Let me try to explain your 5° taper issue in ASCII. :-) Below you can see the rear view of the leg on the tablesaw. The diagonal line is your blade cutting the taper. |\ | | \ | | \ | You have set the blade-height to end up with a full width leg. So you aligned it with the upper piece of the leg. As long as you 'lift your leg up' using a support piece to the same height, the width of the leg is maintained since the blade will cut the upperpart at the exact same height (only the top of the blade touches the upper side of your piece). But without support piece, the lower part of your leg ends up lower on your table saw (and also on your blade), which means the blade is ripping the leg narrower because it is not the upper part of your blade touching that piece, but the middle part of the blade, which is closer to your fence at the bottom than it is at the top. As I read through it again, it might make the entire thing seem more complex, but hey, just my 2 cents :-)
@KeithJohnsonCustomWoodworking3 жыл бұрын
ok, ok, ok.... I think this DOES make sense!!! The lightbulb has gone off!! Thank you so much!! 👊
@OldePhart3 жыл бұрын
This would have been impossible to grasp without that ascii drawing. I could not follow the words. Excellent use of old tech. :)
@zacharytreat92233 жыл бұрын
Why is the middle of the blade closer to the fence than the top?
@RoelLoots3 жыл бұрын
@@zacharytreat9223 Because it is at an angle.
@pierreramos80183 жыл бұрын
You sir have a gift to teach! Will admit i had to read it few times, but when it clicked, cant imagine any better way of explaining it, even more a better illustration! Amazing!!
@lauramarshall6376 Жыл бұрын
Lola cracks me up. Her excitement is contagious! :)
@KeithJohnsonCustomWoodworking Жыл бұрын
She’s the best! 😻
@douglasbrown3493 Жыл бұрын
"How is his skin so white it is blue" is the best quote of the video. Thanks Keith for a great video. Please continue.
@KeithJohnsonCustomWoodworking Жыл бұрын
😂😜 Thanks man! Glad you appreciate my little jokes!
@crabtonia4 күн бұрын
Very smart pieceand a delight to watch/hear the process...I will catch up now with ALL the Videos...dgp/uk
@KeithJohnsonCustomWoodworking4 күн бұрын
Thanks Douglas! Cheers!
@FunoXXX3 жыл бұрын
I really love that you even put your cost of materials into this! Thanks for a great video with a lot of information.
@KeithJohnsonCustomWoodworking3 жыл бұрын
You bet!! Thanks for watching and the comment!! 🙌🏻
@slowcarpenter89173 жыл бұрын
"I'm just gonna move on"... Can't tell you how many times I've said that to myself on a project... Great work as usual.
@KeithJohnsonCustomWoodworking3 жыл бұрын
😂😜 thanks man! I would like to know why, but I think you have to cut the 5 degree bevels on the sides first and then cut the taper on the sled.
@SpencleyDesignCo3 жыл бұрын
Fantastic work on this one, Keith!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Eric!! I needed to get back to my walnut roots! 😜😂
@MCsCreations3 жыл бұрын
Fantastic work, Keith! Beautiful cabinet! 😃 The blue and gray doors really shine in there! Anyway, stay safe there with your family! 🖖😊
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks so much!! I am definitely liking the multi-colored doors. And if it some point I don't, then I can paint them or just make new doors! Be well!
@rogerwoods13513 жыл бұрын
great work Morsels, it looks fantastic
@KeithJohnsonCustomWoodworking3 жыл бұрын
😂😜 Thanks Roger!!
@krisbabic893 жыл бұрын
I bet Jason was loving when that drawer kept popping open 😂😂 always nice to have a friend when things don’t go as planned lol. Also bet he loved the pocket screws. Looks great man! Thanks for the content!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Oh yes, he quite enjoyed the snafu 😂. Thanks so much for watching!
@81Sevit3 жыл бұрын
Un capolavoro. Fantastico!!! ...when the student surpasses the master!!! 🤣
@KeithJohnsonCustomWoodworking3 жыл бұрын
🙏👍😎
@crtzmo3 жыл бұрын
Perfect example of what a good idea, knowledge and experience, quality tools, and attention to detail can create! Beautiful result 👌
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you very much! Super appreciate that!
