Sizing Fire Protection Water Storage Tank for combined sprinkler standpipe system in Urdu/Hindi

[@amitkhedekar8473]

Thank you Tanweer Ji for making the video on this topic so instantly. It was well explained as usual.

[@TanweerAhmed]

Welcome

[@NiranjankrYadav-ro4gg]

बहुत ही सुंदर तरीका से आपने समझाया तनवीर जी दिल से शुक्रिया.. आप एक विडियो HOSPITAL 🏥 PROJECT के लिए video बनाए उसमे HVAC , CHILLER PLANT.... के लिए

[@TanweerAhmed]

Thanks and noted

[@faridkhan-mf5xg]

Sir g thanks for sharing knowledge

[@TanweerAhmed]

Welcome

[@YatendraSingh-sr6tq]

Great Explantion by you sir

[@TanweerAhmed]

Thank you

[@internationalsindhhighligh9323]

Very informative

[@TanweerAhmed]

Glad you liked it

[@setyopermadi2654]

Sir..NFPA 20, clearly determine sizing suction and dich.pipe, the question how caculate incoming/ Fill in pipe to tank.is there requirment

[@TanweerAhmed]

Depends on flow and design accordingly

[@mohammedtaher2064]

Eng Tanweer Brother kindly can u make a video for Lift stations installations & STP Thank you appreciated

[@TanweerAhmed]

Do you mean Elevator machine room?

[@mohammedtaher2064]

@TanweerAhmed no sewerage Treatment plant and Lift stations for external works

[@TanweerAhmed]

Ok noted

[@kowochill-mensah1823]

Do you have any teachings that shows you how to do a calculation on water tank?

[@TanweerAhmed]

Sorry, what you want to say? because I don't got your point of view

[@internationalsindhhighligh9323]

Thank you so much very detailed and their it is very important to understand however, how to identify each fire hose reel GPM capacity for example, I have fire pump which has 50 GPM size their and Installed 5 fire hose reels hence, this should be considered to dived 50 GPM into 5 and will come to each fire hose reel water pressure capacity or this 50 GPM specifically considered for one fire hose reel.

[@TanweerAhmed]

As per stand hose quantity and flow will be accordingly. As per area hose quantity decides. watch my previous fighting basic videos and then move forward

[@internationalsindhhighligh9323]

@@TanweerAhmed I am going through with your video by top and down all video are very useful and cover fundamentals notional that is reason I earlier please maintain the sequence

[@TanweerAhmed]

Thanks

[@Mohammed-x8c3z]

What duration of time need to consider in temporary fire protection for new construction site for high rise building

[@TanweerAhmed]

Refer NFPA 241: Standard for Safeguarding Construction, Alteration, and Demolition Operations

[@Mohammed-x8c3z]

@TanweerAhmed I'm nfpa 241 duration is not defined, then how much duratiom time need to consider in ksa

[@shamsularefin2467]

Thanks Sir. One question. 1. What is the maximum reservoir level for Vertical Turbine Pump?

[@TanweerAhmed]

It will be calculated according to fire pump capacity

[@shamsularefin2467]

@@TanweerAhmed Sir, Pump Capacity 750 GPM_9 BAR.

[@TanweerAhmed]

Further watch this video for understanding

[@israrsheikh9057]

Sir water type extinguisher ko kitne sal me refilling krni chahiye

[@TanweerAhmed]

I think 5 years

[@israrsheikh9057]

@@TanweerAhmed Esme bhi examiner 2 years bta rha h

[@TanweerAhmed]

@@israrsheikh9057 you should ask reference through standard

[@sudeshbala6976]

Sir 3hydrant post k liye kitna ltr water tank chlega.only ground floor hai.

[@TanweerAhmed]

Calculate accordingly

[@md.mominulislam6456]

assalamualikum sir Thank you for your informative video. I have a question, if an additional standpipe is more than 5 in a combined system then what is the total flow

[@TanweerAhmed]

W.Salam, Pipe size decide according to flow. Use MQuay software

[@md.mominulislam6456]

@@TanweerAhmedThanks, sir, for your reply, but my question was that you gave an example of only one additional standpipe in this video. How will the calculation for the water reservoir be affected if the additional standpipe is more than three?

[@TanweerAhmed]

All explained in video. Kindly revisit video

[@nawabkamran5541]

Bhai HVAC site Engineer ka video banao na ji detailly

[@TanweerAhmed]

Ok noted, I will start working on this video

[@naqqashsajid]

Thank you for the great information. I have 2 questions, Where we can use additional stand pipe Where we can use partial sprinkler system how we will know? Is it related with area of building like area of one floor greatert than 52,000 sqft than we use additional stand pipe?

