We’re going back to the basics with a deep dive into the select tool - how it works and why we need it! Whether you’re new to SketchUp or a veteran, this video has tips and tricks for everyone’s workflow. www.sketchup.com/
Пікірлер: 63
@andrewcooley191526 күн бұрын
You are an excellent instructor! Perfect in length and clarity.. I had my sketchup open on another computer and was replicating what you were doing at the same time
@afreshcolor2 жыл бұрын
Videos are honestly perfect for just jumping in - Not too long - enough information provided - Great job!
@petermcdonald7201 Жыл бұрын
I like the steady pace, and calm , unexcited delivery. It covers the essential information, without any distracting gimmicks. Good, professional instruction - Thank you !
@edmcgugan20793 жыл бұрын
Thank you again! Taught myself some of this stuff 10 years ago and yes, apparently I glossed over some of these details! Very useful.
@LewisKauffman3 жыл бұрын
Thanks! Being a self taught Sketchup user, there are so many of these functions that I didn't realize existed. Hope you do this with each of the tools!
@equalandthesame91103 жыл бұрын
Thank you. Basics and instructions are very much welcome, thank you again
@laimanwong5519 Жыл бұрын
I have been using the SketchUp for a while, but I do learn new skill from this basic course. Well done and thank you. Pls keep creating similar video.
@verngreenway48862 жыл бұрын
Professional, well paced, clean design. Good job.
@diederikheuts1203 жыл бұрын
Just looking into Sketchup. Was about to give up because many videos i found were not clear at all. Your videos are extremely clear , structured and to the point. Your style of explaining things is perfect: clear, relaxed with al little smile here and there. The challange now is to find the right sequence to watch and learn. I think i found square one with this selection tool :-)
@davidbridgeman84573 жыл бұрын
Been awhile since this old guy did some 3D modeling- it is refreshing to remind myself of all the basics while not being "talked down to" by the presenter. Nicely done.
@daviddickmeyer52313 жыл бұрын
Skill builder always comes up with one or two things I may have overlooked! Thanks Aaron!
@timothycazares85013 ай бұрын
The detail of explaination for each command is very helpful!
@alanl31902 жыл бұрын
Very professional. Excellent solid basics for a SU newbie - but with tempting tips and tricks that will be so useful and time saving.
@blanketgully Жыл бұрын
All good clear information. No waffle. I didn't think I needed to watch the Select Tool video- it's obvious surely? Wrong! I learned heaps. Many thanks :)
@warrengroves97763 жыл бұрын
great stuff, I am totally new to sketch up, bring it on!
@utv201006173 жыл бұрын
Thanks! Glossed over as in 'didn't realize'. Skill builder is an awesome value.
@b.k.veerendar307911 ай бұрын
very useful for beginners
@youssefabd73282 жыл бұрын
thanks a lot for the clear illustration
@GSPlan-id7mm Жыл бұрын
Simple and nice explanation. Thx!
@macmugah8443 жыл бұрын
Keep them coming nice tips learning a lot from you my brother from Kenya
@jimboelterdotcomm91533 жыл бұрын
Very welcome supplement to the Sketchup Campus material. Much appreciated.
@NinjaDav3Ай бұрын
i've been trying to figure out why drawing the same select area from different directions gives different results for days. thank you for explaining
@johnschiess81743 жыл бұрын
Thanks. I've been using SketchUp for many years and did not know the select key had these shortcuts.
@levi34944 ай бұрын
Great video! You are a great teacher. I thought learning sketchup pro would be super difficult, but you are making a believer out of me.
@TheHornoxx3 жыл бұрын
... especially the frame selection - either left to right or right to left - is an extremely helpful and smart feature. An ability SketchUp shares with some other CADs...
@DavidPhillipsAustin3 жыл бұрын
CORRECTION: At 3:43 you talk about the Shift-key modifier, but the screen shows the [Space] icon. Aside from that, Kudos! The clarity and pace of the speech, the use of the graphics, and the clarity, flow, and comprehensive coverage of a well-focused topic are outstanding. Congratulations to all involved in the work.
@ArthurRainbow Жыл бұрын
Came here to say that
@GEK69NY3 жыл бұрын
Very useful!!!!
@rossgebert94223 жыл бұрын
Thanks Aaron; yes i did learn something!!
@petercrisologo75913 жыл бұрын
Excellent!
@introtobuildingandconstruc79713 жыл бұрын
these are great videos! Perfect for my high school students. Just a heads up. When talking about using the shift key to add to a selection on the screen the spacebar image appears in the lower left corner rather than shift. Time stamp 3:42.