@yvettewallus1193 жыл бұрын
Keith, I think you might be the male version of me. The cats, the La Croix, style of furniture… and after listening to your podcast I can tell you’re a bit of an introvert. Glad I found you; I love watching and listening.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Ha! That's wild! I knew there were more of us out there. And thanks so much for following along! 🙌
@JimHester3 жыл бұрын
Beautiful cabinet! The push-to-open drawer slides look like they are push-to-close when you use the push-to-open, but soft-close when you just pull them open.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Jimmy! You can technically just pull them open, but that can get the mechanism a little screwed up and it may not engage.
@JimHester3 жыл бұрын
@@KeithJohnsonCustomWoodworking Good to know. Thanks!
@KeithJohnsonCustomWoodworking3 жыл бұрын
@@JimHester You're welcome!
@engiineerali3 жыл бұрын
Your work the meaning of perfect human workers
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you very much!
@rafaelmijares919711 ай бұрын
Hi Keith. I have purchased the plans for this project and built a cabinet for my daughter using many of the ideas in this video. Thanks for sharing your beautiful designs and building methods. Regarding the use of both soft close hinges and push to open mechanisms (23:48), I have a very simple idea: Every time a door is opened, immediately push the piston of the push-to-open mechanism closed with your finger. This way, when the door is soft closed, it will close up to the pre-closed piston as a stop and be ready to be pushed to open again. I hope it makes sense.
@KeithJohnsonCustomWoodworking11 ай бұрын
That is a great idea! And thanks so much buying the plans and watching my videos. Glad to hear you were able to build something wonderful for your daughter!
@tn92743 жыл бұрын
first time seeing colored MDF from factory. quite interesting and can save a lot from not painting for simple DIY.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Yes! My thoughts exactly. Just clear coat and go!!
@WildLiveTV3 жыл бұрын
It‘s a bit retro but very nice, of course! I really like the color-mix with grey and blue!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you! Cheers! And yes, mid-century modern for sure. 👍
@WildLiveTV3 жыл бұрын
@@KeithJohnsonCustomWoodworking as long it’s not medieval, I mean my generation 🤪. Just kidding, very nice…as usual!
@eusebioriveravelazquez86312 жыл бұрын
I'm amazed that this video have not reached the 1 million views. Great video BTW.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks!! It’s got a long way to go to reach 1 million! 😜🙌🏻
@FearsomeWarrior3 жыл бұрын
I like that you included prices and total. I hope you don’t get too many comments about it being high when that’s the reality. Enjoyed the different drawers. Good way for me to try different methods without waiting for multiple projects.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks man! No comments on prices...just that people like that I include them. Sometimes I don't realize the true cost of things until I add everything up at the end.
@joseantoniovongho27663 жыл бұрын
I been waiting for weeks keith 😁 finally my days pay off, good work Keith ✌️
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Jose! So glad you enjoyed it!
@kernchapman3 жыл бұрын
Geometry Watson...the perpendicular bisector of the previous angle causes the new angle to fall to the hypotenuse of the lateral movement between the 1st and 2nd cut, creating a bilingual movement of the walnut.
@KeithJohnsonCustomWoodworking3 жыл бұрын
😜😂
@amarjitbatchu3083 жыл бұрын
Thaaaank you so much for introducing this Grade A material to this market!!!
@KeithJohnsonCustomWoodworking3 жыл бұрын
You bet! Hope you are able to work it into a cool project!
@mauserkk983 жыл бұрын
Look nice, cats look happy with it .
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Nicholas! Cats love anything they can turn into a bed 😹
@WCFAsyncQueryable3 жыл бұрын
Nice, I only saw valchromat in Europe before your video (it is made by a company in Portugal). Glad we can finally find some in the US too
@KeithJohnsonCustomWoodworking3 жыл бұрын
Awesome, thanks! Yeah, it's definitely hard to find, but i think it's such a cool product! I'm going to track down a big sheet and use for an MFT style workbench top.
@displayheadsmedia2 ай бұрын
There are some red flashes before glueing montage, great video. I wonder too why the legs didn't come out straight.
@KeithJohnsonCustomWoodworking2 ай бұрын
Geometry was never my strong suit 🤓😂
@displayheadsmedia2 ай бұрын
@@KeithJohnsonCustomWoodworking maybe, but you are a great woodworker! Can't wait to start buying the tools and actually do some furniture.
@TheTranq3 жыл бұрын
Turned out nice looking. Those drawer slides have a lot going on haha
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks 👍! And oh my goodness, those drawer slides are out of control with contraptions! 😂
@TheDorin19963 жыл бұрын
thanks for sharing , good job
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks for watching!
