Size DOES Matter!! | Building a HUGE Media Console

[@laroseauxboisrosewoodwoodw8585]

Hey Keith , usualy i say nothing about security stuff but , here i had to 🥶 If you want to start your dado at a line , you ABSOLUTELY need to to have the back of the peace ( neer you) be on the table saw and the rest like you said slowly and bingo !! Why this way you say ??? Because of the saw direction , going towards you . If you want to keep your fingers that’s the way to do it 👍🏼👏. I just love to watch your vids , cats and your jokes 😜👍🏼❤️🇨🇦

[@KeithJohnsonCustomWoodworking]

🚨 That's a very good point. Thank you. Sometimes you get too focused on the camera angle and not the task at hand. 🚨

[@nathanielsnyder1323]

He has a Sawstop man. Also he’s been doing this for a lonnnnggggg time. I think he knows when something can be done and when it can’t.

[@KeithJohnsonCustomWoodworking]

@@nathanielsnyder1323 He is right on this one, but I appreciate the support!! 👍🏻👊🏻

[@sisyphushappyband]

Keith, your work is always meticulous and almost as sharp as your wit. Watching this one in particular got me thinking of pricing and how a piece of painted furniture like this seems deceptively cheap to build/have custom made, but the level of craft involved (and pure cost of materials) merits a pricetag higher than most would expect. Not to talk inside baseball, but I'd be interested to watch a video or two about how you make a custom woodworking business work financially, given all the factors at play.

[@KeithJohnsonCustomWoodworking]

Thanks so much! Admittedly, it’s EXTREMELY difficult to make a one-off custom piece like this work financially and foresee all the potential problems that will be encountered. It all looks so straightforward from the initial drawing 😂. Bottom line, some are winners and some are losers, but hopefully lessons learned save you on future builds. I do have a video coming out showing why I don’t build end grain cutting boards because of the insane amount of labor involved.

[@realpdm]

Turned out really beautiful.As others I listened to the podcast first and was excited to see the finished project. Outtakes of your misadventures would have been great but I have a feeling you weren't in the mood for filming. Thanks for sharing!

[@KeithJohnsonCustomWoodworking]

Thank you so much! Outtakes of me sweating and swearing during install wouldn't have been very flattering for me 😜😂

[@MCsCreations]

Really beautiful work, Keith! It looks fantastic! 😃 I didn't understand at first why plywood with MDF vernier, but if it's going to be painted... Makes sense. It's much easier painting vernier than plywood! Anyway, stay safe there with your family! 🖖😊

[@KeithJohnsonCustomWoodworking]

Absolutely! The MDF skin makes for a beautifully smooth surface for painting.

[@DIYHGP]

I can’t believe it I made it all the way through the total project thank goodness you talk fast.

[@KeithJohnsonCustomWoodworking]

😂🤣 I moonlighted as an auctioneer in college.

[@andrewbaston9752]

Great job Mr. Keith! I admire your level of perfection and your commentary is great.

[@KeithJohnsonCustomWoodworking]

Thanks Andrew! 👊

[@terristroh3965]

What a massive and incredible project! I’m amazed at some of the detail you showed, especially around the metal on the inside of the doors. Great work, Keith!

[@KeithJohnsonCustomWoodworking]

Thank you very much! It definitely tested me every step of the way!

[@mindyhall4638]

Oh to have the bag of tricks that you have in your head! Chamfering bit for the stops in the back of the panels to make it look like a miter. So impressive!

[@KeithJohnsonCustomWoodworking]

Thanks Mindy! I really appreciate the kind words 🙏😀

[@evanlove808]

If this whole woodworking thing doesn’t work out for you, you can always fall back on your beautiful singing voice to make a living. Great video and great cabinet.

[@KeithJohnsonCustomWoodworking]

😂 Thanks man! I have been called the songbird of my generation.

[@evanlove808]

@@KeithJohnsonCustomWoodworking 😂

[@holdemNE1]

Yes, I most certainly did enjoy watching the process. Thank you very much for posting.

[@KeithJohnsonCustomWoodworking]

Glad you enjoyed it!

[@jmzalazar]

Another jewel, what a beautiful piece of furniture. A magnificent piece. And now I follow you on TikTok! Thank you for sharing your "always" excellent work! Greetings from Argentina! Have a great sunday! Stay safe!

