RC Printer

Пікірлер

@funniersphere44 9 сағат бұрын

You can mold the parts and then modify an extruder to, in theory, make an injection mold filler. While it is experimental, it has been found to work

@NevilleCanteenwalla-pg2qt 14 сағат бұрын

Which filament would you recommend for the tires. Is TPU the best option, or PLA/PETG/ABS?

@jorgepiccelli4171 15 сағат бұрын

top

@brysonturner2851 2 күн бұрын

What did you use for the rear axle replacement?

@rad3d1951 2 күн бұрын

Very nice build video,paint,model. You just need to buy knipex parallel plyers for pushing bearings in. Really the best experience.

@ClayMartin-h7p 2 күн бұрын

Is their a place to get the STL files for free? Or do you have to go through CGTrader to get the STL files for the boat?

@ivansmith654 2 күн бұрын

I have seen a dude with a degree in Engineering do less than you by years he thinks he walks on water because of his degree he will never beat what you do, even if I trained this fool he could not pass you he does not have what you have this is your thing do this it may get old to you well find ways to grow this because this is you all day long! Let me tell you I know what I am saying and I know what I am doing I have nearly 40 backing me up in this and you got me beat hands down your a kid in my eyes that Engineer degree dude I dance all over him however you could dance over the both of us in your sleep! I am telling you do not stop what your doing just keep growing don't let people with degrees tell you what to do because you already know what to do there is nothing I could tell you it likely you would teach me I am older than your father do you understand me???? Yes I SUB & Like!

@maylon1399 2 күн бұрын

Print it at a scale of 1/5

@markushaidysek9180 4 күн бұрын

Cool looking RC car, like the "Rat Look". Amazing printing parts, they fit so perfect. Great job! 👍👍👍

@MysticRiverRC 4 күн бұрын

Killer build! The patina is fantastic! New sub, and liked!

@ripmax333 4 күн бұрын

Those shocks that you used, did you fill them with Oil or did you don't bother? Every shock I get from Aliexpress Once I fill them up they always leak the day after.

@bobbyspenser7304 5 күн бұрын

great build my friend i am looking for someone to build me a 1/18 scale unimog cab hollor back at me an let me know if you can do it or have the paterans so i could build it from styrene thank you for all the great videos

@pacificcoastminiatures 6 күн бұрын

Can't wait to start building my Reaper - almost have all the parts printed. Will get your full kit sometime early next month (after payday). What shocks did you use and do you sell those as well?

@rcprinter 5 күн бұрын

Hey thanks for the message. I used TooMod 50mm shocks that I ordered from Amazon last January. www.amazon.ca/gp/product/B0CN5NBKV7. The printed parts sheet that comes with your build kit also gives you recommendations and website links for shocks. Enjoy the build.

@andyrichey1192 6 күн бұрын

Wow, that’s super cool, I just subscribed Wednesday, November 27 watching now 7:53 PM. That is looking super sweet.👍👍

@rcprinter 5 күн бұрын

Thanks for the sub!

@calliewilliams9221 6 күн бұрын

is there any way to get this file? my man is obsessed with fj40s. he has two and is rebuilding one with a junked out one!

@rcprinter 5 күн бұрын

Hi Callie, you can get Reaper and Landy print files from 3dsets.com. Cheers!

@backrdfpv705 6 күн бұрын

Nice on the Lightning in the driveway!!! Keepin the trucks electric🔌

@rcprinter 5 күн бұрын

Love the Lightning...best truck ever!!

@ilindimitrov2626 6 күн бұрын

Looks great! Excellent work and execution. One question - have you ever thought about VW T3/T25? It would be great and there are quite a few enthusiasts around me and online who would put together a similar model!

@curtisnewton895 6 күн бұрын

nice shit dude

@MCsCreations 6 күн бұрын

Beautiful work, dude! It turned out amazing!!! 😃 Stay safe there with your family! 🖖😊

@rcprinter 5 күн бұрын

Thanks! Will do!

@MonsterPartsRc 6 күн бұрын

15:33 "I need to take it a little easy on the throttle" ...Proceeds to rip it at full throttle

@rcprinter 5 күн бұрын

Just havin' fun in the driveway!

@MonsterPartsRc 6 күн бұрын

So the diff uses bearings instead of gears to operate?.,.. interesting...

@MonsterPartsRc 6 күн бұрын

I've seen at least two sets of headlights, three motors, and two types of pipes... does the file come with all that or are the extra parts "extra"? Thx

@rcprinter 6 күн бұрын

There's a pack called the "downrider" which includes the files with the lifter servos and also a bunch of extra customizations like the ones you're asking about. Here's a link to the files: 3dsets.com/product/model-18-reaper-downrider-pack/

@WianBotha-z1w 12 күн бұрын

Cool boat busy printing it but just wanted to know what size screws and bolts you used on it

@red7fifty 12 күн бұрын

Those TowerPro servos are GARBAGE. Total lack of precision.

@red7fifty 12 күн бұрын

So loose, like a cheap hooker on a Saturday night.

@nelsonapontejr.6793 15 күн бұрын

What is the width of the boat? Not sure if the bed on my a1 mini is big enough.

@rcprinter 14 күн бұрын

Hey Nelson, according to the print manual for the Supersprint FDM 3D printer of minimum build size 180x130x180mm (XYZ). The widest Supersprint part is 179x128mm wide, the tallest part is 175mm tall. Hope this is helpful.

@SarahZhou-JLC3DP 16 күн бұрын

Hi, This is sarah.Your content is quite a match with our brand's service and application scene. I would like to invite you to experience our 3DPrinting service and test our materials. May I ask about your interests?

