Impact Driver Showdown ~ 8 Models Go Head-to-Head

✅ Bosch GDX 18 V-EC - amzn.to/3fJyFNw
✅ Dewalt DCF887 - amzn.to/33JAwzC
✅ HiKOKI WH18DBDL - amzn.to/3gHxnUB
✅ Hilti SID 4-A22 - amzn.to/3kwilTJ
✅ Makita DTD170 - amzn.to/2Ds2UeU
✅ Metabo SSW 18 LTX 400 Impact wrench - amzn.to/2DAc8FO
✅ Milwaukee M18 FQID - amzn.to/2PEaO7b
✅ Panasonic EY75A7 - amzn.to/3krDrCT
So this is it, our updated impact driver comparison test of the big players in the arena. We first published this video on 9th February 2018 but decided to extend the testing after your feedback so here is the original video with a few extra bits.
Watch Roger Bisby take drivers from Bosch, Dewalt, Hitachi, Hilti, Makita, Metabo, Milwaukee and Panasonic to see which one has the power and features of a champion. We also measure the sound level of these noisy machines.
Impact driver vs impact wrench review - Does the Metabo impact wrench with 400Nm of torque have more grunt than the less powerful 205Nm Dewalt DCF887?
The full reviews of each impact driver are listed below.
🎬 Bosch GDX 18 V-EC - • Bosch GDR & GDX 18v Im...
🎬 Dewalt DCF887 - • DeWalt DCF887 Impact D...
🎬 Hitachi WH18DBDL - • HiKOKI WH18DBDL2 Impac...
🎬 Hilti SID 4-A22 - • Hilti SID 4-A22 Impact...
🎬 Makita DTS141 & DTD170 - • Makita DTD170 & DTS141...
🎬 Metabo SSW 18 LTX 400 Impact wrench - • Metabo SSW 18 LTX 400 ...
🎬 Milwaukee M18 FQID - • Milwaukee Surge Impact...
🎬 Panasonic EY75A7 - • Panasonic EY75A7 18v I...
Owners of the Dewalt impact driver will be happy to watch this video. If you've invested in a Panasonic EY75A7 or Bosch impact driver you might want to watch another video!
===================================================
#ImpactDrivers #ToolReviews #SkillBuilderShowdown
🌲 Skill Builder Link Tree: linktr.ee/skil...
👍 Tell us what you like: skill-builder.u...
📪 Ask Skill Builder: skill-builder.u...
📣 Facebook: / skillbuilderchannel
📷 Instagram: / skill_builder
🛒 As an Amazon Associate, we earn from qualifying purchases
🎬 All videos: www.youtube.co...
💧 We support Charity Water: www.charitywat...
💰 Bitcoin donations: 3J2mHmK3J94v6Xo2jbG3mdruWvSq5LVNyu
Out of respect to our channel sponsors and the wide variety of people who watch our videos,
we will remove comments that do not follow common standards of politeness and decency.

[@tonicharlesworth5579]

This is my 2 year olds favourite video. He is obsessed by impact drivers. He is also showing an interest in right angle drills. He knows all the brands

[@histguy101]

Jeez, tradies starting early these days

[@paultasker9759]

Awesome, It’s a good thing for a boy to be into!!

[@zachyatt8046]

😂Lmfaoooo, you gotta bright future kid

[@dr6124]

Buy him a ball or something

[@ProstetnicVogonJeltz]

Far and away the best Impact Driver "shootout" I've seen. No fluffery, no showmanship guff... just straight talking, and giving each driver what looked like a fair crack. I was interested in the DeWalt before watching. Now I'm buying the DeWalt! Like some of the other commentors, for a Grand Finale I would have liked to have seen the DeWalt finish out the screws that never got to 100%. If you still have that block of oak around, how about making that quick video?

[@filipek7553]

Check Project Farm. Your mind would blow

[@baptiste_boo]

I do love my Makita set, I used to be DeWalt, it aged like fine wine! Decided to try out Makita, best investment yet! Treated myself to a impact driver, drill, jigsaw and a circular saw.