@clarkhussey58653 жыл бұрын
Perfect intro! I had my feet up and my can of seltzer in hand. Great work!
@KeithJohnsonCustomWoodworking3 жыл бұрын
😂😆 My man!!! That's good living right there!
@ericborthistle3 жыл бұрын
Wow this is so similar to a tv stand I was going to make. Very helpful, thanks!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Awesome! Thanks Eric! Glad to hear it was helpful. Good luck with your project!
@arnoldolorenzo34742 жыл бұрын
Thank you for showing your thought process and even mistakes and how you solve them. It gives me confidence to be creative and be Ok with mistakes. Sometimes I feel down when I see how perfect things turn out for others and mine are wonky. 😂
@KeithJohnsonCustomWoodworking2 жыл бұрын
You are so welcome! Editing can hide and gloss over a lot of mistakes. There isn't time to show them all, but take comfort in the fact that we ALL make multiple mistakes and ran into multiple issues on every project.
@matthewclemente4203 жыл бұрын
Very nice Keith greta lines and door details. Thanks
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Matthew! Much appreciated. The wife seems to like it, too 😜
@PeterGoode13 жыл бұрын
Great video! It’s great to finally see some pricing included in the videos. Something not many woodworkers post along with their builds. Also Jason flipping the cabinet is a great touch! Awesome video Keith!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Peter! Pricing seems to be a popular feature, so I will definitely include it in future videos whenever possible. And Jason was instrumental in that flip 😜
@PeterGoode13 жыл бұрын
@@KeithJohnsonCustomWoodworking that would be awesome. You have a great channel with some great content! It is very much appreciated.
@Rovin63 жыл бұрын
simple looking yet elegant , great work ... easy going lola laying next to the draws & jerry's QC check ftw
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks man!! Don't know what I would do without Jerry and Lola chilling with me in the shop.
@cchrisstiaann Жыл бұрын
Man, I love watching your custom builds Keith! Every video you put out is so satisfying to watch, plus I get to learn so much just by paying attention to those details that make a world of a difference! I do wonder though, if Jerry and Lola are ok with you filming content on their company time?
@KeithJohnsonCustomWoodworking Жыл бұрын
Awesome, thank you! And as long as Jerry and Lola get their treats, they are pretty tolerant of most things 😹
@yvescouturier28013 жыл бұрын
So nice and elegant ! BRAVO Man !
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks very much! 🍻
@billm45603 жыл бұрын
Another awesome build Keith! 👍🏻 I really like those doors too! Never used that kind of material before! Plus it was cat approved! 😺🐈 Thank you for sharing!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Bill!! Those cats just love being in the shop…approval is an added bonus 😜👍🏻
@coleve85963 жыл бұрын
Although your table saw blade is parallel front to back, check it is also parallel top to bottom. It may be slightly out on its vertical axis. Most woodworkers only measure front and back because half the blade is buried below table level which cannot easily be accessed
@KeithJohnsonCustomWoodworking3 жыл бұрын
Any time I bevel the blade and set back to 90, I double check it with an instrument to ensure it’s accurate. 👍🏻
@cemontalvo123 жыл бұрын
I have the same saw as Keith. Its brand new, and I noticed that the width of the fence is concave by a few mils. I’d bet that by not referencing the same width of fence for the whole part, it introduces some turn in the part as it gets cut, and would be magnified if the fence falls out of square with the table. This perhaps explains why the wedge jig fixed the issue. Thanks for discovering this before I had to, Keith!
