[@fmphotooffice5513]

...the young apprentice possibly securing his future.

[@brothazoot]

I questioned this man's methods till I saw the lit cigarette held in his mouth. A true artisan he is.

[@boyinpyjamas]

Its always so satisfying to see skilled labour and motorcycle noises for me. You get the feel he puts honest work and experience in this.

[@narendrashah733]

Its great! What a skill! I highly appreciate the person who is doing his work so sincerely & precisely! Unbelievable! Whoever & wherever he is hats off to him. I love to see this kind of work. Wonderfull skill.

[@nickc7494]

Unbelievable dedication to get the job done. His skills and determination is incredible

[@AdityaPoonia_Bishnoi]

Salute to Uncle and kid, usually with someone who has these roadside skills it's problematic that we Indo Pakis always bargain with them and never know the honest effort in making this scraping tire work for long and the confidence with you about the patch that gets repaired as newly updated as newest. Respect for work is truly appreciated by not having mentioned safety gear as usually they do.

[@thefirststudentzero]

I noticed the lack of anything that could protect feet fingers and eyes 👀. That was a worry especially when he used the spinning grinder and tiny chunks of rubber and materials went flying. Amazing job!👍

[@chillandthrill]

@@thefirststudentzero welcome to the subcontinent, brother.🤣🤣🤣

[@shah008]

indo mean india bro

[@davenoejoe]

And notice the guy did not try to catch rubber in his eyeballs like an idiot in western Countries would by nature do.

[@charlycharly6300]

sir you and your grandson just recreated the strongest tyre on the loader it came off, the psi pressure will hold that in place alone, forget the adesieve, a great video, a great channel, if you make we will watch, 🤝👍💑.

[@mf4148]

That's not his grandson it's his brother 🤣

[@pavosimunovic]

F

[@suerayss]

what a guy. Hard working, creative and such a thorough job. Kudos to such artisans!! Love from India. Hope they pay him well for this job. He deserves a lot for this job.

[@palemki]

oh a street shitter is impresed by a job that should not be done on a tire. But ye he deserves a lot of money lol

[@egads3696]

​@@palemkiwell he did fix the tire, so....

[@palemki]

@@egads3696 Are you joking? Or just plain stupid.. do you even drive a car? or just ASK someone you trust if u repair a tire on a side like here and listen why you fucking dont.. its a fucking russian rulete

[@palemki]

@@egads3696 You must be plain stupid.. even google will anserw your stupid thought. Repairing a side wall of a tire lol with so much pressure + a fucking 3rd world country technique cmon..

[@suerayss]

@@palemki Wonder what kind of racket you run and wonder who you scam for a living. I hope you sold your mom to the right guy to buy your shitter.

[@_Trenchfoot_]

I’m more impressed that he still has all his fingers and toes still

[@Sinkorswim317]

I can’t believe they use this after 😂 these tires can easily kill you if they explode 😂

[@KS-vo3hf]

they r reinforced with wire, rubber and ceramic what else do you want?

[@_Trenchfoot_]

@@KS-vo3hfclosed toe shoes too much to ask?

[@tjboy313]

​@@_Trenchfoot_ yes, the rubber can be used for more repairs

[@_Trenchfoot_]

@@tjboy313 😂

[@mjm7187]

Great to see old school repairs, especially reinforcing the sidewall. Making do with what you have versus a throw away society .😊

[@Wyomingchippewa]

How is string reinforcing an area that was made of STEEL and rubber???

[@herpnderpn2484]

​​​​@@Wyomingchippewaits not a steel belted radial, its not even a steel belted. Its a bias ply tire that uses nylon cords. The only steel in the tire is where the bead is. Besides, even steel belted radials use nylon in the sidewall, many use it in the belts as well.

[@mistersinister2043]

@@herpnderpn2484 It doesn't matter, that's not how you fix a fucking tire.

[@egads3696]

​@@mistersinister2043looks pretty fixed to me.

[@GenX-007]

From what I've heard when there's sidewall damage you throw it away, because it can't be reinforced and it'll blow out again-it's a danger to everyone on the road.

[@113016ify]

What a real man he is! Gotta love a man who still knows how to work his hands and little equipment!

[@_m_K_.]