@MonsterPartsRc 17 күн бұрын

There’s another jet design out there that has double props to help avoid cavitation (the air getting in the prop) I think you should try that one… it seems more effective… I think it’s the M-Jet Super sprint… don’t quote me yet…

@MonsterPartsRc 17 күн бұрын

Interesting …. I’ve never seen anyone put CA glue on BOTH halves of something they were glueing together… nice project though… thanks for the video! I might have to add this one to the list!!

@rcprinter 14 күн бұрын

glad you liked it

@davidhyn 20 күн бұрын

What is the maximum rpm of the motors used? The author recommends 100 to 200 rpm.

@rcprinter 14 күн бұрын

Hi David, the motors in our electronics kit are the JGA25-370 Mini Motors DC 6V 133rpm. Here's a link with details rcprinter.com/products/openrc-tractor-mk3-tea20-build-kits?variant=43772053356705

@Loveveryday-f9j 23 күн бұрын

Are you selling these?

@rcprinter 14 күн бұрын

Hi, thanks for reaching out. We don't sell the 3-D print files but you can get them from this site!! 3dsets.com/product/model-14-max-team/ . When you're ready to put the build together we can help with fasteners, electronics, etc. Here's the link rcprinter.com/products/3dsets-max-team-build-kits?variant=42811085783201

@Loveveryday-f9j 23 күн бұрын

Fire 🔥.

@winfredhaan1 24 күн бұрын

What's the inlet and outlet of the water-cooling pipes?

@ItzPrizmm 25 күн бұрын

links to the mechanical parts of the boat?

@Tjup 25 күн бұрын

what wheels u using, im stuck ordering right wheels on Aliexpress, can someone help me out please---

@RR-km3ht Ай бұрын

Good afternoon! I would like to know: 1) Yes it can be done like the original with the inclined red line. 2) If there are options for better finishes so that it is left without the typical 3D marks 3) Approximate price and know where you can buy it. Thanks and greetings!

@rcprinter 28 күн бұрын

Hey, 1 - yes its possible but you'd have to design it yourself in your slicer with a multimaterial printer since this design is how it comes stock 2 - You could definitely fill the layer lines with spray primer and then sand and then paint to get a nicer finish 3 - You have to 3d print it yourself but you can find the design files at www.3dsets.com

@Csmith4811 Ай бұрын

Thanks for the awesome hardware kits, and content! I’m on my 3rd build right now using your kits!

@rcprinter 28 күн бұрын

Glad you like them!

@mc3dprints Ай бұрын

question. you show 2 different 3d printed rear axels. the one I printed off of Printables seams to short. Is there a different one I should be printing?

@thegamingfox523 4 күн бұрын

I think ThingsIVerse has the bigger version.

@stephenj3972 Ай бұрын

Can it be built without electronics and these easily added later? Thanks

@rcprinter 28 күн бұрын

Yeah, that should be possible but you would have to almost completely disassemble to the electronics in later.

@stevesloan6775 Ай бұрын

Go for a steel bed that you can use magnets on, to fix markers. The markers do not have to be on the object for your example. as for the black OE pad, you put markers on it. Mad how they stick. 😊😊 Put small ones one and do a miniature scan.

@SemiCollin Ай бұрын

How long is the run time on the 2200

@rcprinter Ай бұрын

Hey dude I don't rightly know for sure but I would estimate 10-15 minutes maybe. Depends a lot how you drive it.

@gunningopher Ай бұрын

I'm putting this together now. There are a few errors on the printed plans and this video is clearing a few of them up. I have printed the structural body componants with ASA-Carbon Fiber and the 'painted' parts with PETG. I have printed the non-functional parts (engine mostly) with PLA. I am now printing the suspension componants. I plant to use ASA-Carbon Fiber for the arms and things. Will that be too abrasive? I don't really trust PETG to hold up under stress and heat, although it will be better than PLA. I could use nylon. If I do the bushings in PETG will that be good. The ASA-CF is pretty abrasive. I'm a bit surprised that all the plates say "PLA" and there isn't much talk about which material to use. I would have expected that to be a critical aspect of the builds.

@rcprinter Ай бұрын

Hey man I'd stick with the filaments that are recommended in the build guide and on the build plates. I'm pretty sure I printed everything in PLA on this one including the bushings. PETG has more flex than PLA but I find it also shatters easily so I don't like using it personally. ASA-CF is not something I have experience with but it might be pretty good. I'd recommend looking into some other folks' experiences with the filaments you're interested in and perhaps asking questions over in the 3DSets facebook group here: facebook.com/groups/332578827350785/

@lucasalati369 Ай бұрын

The concept of the motor is wrong. The force to sink the back due to the impeller position and angle is higher then the output so not even with 30 engines will ever move fast

@lucasalati369 Ай бұрын

There must be something wrong with ESC/motor, It can't be that slow....

@rcprinter Ай бұрын

We upgraded to two motors eventually. You can check that out here: kzbin.info/www/bejne/mam1pKWLpdihbbc

@stuntwastaken1074 Ай бұрын

Looks like a bunch of tree support😅

@rcprinter Ай бұрын

yeah it does a bit! Full video is here: kzbin.info/www/bejne/boi5XnhuarpmeZo

@irvine40 Ай бұрын

Would like to build one. Can’t seem to find anywhere the print settings

@rcprinter Ай бұрын

Yeah it can be a bit hard to know what to use and the instructions for this build aren't great. Generally when printing these cars I use a standard 0.2mm layer height and standard infill % or maybe a little higher for body and cosmetic parts and then I increase the number of walls for any parts that I think should be more resilient such as drive train and steering components. For some of those I might even increase walls until those parts are completely filled with plastic.