@KeithJohnsonCustomWoodworking3 жыл бұрын
@@cemontalvo12 it's definitely a little wavy
@martydrummond95383 жыл бұрын
Great styling and great content, loved the fact you inserted the costing
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks so much! Sometimes I forget how much things cost until I add them all up 😬😂
@julietphillips19913 жыл бұрын
My imagination says that Jerry told you that a little extra "umph" was needed for the drawer slides to work properly...the only problem with that is I didn't figure that is how Jerry would sound! Just as well since Jerry can't help you upright the cabinet. Keith, those drawer slides reminded me of something I saw once on Battlestar Galactica! I love the colored MDF and watching finish applied to walnut never gets old! It is awesome perfection and I hope it's for you! Love to your feline helpers.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks so much, Juliet!! And OMG I didn't even consider that it could have been Jerry with the off-screen commentary...so funny that you connected the dots on that. 😹. And now it's making me crack up. And yes, those drawer slides are a bit crazy and I have a feeling I will end up putting pulls on them eventually because technology on furniture isn't always long lasting...😜😂
@raftaargaming93103 жыл бұрын
Great job 👍 Love from india❤️
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you so much 😀
@TuckerCustomShop2 жыл бұрын
Very nice!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks man!! 🤙🏻👊🏻
@RoelLoots3 жыл бұрын
Nice build! I already noticed the cabinet during the octagonal bench build and was wondering when the video would show up. Thanks for clearing things up on the tipon+sofclose door mechanism. Who would ask such silly questions 😜
@KeithJohnsonCustomWoodworking3 жыл бұрын
😂🤣 Thanks man. I had to finish installing the drawers the day we started working on the octagon bench 😂. And I’ve learned to try and get ahead of questions, but I’m not always successful 😜
@rosariosalazar58873 жыл бұрын
Justo es el mueble que falta en mi casita, quedo bello como todo los trabajos que hace, felicitaciones, buen trabajo, saludos desde Lima - Perú.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you, Rosario!!
@pauldargue3 жыл бұрын
Fantastic work your a amazing carpenter
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks so much, Paul!!
@sebastianbecher89273 жыл бұрын
Love all your builds and presentations. The colours aren’t for me, but as a material, it’s really cool!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you so much! And yes, colors are definitely a matter of taste. Thanks for watching!
@bombinator7 ай бұрын
Love the style, looks like the furniture from GetHandsDirty. Amazing work!! I love your videos 😊😊
@KeithJohnsonCustomWoodworking7 ай бұрын
Thank you! 😊
@betoxxl67392 жыл бұрын
Beautifull cat, master. Great and beautiful works.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thank you! Cheers!
@TuanNguyen-iw7yg3 жыл бұрын
Nice legs Keith! Haha, keep them coming!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Mine are even skinnier! 😜😂
@Lumberox3 жыл бұрын
So. In the Army when we encounter a situation like that with no real explanation of how or why, we just say. Well it’s good for government work. Even now. In my shop. When I’m alone. I still say that when I am making things. Lol. Looks fantastic man!
@KeithJohnsonCustomWoodworking3 жыл бұрын
😂 I think I've used that expression a time or two...my father was in the military...Thanks for the kind words, Dustin! I really appreciate it!
@michaelvenditti59825 ай бұрын
I love all your projects and this is the one I like the least
@KeithJohnsonCustomWoodworking5 ай бұрын
I love all your comments, but I like this one the least.
@stallionranchwoodworks3 жыл бұрын
Very nice cabinet and the legs are very unique. I have to admit I'm on the fence with the 2 different color doors. But hey, nothing ventured, nothing gained, right? Keep up the fantastic work my friend.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks so much! Yeah, multi-colored doors are a new design aesthetic for me, too, but adds a little flare. 👍🏻
@richcartwright8893 жыл бұрын
Super job. Wow that's expensive. It looks as if it should be expensive though top quality.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Rich!! Yeah, sometimes you don't realize how much you spend on materials until you tally it all up 😬😂
@TheDesignerXD3 жыл бұрын
These look gorgeous. I'm definitely picking up some Valchromat for a few projects I have coming up... :)
@KeithJohnsonCustomWoodworking3 жыл бұрын
Right on!! I’ll be using it a bit more in the future myself!
@benjensen18798 ай бұрын
I’ve been looking for suppliers of valchromat in my area but keep coming up short. The only two I’ve found so far in the states are located on the coasts, New York and California. And unfortunately both are charging pretty hefty markups and are just as pricey to ship. Any suggestions or recommendations for someone in the middle of the country? 😂 I live in Texas.
@TheDesignerXD8 ай бұрын
@@benjensen1879unfortunately no. It’s far more available in Europe lol. I too am in the states and have not yet purchased any because of cost.
@user-nv6kc6xh9p3 жыл бұрын
انت مبدع👍
@KeithJohnsonCustomWoodworking3 жыл бұрын
🙏 👍
@ryansimmons381811 ай бұрын
Excellent work!
@KeithJohnsonCustomWoodworking11 ай бұрын
Thank you! Cheers!