I don't think people who have never worked with a tire can appreciate how strong that man is the way he was moving that tire around. A tire that size probably ways 200-250lbs, easily.

[@williamsedlak1822]

I guess smoking 🚬

[@williamsedlak1822]

Is the real reason for his strength and stamina!!

[@jacobilewis9603]

Or how easy he made it look sewing it up.

[@koffiarizamoto9326]

I’m a tire tech. And I think he did a good job. I was more concerned about the safety of that. I know they have a thing where they will weeks tread to larger semi tires?? But this just comes off as dangerous to me.

[@tp1558]

*Weys

[@robertbowling8393]

I watch every one of these that I can. The pride of workmanship, skill and determination to do the job right is something many could learn from. Such craftsmanship is to be commended... Kudos to this man on his hard work ..... and I'm sure it IS demanding. Congratulations on work well done. P.S. Many questions, such as exactly what is the painted-on material, as well as the adhesive-backed material? Im assuming vulcanizing paint and vulcanizing rubber sheeting. It's all very interesting to watch being applied.

[@davenoejoe]

The naysayers can't make money off of it so they put it down.

[@Nohorizon1]

Fixing a sidewall is like no no number 1 in tire repair. Very dangerous

[@dmw870]

Sometimes you have to make a choice between going out of business or performing a makeshift repair on your tools and equipment. Plus I think a side wall repair matters less on low speed off-road vehicles.

[@Niever]

​@@dmw870No, it matters, especially with a tire that size. It more than likely goes on a big vehicle that weighs a lot.

[@L.kas92]

You think they give a fuck lol?

[@kkoch666]

​@L.kas92 They obviously don't care if someone dies over a rigged band-aid repair.

[@rm4po4]

Serious question, would the tire being used with tubes matter? I'd imagine low pressure tubes in this type of tire would be normal, but I have no idea.

[@Yusufartart]

Это робот крепкого здоровья ему и его семье и чтобы они были всегда сыты за адский труд который он делает

[@МишаМиша-у3ъ]

Адский труд это работа в шахте а это обычная работа

[@duboshlt8646]

Цэ Украина💩🤷🏿

[@Дмитрий-к2ц6е]

Отец дай бог тебе здоровья 💪работу которую ты выполняешь безумна тяжёлая,👍🔥🔥🔥🔥👍

[@orxanesgerov6132]

Я пака смотрела на видео, так жалко стало этого человека. И представила себя как он устаёт на работе. Ишо не дай Аллах дома жена варчун, сила тебя кормилец семьи и здоровье.

[@Cucumber83]

@@orxanesgerov6132 они это делают с малых лет и занимаются всю жизнь ) это для нас тяжело , а для них как обычно )

[@Akellaaaaaa]

Не только тяжёлая, но ещё и бесполезная. Хорошо нагрузить, и выстрелит в любой момент. Скорее всего просто продадут как "не битую, не крашеную"

[@Cucumber83]

@mike Russian 🇷🇺

[@викторантонов-с9п]

@@Akellaaaaaa по себе не мерь

[@rcary]

Good to see the young lad helping out and learning the trade. No mobile phone distractions or any complaining.

[@ddespair]

He’d likely rent have a choice. He also probably doesn’t know what it’s like to be a child. Hardly admirable to see children not able to be children. You only get that age of innocence for a short window and it’s gone forever. I doubt you’d give up your childhood for a trade.

[@Steven-tl8fs]

Yea, I'm sure the boy wants to grow up and be just like the old dude. 😂

[@wahnsihansi]

I have never used a mobile phone or the internet either!

[@farooqahmedkhan]

Hard work. I hope you get well paid sir. Salute to your dedication and thorough detailed repair work.

[@georgiannejohnson4420]

Like the rest of you guys , who watched this video....I have seen many amazing things on YT... But this one...I can truly say , is one of the most incredible I've had the pleasure of watching . Such a lot of labor...wonder how long this process actually takes ? And his attention to detail , on every step , is impressive .... Wow !

[@wyyeesjehhe9195]

Моллоодец. Ттруддяга

[@march1903]

@@wyyeesjehhe9195 What language?

