SkeeRide 2 Build - 3D Printed Snowmobile

[@gibsonf06]

Wow it looks so smooth and refined compared to the first skeeride, definetly a quality redesign with some great engineering!

[@zachvick4255]

What size of battery like can you use a full size 3s or does it have to be smaller to fit in the sled

[@casadioDesign]

Awesome job! Looking forward to see my 3D printed Pajero on your channel soon or later!!

[@rcprinter]

yeah I'm gonna need to build one of your cars for sure

[@casadioDesign]

@@rcprinter awesome!! I can't wait

[@catman25]

Is brushless needed? I have a 550 brushed 12t just laying around . What size brushless if that's preferred ?

[@rcprinter]

Preferred motor is this sensored one: rcprinter.com/products/castle-creations-monster-x-combo Here's what I carry for budget: rcprinter.com/products/surpass-hobby-3674-brushless-motor-with-120a-esc-sensorless-combo Brushless isn't technically required. Preferred motor size is 3674 with ~2200 kv. A 550 has the same 36mm width so it should fit but not sure if it'll be the right speed/power for the skeeride. My guess is 12T might be too fast but IMO its worth a shot if you have one lying around and you can always upgrade later if required or perhaps try a larger spur or smaller pinion on the belt drive.

[@rcvalley8706]

Great video! I like the shocks, printing my first one right now and trying to decide on shocks. Are those from Amazon?

[@rcprinter]

Those are from Aliexpress... we just go similar ones in our shop: rcprinter.com/products/built-in-spring-shock-absorbers

[@jasenmosgood]

Newbie looking at getting a 3d printer. No so much turn use a rc as to hang in garage. What printer should I look into

[@Poulpc]

Nice build video

[@3D_printer_guy]

Did you hear about the hpd f1 competition 3d printed car? I have built it myself.

[@rcprinter]

yes, its definitely on the list to build

[@TRIPLExHAWX]

Where do I find the 3D printed parts for sale or the files to print them myself?

[@rcprinter]

www.myminifactory.com/object/3d-print-skeeride-2-267859

[@heini187]

Could you make a mini version?

[@rcprinter]

some people have... check the facebook and discord groups

[@jamesford3549]

The tool you use for the small screws, is it an electric screwdriver? Is it a special magnetic bit to hold the screws?

[@rcprinter]

yeah I have the makita 12v electric driver. The bits are metric hex drivers in different sizes, not magnetic although magnetic would be nice.

[@johnathanjohnson8011]

Would It be possible to get a decal kit from you?

[@rcprinter]

sorry I just print these out on sticker paper on my regular inkjet and cut them with scissors. very low tech.

[@QuebecoisSti]

Is it a Mamba X running on a small 3S pack ??

[@rcprinter]

Yeah i think it was running on 3s in the video but I've tested it upto 6s as well. I like 3-4s the best I think.

[@northminibikes]

Has anyone tried a TPU track?

[@rcprinter]

I'm sure if you check the discord server people will have tried it but generally this track is much more robust than skeeride 1 so hasn't caused a lot of issues when printed in pla.

[@billyjaggard9696]

Where can I get the lights for it

[@rcprinter]

I used this kit but had to extend some of the wires: rcprinter.com/products/4-led-rc-light-kit-2-white-2-red

[@ChadSchnuelle]

Will you or do you know anyone who will build these for a buyer.

[@rcprinter]

If you check the skeeride 2 page on myminifactory there's a link to a list of people that will print you one. www.myminifactory.com/object/3d-print-skeeride-2-267859

[@Beckofilmz]

Where can I get a track

[@rcprinter]

you can print one! Check out the authorized resellers list in the description here: www.myminifactory.com/object/3d-print-skeeride-2-267859

[@pinoyDIY72]

Wooow so impressive build bro👍👍👍done subscribes

[@rcprinter]

Thanks dude :)

[@jillkruse6596]

what battery?

[@rcprinter]

I'd recommend a 3-4s lipo if you have the same castle combo I installed.

[@matejmatej8162]

what size is the motor ?

[@rcprinter]

Its this combo kit: www.castlecreations.com/en/mamba-monster-x-sm1515-2200-010-0145-03 Technical specs are down the page a bit... Length: 75.4mm Diameter: 40mm (41.4mm with fins). You can get them here: rcprinter.com/products/castle-creations-monster-x-combo

[@ugovanmalderghem]

What is tour printer 3d

[@rcprinter]

I mostly use Prusa mk3's

[@toepunch001]

@@rcprinter so this will all print on a mk3

[@rcprinter]

@@toepunch001yessir

[@bigchadsmall]

Make a SOLAR powered car

[@mrmehau]

say is that sled the 165