[@KeithJohnsonCustomWoodworking]

Tahini you so much for the support, Juan!! So glad to hear you are enjoying the videos. 🙏🏻😎

[@krisbabic89]

Love the longer video! This is beautiful. Thanks for the content. I love hearing the backstory on your builds on the podcast then seeing it on video.

[@KeithJohnsonCustomWoodworking]

Awesome! Thank you! And thanks for listening to the podcast! 👊

[@fitfobru7904]

I'm not that guy that says how much he "loves the content" but... Here I am saying I really do enjoy watching your videos.

[@KeithJohnsonCustomWoodworking]

Well, I greatly appreciate your comment and the support. Thanks very much! 🙏🏻👊🏻

[@chm1701]

And this is even more fun when you listen to the podcast and hear the adventures you had with this entertainment unit 😅

[@KeithJohnsonCustomWoodworking]

😂 the supplementary info definitely paints a different picture.

[@freddyvelasquez4168]

Keith, another fantastic woodworking project. Your attention to detail is impeccable. Shout out from Brooklyn. Take care.

[@KeithJohnsonCustomWoodworking]

Thanks Freddy! I greatly appreciate the comment. Cheers!

[@bartloncke9359]

You are truly the master of detail of all YT woodworkers. Quick tip: you 'd better buy a lamello zeta P2 which allows you to use the tenso. No more struggling with clamps as you showed on the mitred edge banding of the table top. A few projects like these and you earned the machine back. Cheers

[@KeithJohnsonCustomWoodworking]

Thanks! And I have a Zeta but a friend was using it for a much more Important project when I was building this.

[@spicyd6213]

Geeeezussss.....that opening. I was napping and that openings scared the crap outta me AND the cat.

[@KeithJohnsonCustomWoodworking]

How do you turn on a video while you're napping? My videos are meant to PUT you to sleep 😂

[@ejhill12]

A beautiful piece of furniture! A good finish really makes a huge difference, too.

[@KeithJohnsonCustomWoodworking]

I totally agree! And thank you!

[@BillPairaktaridis]

Amazing work, as always, Keith! I loved seeing your pieces come together and it's very inspiring!

[@KeithJohnsonCustomWoodworking]

Thanks Bill! Super appreciate the support!

[@matthewclemente420]

That is beautiful! Great joinery and execution. The paint job looks amazing. Nice job Keith and as always great video. Thank you !

[@KeithJohnsonCustomWoodworking]

Thanks a lot, Matthew! I appreciate the kind words! 🙌

[@ivanwalker3391]

That unit is so big you must have needed longitude and latitude to navigate your way around its construction. Nice one. Keep 'er lit Bro!

[@KeithJohnsonCustomWoodworking]

😂🤣 you’re not far off!

[@shincinedesign5408]

I'm looking forward to seeing your wonderful work. This is a video with a lot to learn. Have a nice day.^^

[@KeithJohnsonCustomWoodworking]

Thank you very much! 🙏🏻😁

[@ovaisallawala9079]

Sir, you are a teacher, I have learned so much from you.. thanks

[@KeithJohnsonCustomWoodworking]

That’s fantastic!! So nice to hear. 🙏🏻👍🏻

[@audioman99]

Hi Keith. I know you don't do many 'shop videos', but your shop has so many rather unique tools/setups... I'd love to see you do a video on your L fence used for cutting end rabbits, how you made your SS zero cl. inserts, table saw jigs(you use so many diff. ones during builds) and even a shop tour. I already copied your use of those Goldblatt rubber float for panels which is SO awesome. Thanks!

[@KeithJohnsonCustomWoodworking]

Thanks so much for the kind words and the interest in more content. Definitely more shop jig videos on the way, along with a shop tour, so stay tuned!! 👍

[@audioman99]

@@KeithJohnsonCustomWoodworking Fantastic Keith, Thanks for taking the time to respond ;)

[@KeithJohnsonCustomWoodworking]

@@audioman99 You bet!

[@rosariosalazar5887]

Señor Jhonson, como siempre hermoso todos sus trabajos, felicitaciones, tambien me gusta ver all gatito supervisor en todos sus proyectos, cuídese mucho, saludos desde Lima - Perú.