[@TanweerAhmed]

1. Standpipe is riser pipe and more than one riser is called additional pipe. This decide by designer as per building requirements. 2. Only one floor has sprinklers and other floors are without sprinklers and just standpipe is installed. It is selected by client requirements due to budget or other reasons. 3.Yes one floor area greater than 52,000sqft as per NFPA

[@naqqashsajid]

@@TanweerAhmed Thank you for your response

[@TanweerAhmed]

Welcome

[@kAAmi181]

Sir additional Riser ma Landing valve nai ha. Kia Landing valve ka flow nai langa Tank capacity ka lia. Please guide.

[@TanweerAhmed]

If not available then no need

[@kAAmi181]

Sir if available then 2 Landing Valves ka flow Langa ya single ka. Just like hose reel ma 2 reels ka flow lia tha. Secondly as per flow requirements fire pump Selection ka kia procedure hoga.

[@TanweerAhmed]

Watch videos about standpipe NFPA 14

[@internationalsindhhighligh9323]

Dear why we are going for cubic meter density instead we can use specific gravity or simply 3.785/1,000=0.000378

[@TanweerAhmed]

If something is wrong then update

[@johnjoseph1789]

Sir how to calculated combined sprinkler standpipe system pump size

[@TanweerAhmed]

Ok noted

[@johnjoseph1789]

@@TanweerAhmed thanks for your response sir

[@TanweerAhmed]

Welcome

[@nawabkamran5541]

Sir HVAC site Engineer p video banao sir responsibilities

[@TanweerAhmed]

Watch my video "MEP project Engineer" which is almost same for HVAC site engineer

[@gurjitchahal8312]

Good evening sir, sir BA set ki video ka link nhi mil rha

[@TanweerAhmed]

BA ⁉️

[@gurjitchahal8312]

@@TanweerAhmed sir SCABA ke bare me full information chahie

[@anuarkhairul1810]

Assalamualaikum sir, How to calculate the size of the tank (light hazard sprinkler and 5 hydrant units)

[@TanweerAhmed]

Like same pattern of this video

[@SatishKumar-um8ek]

Ek smaal industry ke liye fire water tank ki capacity kitni honi chahiye

[@TanweerAhmed]

It designs as per pump capacity

[@SatishKumar-um8ek]

@@TanweerAhmed thanks sir but 70000 ltr are enough or not

[@TanweerAhmed]

Depends on system capacity

[@passionateengineer04]

Can you please guide me about duration of class III system?

[@TanweerAhmed]

30 to 60minutes

[@israrsheikh9057]

Universal extinguisher konsa hota h (A) foam type (B) wire type. Isme water nhi likha h (C) CO2 type (D) DCP type

[@TanweerAhmed]

DCP (Dry chemical powder) is called universal extinguisher or ABC fire extinguisher and used for all Class except Class-K

[@israrsheikh9057]

Ha sir examiner ne CO2 ans Diya h joke galt h or hm ne espe objection lgaya h

[@TanweerAhmed]

CO2 used for electrical appliance or accessories

[@Vicky32334]

Why did u cnsdr 2 hose fr combine riser. Why not 1?

[@TanweerAhmed]

You take 1

[@israrsheikh9057]

Plz sir iska ans btao na mene abhi exam diya h fireman ka or bohat se questions ese h joki examiner ne galt ansr diya h plz aap bta denge kya prof ke sath examiner ne prof bhi maga h agar sahi h to government ka exam h

[@TanweerAhmed]

You ask question, I try to response

[@israrsheikh9057]

@@TanweerAhmed to achieve the amperage necessary For fire alarm backup batteries should have to be wired in- (A) series (B) parallel (C) both series and parallel (D) alternative series and parallel Sahi ans kon sa hona chahiye sir btao

[@TanweerAhmed]

I think series

[@MDSK-mv7lu]

Fire Fighting Engineering ka Experience mai aapke pass se lena chahta hu sir Mai B.Tech Mechanical Engineering Pass out hu plz sir

[@TanweerAhmed]

You can help through my videos and if you have any questions then ask in video comments

[@mdtutulhasan9079]

How it can be 500gpm for sprinkler hydraulic calculation because As per ordinary hazard-2 we know 0.2 gallon/ft over 1500 sqft. So the water requirements will be 1500*0.2=300gpm But why you consider 500 gpm here??

[@TanweerAhmed]

How do you get 0.2 gallons/ft?

[@mdtutulhasan9079]

@@TanweerAhmed from density area curve as per nfpa 13

[@setyopermadi2654]

Sir, as per NFPA 20 for 1250 gpm and dia.8" suction and disch.pipe...the question how calculate fill in/incoming pipe to tank

[@MDSK-mv7lu]

Sir

[@TanweerAhmed]

What ⁉️

[@prabhatnair7817]

Thanks for sharing information..

[@TanweerAhmed]

Welcome

[@MDSK-mv7lu]

Fire Fighting Engineering ka Experience mai aapke pass se lena chahta hu sir Mai B.Tech Mechanical Engineering Pass out hu plz sir

[@TanweerAhmed]

Welcome

[@MDSK-mv7lu]

Aapse contact kaise hoga sir

[@TanweerAhmed]

Join my Telegram group and its link is given in each video's description and also community tab