Sweet Sam where did you get that rider? I just built a Pascal Polaris, waiting for snow here hopefully.
@eliasberntsson3458 Жыл бұрын
Nice! I'm working on mine right now. TPU spindles is the way to go. They absorb impacts on the skis wich makes them work like a servosaver and also saves A arms.
@Creech7098 ай бұрын
TPU spindles. Thats a great idea!
@jeffgTrialsBikes5 ай бұрын
Wow, very nice!
@danielemulazzi16158 ай бұрын
Stupenda...ne vorrei acquistare una per me !!! ...bel video... ciao dall'Italia
@CommonAk90710 ай бұрын
Awesome RC! Would be nice if us fans can purchase one assembled with your mods.
@chilly726110 ай бұрын
Thank you. For the record, not many people are building these to sell. It takes a ridiculous amount of time to print and build one. Another thing is you need a printer to make spare parts if you wreck it...
@billyjaggard96967 ай бұрын
U looking for one
@CommonAk9077 ай бұрын
@billyjaggard9696 yes, where can I order one ?
@larouchedavid1 Жыл бұрын
use polymax pla if you want something stronger
@billyjaggard969611 ай бұрын
Hello wats a good setup for it so i don't blow it up
@JustinBourque-qi7wy8 ай бұрын
Did you make this ?
@chilly72618 ай бұрын
All 3D printed, yes
@AdamJohnson-hv3xe9 ай бұрын
Hey Sam. I was curious how the size of the rider on the losi pro moto compares to the rider you have on the sled? I'm having a hard time finding the click and play guy you have.
@chilly72619 ай бұрын
Yeah, I looked that Amazon link up again for somebody else, it's discontinued. Buy a different click n play figure. I think the Losi rider is shorter, and heavier...
@scalermfg420 Жыл бұрын
Nice build man. I just started printing mine. Where did you get that rider?
@chilly7261 Жыл бұрын
Amazon... Click N' Play Sports and Adventure Snowboarding 12" Inch Action Figure Play Set with Accessories. a.co/d/8GPgK9A
@InukRyu939 ай бұрын
can i have it for free
@collinmccallum Жыл бұрын
dang thats fast!
@darryldeel9098 Жыл бұрын
Nice set up. Bummer the learning curve.
@chilly7261 Жыл бұрын
I should just cruise it around the yard... slowly 😀
@capitanoalex Жыл бұрын
Hello Sam, very nice vehicle.. wich KV did you use with the Motor ECS Combo? I like the castle ESC's i use them in my boats xlx2 Serie.. i also love the man on the skeedoo.. please show more, thx
@chilly7261 Жыл бұрын
Thank you. It's 2200 kv motor. That was a first run with a mishap at the end, def more coming...
@capitanoalex Жыл бұрын
@@chilly7261 thx.. 2200kv is a high kv but on 3S a nice speed.. yes the impact was hard but i think the spareparts can be printed easily...
@chilly7261 Жыл бұрын
@@capitanoalex It's what Build it Better recommends for 3s or 4s lipos along with the gear ratio on the pulleys. It's fixed and back together. We're getting some snow today, so a run on fresh powder coming up...
@capitanoalex Жыл бұрын
@@chilly7261 that will be great Sam let it fly through the powder
@TRIPLExHAWX11 ай бұрын
Where do you get the little figurine guy from
@chilly726111 ай бұрын
Click N' Play Sports and Adventure Snowboarding 12" Inch Action Figure Play Set with Accessories. www.amazon.com/dp/B07G9NP1XS?ref_=cm_sw_r_mwn_dp_ABADMBCFWG7P7K4HBKJX
@georgem.6136 Жыл бұрын
That Ski Is Fast! Really cool
@chilly7261 Жыл бұрын
Thanks!
@jacksonrandall534 Жыл бұрын
If i where you i would take the guy off. Not only will it look better the performance will drastically improve. Keep up the hard work👍
@chilly7261 Жыл бұрын
Really? No way! You won't see my sled without a driver figure. That looks so bad to me... Also, with this machine weighing 6-1/2 pounds, I think the 7-1/2 ounce driver weight is insignificant...
@jacksonrandall534 Жыл бұрын
@@chilly7261 well the thing is it makes it super top heavy and that is the reason why you crashed because you turned while going fast and the sled just tipped and rolled
@chilly7261 Жыл бұрын
@@jacksonrandall534 You are right on that. Maybe I'll remove it for speed runs next time. Just my opinion, but snowmobiles, motorcycles and boats with open cockpits just look better and more realistic with a driver.
@sokey70 Жыл бұрын
How will it drive without driver? Gotta have the guy.
@chilly7261 Жыл бұрын
@@sokey70 The handling most certainly depends on the snow. It's less tippy if it's not deep or has a crust on the snow. I test it without a driver in this video at the 16:04 mark... kzbin.info/www/bejne/jZ-Wool6e7yClc0
@coryturner9140 Жыл бұрын
TPU is the only way to go on handlebars and spindles…
@chilly7261 Жыл бұрын
You're right. I know that now, lol...
@coryturner9140 Жыл бұрын
@@chilly7261 😂 cool looking sled. I have the alpha one but very similar in many regards. I plan on printing this version since it’s revised and worth printing. The original skeeride was terrible…
@chilly7261 Жыл бұрын
@@coryturner9140 Yeah, this one is definitely a big step up
@37077 Жыл бұрын
Awesome man. Gotta love castle.
@chilly7261 Жыл бұрын
I do love Castle Creations. Great products & support...
@ronaldwriston1546 Жыл бұрын
This is the best video on the skee ride I’ve seen yet.
@chilly7261 Жыл бұрын
Thank you! I have more on my SkeeRide 2 playlist. And more coming on some really good mods...
@dustinstokes3134 Жыл бұрын
Sam do you print these to sell
@billyjaggard96967 ай бұрын
U looking for one
@sokey70 Жыл бұрын
Do you have a list of mods you used? If you used any? Your color combo is great BTW
@chilly7261 Жыл бұрын
Thank you! It's not scale but I'm pretty happy with my color combination. I'll make a video of all my mods. Stay tuned!
@sokey70 Жыл бұрын
@@chilly7261 that would be awesome. I just bought my filament and hoping to print this weekend. Maybe I'll start with the track until you share what you did.
@chilly7261 Жыл бұрын
@@sokey70 That will keep you busy for awhile. I printed all the body panels to the original files too. Are you on the SkeeRide Discord channel?