[@KeithJohnsonCustomWoodworking]

🙏🏻👍🏻😎

[@rodneydemars8359]

What size of TV is going on that beauty??? Geez that's huge!! Nice work

[@KeithJohnsonCustomWoodworking]

Hmmm...not sure, but probably something similar to a drive-in movie 😂

[@apowell389]

Masterfully done. I love the clean look. I will be making 1 about 1 foot shorter. Crossing my finger as.

[@KeithJohnsonCustomWoodworking]

Right on! Thanks man. And a foot shorter would have made things a lot easier! 😜

[@benrudman3917]

I have debated outsourcing my finishing for a few years now. I don’t have the margins, but I image if you know upfront an approximate cost you can build this into the quote. Beautiful job. It was nice to see your solutions to big project in smaller work space. I share this limitation. -Ben

[@KeithJohnsonCustomWoodworking]

Thanks Ben! Yes, knowing costs up front are key to outsourcing anything. Finishing seems to be the most cost prohibitive to outsource. Sometimes it's more than what it costs to build the piece.

[@Benoit83B]

2 things Keith: 1- If one day you get tired of Woodworking, become an "anything" commentator and I'll start listening / watching that "Anything" show! Your voice and jokes are just perfect... The Bond Joke! Nice one!!! 2- No handles? On the sketch there are!? 🥺😢🤦‍♂️🤣 Keep up the great work and thanks for those videos.

[@KeithJohnsonCustomWoodworking]

Thanks a lot, Ben!! Handles are still not chosen by the client.

[@Benoit83B]

@@KeithJohnsonCustomWoodworking ohhh that's why! Pretty sure you couldn't forget that! 🤣🤣

[@ps3shakes123]

I thought the doors were wicker from the thumbnail..metal is much smarter. It's a classic. Nice work.

[@KeithJohnsonCustomWoodworking]

Coincidentally, the client originally wanted wicker and then changed their mind to the metal 😂

[@ps3shakes123]

@@KeithJohnsonCustomWoodworking "i ain't scared of no dust bunnies."

[@KeithJohnsonCustomWoodworking]

@@ps3shakes123 LOL.

[@Itsdirtnaptime]

I love the random comments. Like as if someone else was throwing random clips at the time he was making commentary. "By later, I guess I mean right now." 😂🤣

[@KeithJohnsonCustomWoodworking]

😂 Thanks man!

[@GetOffTheCouchDesign]

Great video Keith, I was literally wondering whose shop you were in as you mentioned it. Well played.

[@KeithJohnsonCustomWoodworking]

Gotta play the road game sometimes...😜😂

[@TaylorHubbell]

Beautiful piece. The install seemed both cool and stress free. Love it when it goes that way… am I right?

[@KeithJohnsonCustomWoodworking]

If 10 hours over 2 days with multiple trips to the hardware store is considered stress-free, then yes 😂

[@TaylorHubbell]

@@KeithJohnsonCustomWoodworking still cramping I’m sure

[@KeithJohnsonCustomWoodworking]

@@TaylorHubbell 😂 always

[@pancua978]

What an absolutely beautiful piece! And of course, any video with Jerry is automatically 10xs better. It's scientifically proven. :D Thanks for the walkthrough on this project!

[@KeithJohnsonCustomWoodworking]

Aww thanks Katy!! Jerry continues to bring the heat in my videos…and Lola when she makes an appearance 😻

[@HobbystaAmatorPL]

Super robota. Dokładność na najwyższym poziomie. Bardzo mi się podoba. Pozdrawiam

[@KeithJohnsonCustomWoodworking]

🙏👍😎

[@mattbowers5342]

Excellent work again Keith! Love it!

[@KeithJohnsonCustomWoodworking]

Thanks Matt! I appreciate it!

[@RSST662]

Great video . Thanks . Need a continuous wrap around floating shelf for hallway flush above door trim video .

[@KeithJohnsonCustomWoodworking]

I’m booked through Christmas 😂

[@KeithJohnsonCustomWoodworking]

amzn.to/38q1ywN

[@RSST662]

@Keith Johnson Custom Woodworking Thank you so much !

[@RSST662]

The 300 DVDs I ordered from eBay for $99.99 + tax and free shipping = $106.99 will have a place , now .

[@RSST662]

No more Netflix saves $20 / month !