@yvonnehughes30362 жыл бұрын
Really cool.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks!
@user-ut2qv2dk4f3 жыл бұрын
Very bewitching work!! Good luck from Ukraine 🇺🇦
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you very much!
@EvanDunville3 жыл бұрын
Wow that's a beauty!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks man!
@basti74633 жыл бұрын
Great video with attention to a lot of detail. I also appreciate that you were so open about the material costs for this project. Personally I'm not a fan of the mdf doors, but mostly due to their color. Overall very impressive stuff once again, thanks for sharing this build with us!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks very much! I completely understand not liking the color of the doors...it's certainly personal preference. Once in a while I like to try something different 😜
@davidc85602 жыл бұрын
Love this piece!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Many thanks, David! I'm fortunate enough to look at it every day in my dining room. 😃
@darbo73 жыл бұрын
A beautiful project!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you! 😊
@danielrybin20063 жыл бұрын
Awesome!!!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you! Cheers!
@garybell71383 жыл бұрын
Awesome job as always
@KeithJohnsonCustomWoodworking3 жыл бұрын
Much appreciated, Gary! Thanks for watching!
@JustFun-vc2ri3 жыл бұрын
This video is jam packed with awesomeness. Beautiful project, amazing video. As always, thanks for sharing kind sir.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Wow!! Thanks dude!!
@rovidsonfirmino10243 жыл бұрын
Amazing.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you! Cheers!
@danwinter130533 жыл бұрын
Beautiful!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you! Cheers!
@dubsbarry99632 жыл бұрын
Really good commenting man. Do you have to be good at everything?!? Gosh!!!
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 Too kind!! Thanks man!
@RobRobertson10003 жыл бұрын
Yes, those angles. As the top surface was inclining down while the sawblade was splaying out that caused the out of parallel to the fence. Easiest way fo course would be to layout and break out that hand planes, but that would not be Keith would it :) Beautiful build by the way
@KeithJohnsonCustomWoodworking3 жыл бұрын
😂 No, that would not be me! I appreciate the explanation...others explained it as well and I do understand now...so thanks for taking the time to help me out. And thanks for the kind words!!
@KarelKubela3 жыл бұрын
Beautiful. Great job buddy!👍🏻👍🏻👍🏻
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you! Cheers!
@jacoboalamea7173 жыл бұрын
Good Job bro
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks man!!
@TheLalalala123456783 жыл бұрын
"It's not that big"...You're being humble! Its a perfect size! ;D
@KeithJohnsonCustomWoodworking3 жыл бұрын
Bahahahahaha 😜. Thanks!
@johntoves90153 жыл бұрын
The angle! That's what's making it look like that!
@KeithJohnsonCustomWoodworking3 жыл бұрын
@@johntoves9015 And the iphone doesn't handle it well. LOL.
@lakhumpokphur83713 жыл бұрын
Wao buityful 👍👍👍
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you 🙏🏻👍🏻
@linehandwoodworking Жыл бұрын
The cabinet turned out awesome! Would you mind telling me what ruler you were using to check the thickness after milling? It looked very handy. Thanks, and keep the great content coming!
@KeithJohnsonCustomWoodworking Жыл бұрын
Thanks! I don’t recall specifically, but most likely a Woodpeckers hook rule. I use it ALL the time.
@chm17013 жыл бұрын
“skin so white, that it’s blue” 😂 This is super nice and very kind of Jason to fly all that way to help. You must have just had the right bottle of bourbon lying around. I really like the use of brass too; it adds such a lovely contrast to the walnut. May I ask why the different colour doors? Do they match a theme in the room? Anyway, a great job as always and another enjoyable edit. Thanks.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks Chris! No Bourbon on this house, so he was forced to drink LaCroix non-stop. 😂. I went with the multi-colored doors for more of modern look and our dining room needed a subtle pop of color. I like the visual interest of unmatched colors as well. And hey, if my tastes change, I can always paint them or just make new doors!
@chm17013 жыл бұрын
@@KeithJohnsonCustomWoodworking. Ah, of course, the LaCroix! It’s a regular podcast tipple, isn’t it? An added bit of colour… I see. Well, it certainly does add a nice touch of colour, but I completely forgot that you could just paint them 🤦🏻♂️ Have a good’un, Keith 👍
@KeithJohnsonCustomWoodworking3 жыл бұрын
@@chm1701 Thanks Chris!