[@OfficerD82]

Probably takes 4 - 5 days. There seems to be a lot of material drying processes, which take up a lot of time. I also imagine this one project makes this guy about the same money a Mc Donald's cashier makes in one shift. Or probably even less. 😥

[@НОВЫЙВЕК-ъ2э]

​@@march1903Русский

[@williammr9600]

It was timed with several cigarettes.

[@chandrakant1479]

When someone works with a cigarette in mouth, you know you're seeing an expert.

[@GrahmHorner]

Exactly!

[@richardsanchez5444]

Except if they're an oil refinery worker.

[@brothazoot]

​@@richardsanchez5444 The videos that you see of drillers smoking are often drilling for water not oil. The drill rigs for water are far less regulated.

[@B3nnywhit3]

amazing to see the work that goes into a repair like this.

[@midnite22767]

I couldn't stop watching this video. Appreciate the watching a master at work! This child should be in school.

[@michaelgoble8200]

The child is learning essential skills. He is like an apprentice.

[@ItsKyleMang]

This is school. Leave your do-gooding at home.

[@midnite22767]

Easy to say when its not your child. keep your lectures to yourself.

[@thegto8535]

@@midnite22767 It applies to you as well.

[@CuhahhFoo]

Even on his day off this guy goes to work! Great job

[@shoaibshabz6882]

Just give this the money he asks for this job.. do not bargain.. this is incredibly hard work and to do with such perfection.. I'd rather give him a little extra than what he asked just as an appreciation for the hardwork alone 🙌

[@moser3712]

Don't you see her is a mushrik? He is smoking ( doing nasha!)

[@أرضالزّيتونالأبيّة]

Big UP ☝🏼

[@kkoch666]

What if his repair doesn't hold? Is there a warranty guarantee?

[@brym4467]

this man deserves to be in prison for what he did to this tire

[@phillyry]

Thank goodness this kinda stuff is regulated in the USA

[@smoothlyrough512]

Still a better place to live than the dump this dudes living in.​@@hpee500

[@ominous-omnipresent-they]

I agree.

[@Drakholm]

Really depends on the use case. Tires this large (usually) have notably lower psi requirements. Shit, looking at his repair, it wouldn't surprise me if something inches outside the fix-it site gave out first. The U.S. may have regulatory benefits, but it's just one of the many things that ensures competition is a matter of capital. Aka, the rich getting richer. For mineral extraction...it's set up to be indefinite.

[@dunderwood4444]

My brother is NOT old, he's very active, mobile and clearly working. Skilled labor would have been a better title. I bet he would run circles around most teenagers #RESPECT Bless up from Brooklyn NY

[@Dannyhunter1970]

A lot of these people haven't a clue and sit on there phones all day wouldent o what a good days work is that man is clever and fantastic 👍👍

[@saidufofanah2210]

You think? I would of never guessed he has far more experience then a teenager

[@saidufofanah2210]

@@Dannyhunter1970 here you are, thumbing thru your phone like a teenager.

[@raymondcarter1137]

Is this kind of repair really better than getting a new tire? Is this cost better because it’s cheaper to repair? And yes this is very tough work and he has excellent control.

[@ericbattista9341]

Definitely old. Do they teach the definition of words in Brooklyn schools?

[@mr.perfect1er]

How they vulcanized that rubber repair is truly human ingenuity. Godspeed and Blessings to Them and Theirs...Truly

[@mr.fantastic7756]

What does vulcanize do?

[@modrobert]

@@mr.fantastic7756 Melts the rubber chemically.

[@cheapskateaquatics7103]

​@@mr.fantastic7756 it hardens the rubber

[@Niever]

​@@mr.fantastic7756Both comments are pretty wrong. It's the use of natural rubber and an additive like sulfur to harder and strengthen the rubber. Because natural rubber isn't durable.

[@kkoch666]

Can you guarantee this repair will hold?

[@jacobspark1863]

Yeah, I’m with you guys. At first I was thinking “oh yes the black paint makes it look like a fresh patch lol” but felt bad because this guy put in the work 💪

[@JayB2]

Considering the tools they have there to work with its very impressive.