[@calston155771]

Another great build. I so enjoy your work and your great commentary style. How did you handle the seam (not showing) on the plywood top since you couldn’t use a 9 foot sheet?

[@KeithJohnsonCustomWoodworking]

The material used had an thin MDF face, so it's as stable as you can get. It was sanded flushed and primed and painted. Nothing more I can do to keep it seamless.

[@calston155771]

@@KeithJohnsonCustomWoodworking I’m sure it was a gorgeous as the rest of the piece. Thanks for the inspiration.

[@fiercegirldesign1]

First...to answer your question, it sounds like our childhoods calling us (I'm looking at all you Gen-Xers). Second...AMAZING build! I'm always so inspired by your projects and the fun, lighthearted way you share them.

[@KeithJohnsonCustomWoodworking]

Wow, thank you! And I think I had the same alarm clock for 15 years 😂

[@OldePhart]

Not sure which I like better, Watching you or listening to your commentary. Too bad about that burn mark in the middle of that maple. I hate that.

[@KeithJohnsonCustomWoodworking]

Thanks so much for the kind words! I greatly appreciate it. And that dang maple...😂

[@JustFun-vc2ri]

Beautiful....BEAUTIFUL!!! Your videos are always super informative and extremely entertaining. I was surprised to see you using maple. Was that a customer request? Maybe it paints better that other species? Curious. Thanks KJ, stay safe kind sir.

[@KeithJohnsonCustomWoodworking]

Thank you so much! I prefer maple over poplar because it is much harder and takes paint better in my opinion. It also machines with much crisper edges.

[@KeyWoodworks]

As much as you use that L fence, I still don’t know what the L it is. Finished piece is gorgeous man. You’re the lead in October FYI.

[@krisbabic89]

Aren’t you that weird guy who keeps his house at Sauna temps? 😂 just kidding. Love the podcast, never missed an episode. We keep ours at 69° constant and our room has a separate AC so it’s 65° when we sleep. In the winter the heat stays about 67° helps average out the bills lol. Thank you both for the content.

[@KeithJohnsonCustomWoodworking]

Thanks man!

[@billm4560]

Definitely another awesome job Keith and Jerry! 😸 I really liked that metal you used with the doors! 👍🏻 Oh I’m sure that was a rotary phone! 😀 Thanks for sharing!

[@KeithJohnsonCustomWoodworking]

Thanks 👍 The sound effect was called "alarm clock," but it may have been mislabeled 😂

[@matteason989]

Hey Keith - I bet you wish you had the Zeta for this build. I enjoyed watching I ran into a lot of similar design problems when I did my office. I don't do KZbin but I documented it over on the FOG.

[@KeithJohnsonCustomWoodworking]

Yes! The Lamello would have been clutch on this build and saved a ton of time during install. Luckily, it's in the tool belt now for all future cabinet projects!

[@MJ-nb1qn]

Hey Wild Man, Love the video. Please keep them coming. I had a 12’ cabinet to make once and did a similar approach as you did. Just that darn indirect hernia flares up now and then! Nice inset doors! 👍🏻

[@KeithJohnsonCustomWoodworking]

Thanks man! Definitely need to stick to smaller and lighter builds 😂

[@MJ-nb1qn]

@@KeithJohnsonCustomWoodworking - Wait till you get OLD Wild Man ! Stay young!

[@WoodTurningArt]

Great Job

[@KeithJohnsonCustomWoodworking]

Thanks so much!

[@lohitg9975]

You are an ARTIST ...

[@KeithJohnsonCustomWoodworking]

Too kind! Thank you 🙏👍

[@winstonsmith9740]

Brilliant as usual Keith. Very impressive.

[@KeithJohnsonCustomWoodworking]

Much appreciated! Thanks! 🙏🏻👍🏻

[@JNHEscapes]

Keith, another great video. Question: if I wanted to make lap joints on 2x6’s to create long boards, what daddo blades would you recommend for a good flat cut (and wouldn’t take forever). I need to create qty 18, 24 ft 2x6’s and would like to lap and glue the joint. Just curious if you had an opinion. Thanks!

[@KeithJohnsonCustomWoodworking]

There are many good ones out there...Infinity Tools Dadonator, Forrest Dado King or the Freud. All great options.