@tombrown84283 жыл бұрын
New user and like the basics.
@madeleinekohler28352 жыл бұрын
Helpful for my beginner students!
@donaldbennett5170 Жыл бұрын
Thank you very much
@ydiar Жыл бұрын
Thank you 😊
@decoventanas28583 жыл бұрын
Saludos desde Panamá 🇵🇦
@jorgeconcheyro3 жыл бұрын
Hey "master" Aaron (bow), this is fantastic for guys like me trying to start with SketchUp!!!. Maybe you can create a new playlist with these "Square One" videos? Cheers from Buenos Aires!!!
@stevehoge9 ай бұрын
Got confused at 3:43 when you mentioned holding down the Shift key but the video shows the Space bar is currently depressed.
@brittanyharman57543 жыл бұрын
Thank you so much for the videos. You taught me a lot and saved me lots of time and frustration. I’m having an issue with solids/solid components. I make 3D printed buildings so having it as a solid is a must. I’m trying to make a brick house which uses a ton of solids (bricks, shingles, window frames etc...) when I try to use the union or the outer shell tools to make it all one solid the program to stops responding. I mostly use free sketch up up I currently have the free trial for pro 2020 I have the same issue with both (i would be willing to buy the pro version if need to make it work but would prefer just the free version) is there a way to fix this or work around it? A reply would be awesome but a video would be amazing. Thanks again for all the helpful videos.
@abdlat123 Жыл бұрын
I have seen many videos related to sketch up. All are not well explained for a beginner. Your Step-by-Stup approach is very useful and can be learned clearly. I really appreciate your efforts. I want to be a master in sketch up.Seekiing your advise. I do cad drawings. Please upload how to work in cad file to make 3d and animations with rendering.
@sutheal2 жыл бұрын
Awesome vid - from a beginner
@-WILD-3 жыл бұрын
Hey Aaron. SketchUp +V-Ray Next 👍👍👍
@michaeldeburgh21733 ай бұрын
Very helpful. Thank you. Is there any particular function if you click, or multiple click, on a vertex of lines?
@wallmachine87803 жыл бұрын
Please make a tutorial on making chamfer sides such as 45 degree cut on circle, rectangle etc
@abubakarahmed79973 жыл бұрын
nice one
2 жыл бұрын
@3:55 Shift key is holding but it shows Space.
@jhow1243 жыл бұрын
Very useful stuff. When I drag my mouse around an item I don’t see a bounding box. How do I turn it on?
@apusista3 жыл бұрын
How about a video on WHAT to select to modify a given (not too complex but not a cube) shape like say a hexagonal 'cube' or a cube upon a cube...
@JamesRAZPTL Жыл бұрын
perfect
@mohammedqadir618710 ай бұрын
An important lesson
@Williscald3 жыл бұрын
LIKE - Just like you said... I'm self-taught, but didn't know the intricacies of the Select tool!
@sheryllaw88983 жыл бұрын
Thanks! Self-taught means not always knowing the tricks.
@fbenkautz26622 жыл бұрын
My selection tool jumps to a different view when used more than once. How do you clear it on a Mac?
@MrKen-wy5dk Жыл бұрын
Thanks for using a Mac. However, some type of circle around your mouse would make it a lot easier to keep up with where you are going with your mouse.
@ytronovogo2 жыл бұрын
Самое лучшее вдео пособие по обучению. Находишь много новых функций.
@famcivilengineer343 жыл бұрын
Back to Basics.. 😁 😁
@DianePeters-y9h2 күн бұрын
I'm thinking of purchasing SketchUP. I do drafting for a contractor who does general remodeling and kitchen and bath renovations. I do design as well as existing and proposed drawings. Will this program work better for me than 2020 which I am currently using?
@SketchUp2 күн бұрын
Better in which way? SketchUp is great for design, documentation and visualization. It has direct access to geo-location information (for accurate shadow studies) and 3D Warehouse for instant model entourage. The new Ambient Occlusion style really makes interior views, including black and white constuction documents pop.
@muznefatima58762 жыл бұрын
By making a window from left to right.. it doesn't get selected... stuck 😣
@taylorbad3 жыл бұрын
On the modify key section, you say SHIFT, but you display the SPACE bar in the video.
@reality150tv3 жыл бұрын
Is there a free download? i cant find it
@jorgeconcheyro3 жыл бұрын
only the web version is free, I think. app.sketchup.com/app?hl=en
@aiboffin2953 жыл бұрын
Aghh, This is as boring as f… oh, you can hold down alt and shift just to deselect, that’s cool.