[@rudidian3386]

Opĺlllĺlllllllllĺlllllĺllĺllllllllĺllllĺlllĺlllllĺllllllllllĺlllllllĺllllĺllllĺlllllllllĺllllllllllllĺlllllĺ

[@rudidian3386]

Lĺĺlllĺllll

[@lowboy1one1]

Someone should open a harbor freight over there

[@A2017JSCR]

No need sophisticated tool for that

[@Knight_Kin]

Not even a stirring stick though. :(

[@jesusgallardo6955]

I'm so proud to have seen this Duo work awesome together. Nothing beats strong work ethic! You should be real proud of you're boy.

[@Knight_Kin]

Yeah the kid sitting around was a good contributor.

[@smartiboi]

The patch is still really sketchy given how monstrous the initial sidewall hole was, but this is easily the best Pakistani industrial tire repair I've seen on KZbin. From the cross-hatched stitch to the quick cement tread mold. It visually looks pretty good

[@brym4467]

this man deserves to be in prison for what he did to this tire

[@anmordal-swe2203]

A new tire like this can cost between 1200-2000$ easily. Well worth repairing!

[@savagedabs8536]

Depending on what it goes on these tires can easily top 10,000

[@sirfartsalot1328]

Regrooving is also an artform. First time I saw a regrooved agriculture use tire I was pretty fucking impressed. Boggers too.

[@rajaimran1159]

And this job should be cost around $50 in Pakistan Happy days for both sides

[@gamernav8245]

Pakistaan is poor condition because his maximum fund spend in terrism

[@davenoejoe]

Here's the deal everywhere he saved between 2 to 5 thousand dollars and will not get paid $300 at least they always want miracles but will not pay even a fraction of what it saves

[@saadatali749]

MAA SHAA ALLAH 💚 Excellent job.👏👏👏👏🤲🤲🤲

[@markdecarolis8714]

The most important part....AIR PRESSURE! Everything til the ending was FANTASTIC! RESPECT!!!!!

[@toikazhimo4822]

I appreciate the work done by this man...It's safes us some money but at the same it has high risk of getting burst..

[@moorekurtashley7377]

no it does not thats a dam good repair

[@soulsreaper7145]

yall put air in that??? the ones we have put fluid inside

[@alexanderkupke920]

@@soulsreaper7145 depends on what you do with it.

[@alexanderkupke920]

@@moorekurtashley7377 with the thread he used to stitch everything up it should work fine. It seems what people forget, this is not a tire for some car going 70 mph on a highway. This is something going slow most of the time.

[@YoloSwagginscz]

with the vulcanization the tire will hold as new one

[@romanregman1469]

This is a wonderful demonstration of museum restoration of ancient artefacts. That tire probably is stiff and crumbly, but in the hands of an octogenarian it is re-made into a whole new museum piece.

[@Northeastken]

I repaired and changed those tires in the late 70; s. I delivered and dropped off 2 that size and one larger earth mover tire. The cost back then just to drop them off was $11,000.00 for the 3. A tire damaged like that would have been tossed out, here in the U.S. This man put some serious time and labor into repairing this tire. Got to commend him and his young laborer for a super repair job. That tire is well worn, but in some countries, you have to make due with what you have. Job well done! Great vulcanization!

[@Knight_Kin]

I feel like this is satire. You should have started off with the fact that you aren't suppose to do this for sidewall damage, especially that large. You haven't done it in 50 years? That's a long time.

[@davidreynoso8833]

My respects to this old man he is a hardworking man providing and supporting his family

[@Gagay800]

Much respect to such people and such masters. You are great fellows. Make more videos and more repairs Hello from Kazakhstan

[@rushonakter4548]

✨✨

[@shabbirpatel2923]

Thanks, from Pakistan

[@Dangermonkey1000]

shut up from pakistan

[@SardarzadaSahir]

Pakistan is a land of loving and hardworking folks. Genuine quality speaks for itself ❤❤❤

[@ivanabernathova6652]

Tak treba! A so všetkými vecami. Klobúk dole, robíte pre planétu Zem a ľudí na nej záslužnú prácu. Boh Vás žehnaj ❣️🙏❣️

[@ab-jc8nv]

Hii

[@Jet-gateway1122]

It’s amazing what people can do when it’s born out of necessity. And something tells me that little guy works just as hard when there’s no camera.

[@taraschumacker]

Omg the way he used that knife! 😬 I can’t believe that man still has all his fingers..