[@mikesvwcorrado]

God I'm always so impressed with your attention to detail. Your sock drawer must be so organized. What is you system for documenting which door is which before sending out for paint?

[@KeithJohnsonCustomWoodworking]

😂 my sock drawer IS quite organized. System for doors is using a nail set to put little dents in the bottom of the door to signify which number. So, door 1 gets one mark and door 6 gets 6. Pretty basic but effective. Eventually I’ll buy a steel number stamp set. In fact, I’m going to order some right now…

[@smilgu]

One word - beautiful!

[@KeithJohnsonCustomWoodworking]

Wow, thank you!

[@peterriordan1179]

Top job as always Kieth really enjoyed this build

[@KeithJohnsonCustomWoodworking]

Thanks Peter!! 👍 🙌

[@JeffFontecchio]

That piece is amazing, great work!

[@KeithJohnsonCustomWoodworking]

Thank you, Jeffrey! Cheers! I'm still exhausted from that install 😂

[@yvettewallus119]

Perfection.

[@KeithJohnsonCustomWoodworking]

Thanks so much!

[@josephromero1596]

Wow, super fancy

[@KeithJohnsonCustomWoodworking]

Thanks very much!

[@scope21]

Hi Keith, I always come back to this build because it's so nice and a good reference for something similar I'm building. On the legs, why does a set have a stop cut, while the other two have a plunge cut? I'm not understanding the difference between the two, and why it's necessary?

[@KeithJohnsonCustomWoodworking]

The grooves weren't perfectly centered, so to maintain the same position on the opposing posts I did plunge cuts, so I didn't' have to move the fence.

[@scope21]

Ohh that makes much more sense now with the grooves being off-center, thanks Keith!

[@KeithJohnsonCustomWoodworking]

@@scope21 👍🏻👍🏻

[@Rovin6]

thats alot of work , came out great as usual ... jerry playing with tape ftw

[@KeithJohnsonCustomWoodworking]

It’s always nice to see Jerry playing rather than his usual napping 😂

[@zerofiz]

Wax paper?! Mind blown.

[@KeithJohnsonCustomWoodworking]

Simple but effective!!

[@iqinpeter2023]

Selalu perfecc dalam pembuatan. Mantab bang!!!

[@KeithJohnsonCustomWoodworking]

🙏🏻👍🏻😎

[@andersonolive4553]

Newer woodworker here, is that L fence another type of auxiliary/sacrificial fence? Haven’t seen that before. Thanks!

[@KeithJohnsonCustomWoodworking]

Auxiliary, yes. It’s not sacrificial because it doesn’t get damaged, so it’s infinitely useable.

[@juanfranciscogajardo4987]

as usual.. amazing your work Keith!!!

[@KeithJohnsonCustomWoodworking]

Thank you! Cheers!

[@pinebeetlewoodworking3404]

I rather enjoy your commentary. Your videos are top notch.

[@KeithJohnsonCustomWoodworking]

I really appreciate that! Thank you 🙏🏻

[@parkwayconcepts8758]

My maple always has hidden burn marks, too! Strange how that happens. Slick commentary, as usual.

[@KeithJohnsonCustomWoodworking]

And I specifically asked for the "burn-free" maple. What a rip off. LOL.

[@pauljanas6417]

One minor critique...I would have recessed the leveling feet. They were too obvious in the final look....just my take.

[@KeithJohnsonCustomWoodworking]

Thanks!

[@CreativeCarpentry]

Nice neat clean looking project, any reason for using hard maple - just because it’s painted did it matter? Shocked at the chipped router bit ! That router bit storage video I watched when you first released it should have kept the bits in good condition 😝. Always look forward to your posts - keep it up 👍

[@KeithJohnsonCustomWoodworking]

Hard maple is preferred because it is hard...much more durable than Poplar. It is also a very close grained wood, so it takes paint better. And the carbide probably got nicked before the storage upgrade when my bits were just rolling around in my drawer 😬😂

[@prettynicefield1104]

If only everyone could listen to what he said at 7:47 that phrase need to be aply more and more often thanks !!

[@KeithJohnsonCustomWoodworking]

Amen brother! Thank you 🙏🏻

[@lougonzmart9466]

A Beautyful wood piece. Where is available the MESH?

[@KeithJohnsonCustomWoodworking]

www.directmetals.com/products/perforated-metal/decorative-perforated-metal/

[@smallshoptalk589]

I'm only at 8 minutes and this is looking nice, and strong.