@giacomoo49283 жыл бұрын
Bellissimo lavoro 👏👏👏👏👏 Grazie
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you!! 🙏 🙏
@caleb_bogie3 жыл бұрын
Took me a while to figure out why you’re getting different widths on that bevel cut. Since your blade is at an angle, the top of the blade is farther away from the fence than the middle of the blade. Since your piece was taller in the front than in the back, only a portion of it was being cut by the top of the blade, which again was farther away from the fence than the rest of the blade. Crazy! Hopefully that makes sense.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Yes! Thanks Caleb. A few people have explained it similarly and I think I have grasped the geometry of it now. Hallelujah!! 👊
@caleb_bogie3 жыл бұрын
@@KeithJohnsonCustomWoodworking 👍 Great job on this build! Always love watching your videos!
@plssmellmycheese2 жыл бұрын
Love the doors...otherwise "too much wood"...yes, there can be too much wood😉
@KeithJohnsonCustomWoodworking2 жыл бұрын
Fair enough! 😜
@luisalonsodominguez29583 жыл бұрын
Excelente trabajo keith muy buena combinación de materiales, tu y @Bourbon Moth Woodworking deberían hacer un buen proyecto.... Saludos!!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you very much!! 🙏🏻👍🏻
@JeffFontecchio3 жыл бұрын
That looks great!
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks man!! And it looks even better parked in my dining room and not on my workbench 😜😂
@woodworkingbn85283 жыл бұрын
Beautiful ,I really love ❤️
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you very much!!
@mindyhall46383 жыл бұрын
Love the build and really, really learn a lot from your thought process and the precision in which you approach things. Thanks! I’m down the road from you in New Hope, PA if you ever need an apprentice. :)
@KeithJohnsonCustomWoodworking3 жыл бұрын
Awesome, thank you! Good to know! 🙏👍
@JamesDeese3 жыл бұрын
You are cutting square to the taper so you have a parallel face to the angle of the taper, which shows as a taper.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Wild!! Thanks for explaining.
@m.k.49133 жыл бұрын
looks dope
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks dude! 👍
@johnniewalker393 жыл бұрын
Thank you Positive-Energy-Keith. Take care of them knees
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks man! Knees currently on ice! 😜
@mr_cysio3 жыл бұрын
The difference in width comes from you comparing it on a different height with a 5 degree bevel. So this should be equal (2 1/8) on the same height at the parallel side. Hope this makes sense?
@KeithJohnsonCustomWoodworking3 жыл бұрын
Kind of. I still can't wrap my head around it. I just figured that 5 degree bevel would remain the same top to bottom no matter what the height of the material.
@grant32263 жыл бұрын
Makes sense. In regards to making a safer bevel, I use a spindle moulder wit a tilting spindle so I run a straight cut head with the spindle tilted forwards to make the cut which also leaves a really nice finish. Use the power feed as well to keep your hand out of the way :)
@tomim71873 жыл бұрын
@@KeithJohnsonCustomWoodworking If you are cutting a wedge on both the top and bottom of the wedge at an angle, the pointy edge is further down the saw blade, therefore cutting more material thickness, than the fat end which is higher on the saw blade which is the at the width you wanted. Be the wedge.
@mr_cysio3 жыл бұрын
\ /
@KeithJohnsonCustomWoodworking3 жыл бұрын
@@tomim7187 Got it! Thanks Tom!!
@RobRobertson10003 жыл бұрын
Oh Goodie, another KJ build :)
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you sir!!
@cn656663 жыл бұрын
Nice work! It was very helpful to show how the Blum Movento slides work and links to all the various parts needed. You might consider doing a video on selection, sizing and installation of Blum hinges and slides. Blum's documentation is not easy to digest and other instructional videos are lacking.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Glad it was helpful! And I know! That catalog is bonkers with technical specs. It has me scratching my head all the time.
@cn656663 жыл бұрын
@@KeithJohnsonCustomWoodworking Just watched the drawer making video. You mentioned you would post a link to your favorite Blum site (Bent? Woodwork) but I don't see the link.
@KeithJohnsonCustomWoodworking3 жыл бұрын
@@cn65666 kzbin.info/www/bejne/gWmVnWSbmJyliJI
@reznor_597 ай бұрын
I came back to this to ask where you got the Valchromat and of course you already had it in the description! Any chance you know if Chris is still at the company and is the code still valid? Decided to watch the video again anyway since it’s such a good one!