[@germanpolanco7255]

Más que un trabajo, un Arte. Felicitaciones a las personas trabajadoras con su trabajo honesto.

[@jaylynch7022]

Hear here!

[@joedatuknow]

for shore

[@atombomb54847]

The end result looks better than most places that have the tech to do it quicker. Very impressive

[@samio3907]

No one talks about the poor kid who for sure has to work there every day.

[@palmtreewhisperer]

His Future. Yah 😲

[@DeadMeat991]

Not anymore.

[@stevencoyne4971]

Bloody Hard Graft ,Respect to you Sir !👍👍👏👏👏👏

[@Jordzeem55]

We can not find like this man in all United States 🇺🇸

[@uriahmorgan3879]

We exist we just have fancier equipment

[@TheBanjoShowOfficial]

you can, we just have the privilege to not have to do these things.

[@Knight_Kin]

This is such a dumb comment.

[@Chubbycat748]

Those tires are expensive, no matter what country you live in. Probably worth the repair effort.

[@Warder40Rus]

Неплохо. Осталось чернение резины замутить, и баллон будет как новый)

[@ab-jc8nv]

Hi how r u? It handwork

[@Esuper1]

When a new tire this size can cost new in the thousands it is probably more expensive than the entire old tractor its going on. Trippy to see the caveman style vulcanization process but man this has got to be a life saver for some farmer or construction company in that part of the world. Cheers!

[@Hardeststyler]

Exactly

[@mihaill1978]

kzbin.info/www/bejne/pmG1XoyNhqiZmrM this is not a cave option. and nothing new. These tires are worth the repair

[@evankolpack]

Not gunna lie, I was skeptical at first, but as someone who used to work on semi truck tires, this looks legit.

[@SovereignKnight74]

Wow! That's A lot of work to fix a tire! Then again, I'm sure tires are incredibly expensive! Amazing job!!

[@neuvatierra4324]

160.00$ at discount tires

[@Epochstudios]

A tire of that size is probably around $5000 usd mounted and balanced. They are super expensive....which is why it's better to pay a man like this a few hundred dollars for a repair instead of the cost of a new tire. Some tires and machines that work in mines go for as much as $50000 per tire. It's insane and a fookin very large tire lol

[@sirfreddiemercury6996]

@@Epochstudios it's a worn out tractor tyre... it's worthless.

[@elkeospert9188]

@@sirfreddiemercury6996 If it would be worthless nobody would pay this men for his repair work....And it seems he does such repairs not the first time....

[@hernandovillamarinbuenaven7476]

Outstanding job!!.. This mature man + young kid, real evidence Humankind ingenuity + skills + experience, are 'Real Time' proof that 'most anything' can be repaired. MUCH Love & utter Respect for these hard working men!!. This is a very hard 'kick ass' to actual 'replace anything / everything' trend. Many thanks & Blessings!!.. 🤗🏆🙏🙏🙏

[@yinjun-of3xm]

Very hard work, also developing countries, can find these workers。

[@realvargr]

That string will hold all that force.

[@palmtreewhisperer]

Of course it's made out of dental floss 😅

[@Horus2Osiris]

I'm betting it holds air with full weight. Excellent! Vulcanized too!

[@ravinderpalsingh2814]

You right bro

[@kkoch666]

Lasts 3 days..

[@RoaringEgg]

No idea why people are praising this guys work. This is a horribly patched tire. Hope this man never creates shoddy tires ever again.

[@watchbreaker1706]

@@chudleyflusher7132Are you sure? Wouldn’t they prefer to sell you a new one… cheaply made in third world country?

[@kutter_ttl6786]

​@@chudleyflusher7132amount of mental gymnastics you had to do to make this comment make sense in your head. Trump lives rent free your head, lol.

[@bssukru3934]

@@watchbreaker1706do you know what weight carry by these truck

[@watchbreaker1706]

@@bssukru3934 Doesn’t really meter if they can’t afford a new one and the old one works for an additional week. Don’t judge them with western standards.

[@iantierney6905]

Matter​@@watchbreaker1706

[@narcisoramos5949]

An Excellent job done,laboriously brilliant & sheer knowledge how rubber tires function . commendable!Can't Express Enough in Words my Amazement & how this people toil with superb Skill.Imagine how costly more it is to send the Tire for a Machine Recapping!?