[@KeithJohnsonCustomWoodworking]

Thanks!

[@matthewwasserman7709]

I'm in Jersey too!!! Great build. I typically finish myself, but I'm curious about outsourcing. I'm sure it's worth it, but how much do you spend for finishing on a project of this size?

[@KeithJohnsonCustomWoodworking]

I don't remember the exact cost of the finishing on this one, but it was at least $2K. Price varies on many things. They had zero prep work to do when I dropped it off because I had everything perfectly sanded and prepped and they able to wheel it right in the spray booth.

[@matthewwasserman7709]

@@KeithJohnsonCustomWoodworking of course. I'm sitting in the garage painting as we speak so it sounds very appealing to never paint again!!

[@HarlyGuy13]

Gorgeous piece. I’m curious about the levelers and why you didn’t insert them into the bottom of the feet? Is it just your preference in style? I’m 50/50 and really just curious.

[@KeithJohnsonCustomWoodworking]

I've done it both ways. Clients pay a certain price point and this wasn't worth the extra labor.

[@miltonbryant8308]

That was an awesome video Keith. I learned tons. Thanks!

[@KeithJohnsonCustomWoodworking]

Glad to hear it! Thanks for the feedback!

[@rovidsonfirmino1024]

Amazing cabinet. Nice job.

[@KeithJohnsonCustomWoodworking]

Thanks a lot!! 👍🏻

[@rptort90]

Love your content man! Such an excellent craftsman. Learn multiple things every time.

[@KeithJohnsonCustomWoodworking]

I appreciate that! Thanks a lot, Ryan. Cheers! 👊

[@Smudgie33]

Great video. The levellers looked a little unsightly, shame they couldn’t be recessed somewhat into the bottom of the feet for a cleaner look. Overall a lovely cabinet.

[@KeithJohnsonCustomWoodworking]

Agreed, but the tapered legs were too narrow to recess strong enough levelers into them. 👍🏻

[@chrisshannonmoeller781]

Funny presentation and amazing project.

[@KeithJohnsonCustomWoodworking]

Thanks so much!

[@guillaumecuenot6296]

Nice project as usual. I think it's time to expand the workshop 🤣 Beau travail Keith

[@KeithJohnsonCustomWoodworking]

😂🤣 You might be right. I’ll let my wife know I will be expanding into the dining room. 😜

[@guillaumecuenot6296]

@@KeithJohnsonCustomWoodworking she will agree no doubt 🤣

[@lougonzmart9466]

I loved!!! Greetings from México.🇲🇽🇲🇽🇲🇽

[@KeithJohnsonCustomWoodworking]

Thank you so much!!

[@mindyhall4638]

Quick question…any resources (articles, videos, etc.) on the L-fence that you would recommend?

[@KeithJohnsonCustomWoodworking]

www.finewoodworking.com/project-guides/shop-projects/the-incredible-l-fence

[@jamestaulbee4791]

You madw case construction both entertining and instructional. Nice video!

[@KeithJohnsonCustomWoodworking]

I appreciate that! Thanks a lot for the comment, James! 🙏🙌

[@RexusKing]

Definitely rotary phone. Question: What's that thing with a roller skate wheels that's attached to your router fence?

[@KeithJohnsonCustomWoodworking]

😂. I’m leaning towards phone myself. Those are Jessem Stock Guides: amzn.to/2WAaWvn

[@MJ-nb1qn]

I have the stock guides on my table saw also. I believe it has saved me many a time. I highly recommend!

[@joseantoniovongho2766]

Amazing project Keith keep it going 👍👍👍

[@KeithJohnsonCustomWoodworking]

Thanks Jose! 🙌

[@TheTranq]

Big project. Nice job

[@KeithJohnsonCustomWoodworking]

Thanks very much!

[@AndreasMacris]

Really well done, Keith. I enjoyed hearing about the design challenges and material choice on this build. Help me out here; are my eyes are deceiving me, or is the HDF plywood that you used thicker than ¾ inch? The darker MDF face sandwiching the lighter veneer wood core is giving off some sort of optical illusion. In one frame I’m sure it is ¾-inch, the next frame it appears 1-inch thick. So, what was the thickness of that HDF ply?