@KeithJohnsonCustomWoodworking7 ай бұрын
Thanks! And not sure if Chris is still there, but definitely give him shout and mention my name for a discount. 👍
@kalebfear15593 жыл бұрын
Awsome Keith
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks so much, Kaleb!!
@popsikkel013 жыл бұрын
The reason why the leg comes out tapered is because the blade is only parallel to the fence in a straight (horizontal) line. The lower you get on the blade the closer it gets to the fence, So when you cut the leg it gets tapered. Raising the leg up helps because the upper part of the leg is horizontal now and the cut width is the same front and back of the leg.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Got it!!! Thanks Marc! 🍻
@jimgardner51293 жыл бұрын
Absolutely wonderful video. Enjoyable from beginning to end. That walnut makes me drool. Such a beautiful cabinet. Completely unrelated: your cat is so chill. Did he light up a blunt earlier that day? :)
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you very much! And Jerry is usually chill since he's pretty lazy...Lola is the sassy one 😹
@boyosof5 ай бұрын
Amazing ... what an expensive items
@KeithJohnsonCustomWoodworking5 ай бұрын
Thanks!
@jasgajaria3 жыл бұрын
Amazing content!!💯
@KeithJohnsonCustomWoodworking3 жыл бұрын
🙏🏻👍🏻
@muirjs3 жыл бұрын
The comedy is getting stronger every time. Soon you'll be able to give up woodworking entirely and just crack pleasingly gentle dad jokes.
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thanks very much! And since I'm not a Dad, I just consider them "jokes" around here 😜😂
@alexander_cp3 жыл бұрын
New band name idea: “Lola and the Drawers.”
@KeithJohnsonCustomWoodworking3 жыл бұрын
😹😂
@Lokey11002 жыл бұрын
Hi Keith, when it came to those feet that were cutting on the wonk, maybe it was something to do with the sacrificial fence not being parallel to your saw fence?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Fence was parallel. It has something to do with the bevel of the blade and how it meets the taper of the leg since there are essentially two angles at play.
@Lokey11002 жыл бұрын
@@KeithJohnsonCustomWoodworking ah right, like they say everyday is a school day, still an awesome console either way.
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@Lokey1100 Thank you!
@theGemmiG3 жыл бұрын
Great! Love it
@KeithJohnsonCustomWoodworking3 жыл бұрын
Thank you! Cheers!
@plasmac93 жыл бұрын
Did you get new video equipment cause the quality of the picture in this video is amazing. Or maybe your filming techniques are just getting better. Also, thanks for putting me on to Bourbon Moth Woodworking. Jason's style is very similar to yours as well as his personality. Really great video you guys collaborated on last week too.
@KeithJohnsonCustomWoodworking3 жыл бұрын
It's all about the lighting, Matthew!! All new American Green Lights LED's in the shop. I will have a video out soon on the installation and color differences, etc. But I am still filming everything on my iphone 11. And you're welcome for the intro into the world of Bourbon Moth...you'll never leave...😜😂
@plasmac93 жыл бұрын
@@KeithJohnsonCustomWoodworking I can't believe you're getting that quality out of the iPhone 11. Guess it's a testament to how good the camera is on that phone. I have been binging Jason's videos since I've seen all of yours. I really like the length of his and your videos. Not super long but long enough that you can give detail on everything you're doing.
@KeithJohnsonCustomWoodworking3 жыл бұрын
@@plasmac9 Yeah, the iPhone is all you need to create quality video. And it fits in your pocket!! All Jason’s videos are great, but pace yourself so you don’t burn through all of them too quickly 😂
@mindyhall46383 жыл бұрын
Keith-random question…have you ever used a pantorouter? Seems like it’s precision would really speak to you. I’m contemplating getting one so just wondering, from someone’s who work I really respect, if you’ve used one and what you thought?
@KeithJohnsonCustomWoodworking3 жыл бұрын
Hey Mindy! I’ve never used a Panto router. And the reason for that is… The Festool domino. The domino is so much more versatile being able to take the tool to the work, whereas the Panto router is a stationary tool and you have to take the work to it. It also requires shop space that I don’t really have. So it can only be used in the workshop. I definitely see the value in it if you are batching out joinery for tables and chairs on a regular basis, but I’m not. The Domino gets it done for me. Hope this helps.