[@FirstnameLastname-pe5ib]

When he got to 16:50 I said "gettt the fuck outta here". This is more than a patch. He fully created tire where there wasn't tire. Amazing work.

[@MrRoupy]

Show holding pressure...

[@Nggrngr]

Just because you’re good at something, doesn’t mean it’s something worth being good at. Still contributing more to society than gamers and streamers ever will. These folks got like 80 iq at best so I give them a break.

[@ohohohitzmagic4536]

Those rubber replacement patches have to be adhered to that side wall with an incredibly strong bond in order to take on that kind of pressure. Phenomenal job.

[@fishfire_2999]

The patches on the inside become even stronger when the tire is inflated .

[@dennnis6416]

The soft stuff he put on its rubber uncured im pretty sure that they use bond the the tread to the carcass of the tyre he literally vulcanized the patch on that part where he made the mold.

[@ohohohitzmagic4536]

@@dennnis6416 Right. He's basically melting the rubber fibers together. Very tedious work

[@MakiManRay]

Esperemos q aguante.

[@mrwhite877]

The carcass does not exist on an small place and you can't replace layers of steel weaving, with some thick cotton thread. They are'nt even vulcanizing the damaged spot correctly. This grandpa is making a sort of emergency repair, that is use AND brainless, because U can never use force on this tire again, let alone on the tread of the profile. I understand, that being poor is everything they have there, but this result is for the ass.

[@orvillehorner4326]

$500+ tire $12 fix.. Amazing 👏. Simply marvelous.

[@nasser-ist]

This is defintely a $7000+ tire! And who knows how much he got paid for this job is just anyones guess.

[@CuteBhalu-yz6wt]

in our country Pakistan he got about 70 dollars for this remarkable job...

[@thepurplestallion93]

These tires are upwards of 15k

[@scottarmstrong1196]

⁠I just bought 4 in Canada. On rims was almost 40 grand

[@OtherBerry]

Let's see Big-O Tires try to fix this one! 😉 Amazing work!

[@pkmechanics]

Excellent work

[@jonathanrangel565]

Legend says that this technique has been used for thousands of years since man made the first tire.

[@barryallen8753]

Please tell me you’re joking and this sarcasm

[@jonathanrangel565]

@@barryallen8753 it is. I am a very sarcastic person. It can be annoying at times but many love me for it.

[@barryallen8753]

@@jonathanrangel565 okay

[@presidentemaiq8652]

@@jonathanrangel565 bro why do you have to explain yourself to such a Rtard? Lmfao... like clearly it is a joke...

[@notagreeable2249]

I gave a like just for the use of adorable child labor.

[@vikashseenauth5565]

Amazing work. Hardwork and patience. Big Respect to uncle.

[@Dawghome]

What a sterling job, I couldn't stop watching, the ads got in my way of watching it...hated those interruptions but the end result was worth it...many thanks.

[@abenildojose1689]

Parabéns,Memo com toda as dificuldades são profissionais no trabalho .

[@richardwhite3458]

@mike 🏴󠁧󠁢󠁥󠁮󠁧󠁿 English is a option.

[@rurallegend1354]

Fascinating I’m very impressed the knowledge this man has is incredible

[@cesarvillena9377]

Por todo este trabajo este tipo se ganó solamente un dólar . Así de complicado es tratar de ganarse la vida en la India . Todos mis respetos para este señor , que Dios lo bendiga .

[@facadetudoumpouco8294]

Aqui no Brasil seria uns 300,00 ou uns 60 dólares.

[@bobbylong4443]

❤❤❤❤ wow wow wow and wow the amount of work involved is incredible 😮 him teaching his kids is awesome 😊unbelievable beautiful work and for his age I'm old too and man my tires on my truck are pain to move around lol and they are smaller lol I'm impressed thanks for sharing his awesome skill. 😊

[@RealG.Washington]

That will blow under a load for sure, lmao lord have mercy

[@Nu1SaNc8]

KZbin been wanting me to watch this repair for 2 years ….

[@indravadandave1616]

extreemly good i cant believe he did that