[@KeithJohnsonCustomWoodworking]

Thanks Andreas!! HDF is only 3/4", so must be an optical illusion. 👍

[@AndreasMacris]

@@KeithJohnsonCustomWoodworking Much appreciated, good sir!

[@gregmize01]

That intro was intense😳

[@KeithJohnsonCustomWoodworking]

It was my 10th take so it was super intense 😂

[@matsler89]

So question for the doorstops. Why not put them at the top and then you don't see them as much?

[@KeithJohnsonCustomWoodworking]

There are some at the top, too. You need both in case doors warp slightly, so you can adjust top and bottom.

[@ericwilliams538]

Yet, and other fine video sir!!!!...

[@KeithJohnsonCustomWoodworking]

Thanks again!

[@Tensquaremetreworkshop]

Great, I really need one of those- except, since all my media fits onto a single hard drive, shoebox size would be too big. Can you make a doll's house size version?

[@KeithJohnsonCustomWoodworking]

Sure. Price is the same. 😂

[@patricksimons560]

Great work! Where are the doorhandles? Thay were on the CAD drawing but not on the finished product. Are the push to open?

[@KeithJohnsonCustomWoodworking]

As I mentioned at the end of the video, the client hasn’t chosen them yet 👍🏻

[@lawrencep5427]

Keith....awesome build...... Do you like your Sonos Sub? Was it worth the price in your opinion? thanks!

[@KeithJohnsonCustomWoodworking]

Thanks man! Sonos sub? I was at a client’s home.

[@freddrashner496]

Awesome job 👍

[@KeithJohnsonCustomWoodworking]

Thank you Fred! Cheers!

[@bill50013]

That sound is the bane of my existence.

[@KeithJohnsonCustomWoodworking]

What sound would that be?

[@bill50013]

@@KeithJohnsonCustomWoodworking Alarm clock.

[@benjaminstrobel3622]

Incredibly talented. Nice work.

[@KeithJohnsonCustomWoodworking]

Thank you very much!

[@rreddyy]

Where do you find HDF? Do the big box stores carry it or do you need to find a specialty plywood dealer? I've never seen it before.

[@KeithJohnsonCustomWoodworking]

Specialty plywood dealer. 👍🏻

[@nandarinterior5367]

Good 👍👍👍

[@KeithJohnsonCustomWoodworking]

Thank you! Cheers!

[@hmsiegel79]

What, we don't get to see you spray kombucha all over yourself? :) Great job. Nice and clean.

[@KeithJohnsonCustomWoodworking]

😂🤣 Dash cam wasn’t working! Thanks man!

[@michaelschmidt8968]

Looking good as usual, Keith. Where did you get the blue registration attachment for your DF500? I’ve got the black one from Seneca, but am curious about the blue one. Does it work well for you?

[@KeithJohnsonCustomWoodworking]

Thanks Michael! That is the BigFoot by TSO Products. It's a a great replacement for the flimsy plastic one that comes with the Domino.

[@richardking7800]

always enjoy watching you work!!!

[@KeithJohnsonCustomWoodworking]

Thanks so much for watching! 🙏🏻👍🏻

[@dennisdickson6210]

Nice work 👍

[@KeithJohnsonCustomWoodworking]

Thanks very much, Dennis!

[@kestutisk9397]

Great video👌. Like 👍

[@KeithJohnsonCustomWoodworking]

Thank you!! 🙏🏻👍🏻

[@kestutisk9397]

@@KeithJohnsonCustomWoodworking I like your KZbin channel always good video and great job 👌👍

[@KeithJohnsonCustomWoodworking]

@@kestutisk9397 Thanks for watching!

[@clschinke87]

Hi Keith, I am trying to build a TV stand out of 3 30" wall cabinets, with only 2 legs on either end. I see that your initial design (sketch up rendering) had the same design i am trying to achieve. what was your reasoning for attaching the 2 legs under the middle portion of that furniture piece? I will be supporting the under side of the cabinets with .5" to .75" plywood, along with the same size on the top and sides. I will also be needing to support a 75" tv. Hoping to get your input! thank!

[@KeithJohnsonCustomWoodworking]

This cabinet is extremely heavy and without support in the middle, it will most likely sag at some point. The smallest bit of sag on this piece will also throw off all the door reveals.