[@luke9299]

I found a Makita impact that had been left on a building roof for 10+ years.. it had clearly seen lots of wether (Rust all over) and sure enough it worked I didn’t even have to get a new battery. The only thing I had to do was un seize the chuck and I’m still using it to this day!

[@mcdo8975]

and didn't even need charging ever since XD

[@sodd1000]

I found a makita brushless drill in a skip 2 months ago. Full of plasterboard dust. I stripped it and cleaned it and it works and I am also using it. It now is my go to drill as it is my lightest. I haven't had to charge it once since.

[@visl7146]

Makitas are crap,no strength despite are same torque with some DeWalt. Not enough speed,not energy sufficient,not powerful. Gears inside like made of brass. So many models you don't know what is what,only to make noise.

[@MrIcewing]

I would have loved if you used the Dewalt to drive the rest in, just to show that the wood was not "hard" or anything else was wrong.

[@busaj383]

MrIcewing Heck yah!!! That would have been a great test for that Dealt. Would go out and buy the D after that no matter which other brand I already owned 😉

[@patdud1979]

If he still has that piece of wood with those same screw in it then you could do that in a quick update video👍

[@NOBOX7]

Lol , why are people not willing to see the truth ?Dewalt rules because its there goal to rule , there batteris are better also ,

[@keatontempesta6963]

Proud to say I have a dewalt

[@hermanthenz21]

I'm agree with u, he need to screw all part of that wood to prove.

[@demonhuntermoonwolf244]

I have been running the same exact Bosch Impact as you are reviewing and I’m beyond impressed by it. Had many other brands and nothing that I have ever owned comes close to its sheer capabilities and sheer power.

[@NOZZASLOADEDED]

Apprentice had this Bosch impact driver, we thought it was good for a while too. He dropped it off a ladder, maybe 1.5-2m high and it snapped on the handle near the battery... Having run Milwaukee and DeWalt, we were super unimpressed by the structural strength of the Bosch.

[@colin-manyeates-clan5221]

Ummm according to this test Bosch is the worst... so not sure why yours is so much better??? @19.11 min

[@autonomous44]

I’m glad you are mentioning material consistency. I watch a lot of tool duel videos and such but i am always thinking not only about consistency in material, but also with consistency between operators and left or right hand etc. the way screws in wood can effect the surrounding wood and so on. I think you guys on KZbin need to use plexiglass or hard plastic, something man made like those materials, something that doesn’t have such variation as wood and not porous like concrete.

[@SnarlingDog]

Based on this, I went and bought the DeWalt. Absolutely blown away by its power and battery life. How did I manage before?

[@michaelandcolinspop]

@Bob Cooper I got one of Dewalt’s right angle drills on the 20v XR5 platform for some deck work. Holy crap, that thing will run a spade bit through a treated 4x4 like nothing is there. My son kept pestering me to drill a hole so I gave him a shot. It almost threw him like a sack of potatoes.

[@wellbeing4541]

Appicon a Dewalt is never too much

[@liamjones246]

Appicon Bosch 4pc kit would be your best choice for value and power considering you’ll need a hammer drill for brick

[@BayAreaMCs]

I’m a commercial carpenter and the 20v max xr impact is essentially my right hand. I’ve dropped it from five stories up and it still worked fine didn’t break anything on the tool itself just bent the crap out of the shaft I was using and battery was a little lose but that’s it. Between shear power and toughness alone, I wouldn’t buy anything else

[@Baksan_Dog1988]

Appicon grab the 887 with the 3 speed perfect all rounder.

[@mickleblade]

I'm mighty impressed with the makita impact driver I bought 5 yrs ago. Also did an accidental drop test, 2.5m straight down onto concrete.... the battery popped off, it's still fine.

[@raymondgriffith6532]

I've seen many of these test and every time they show different results.

[@wallyknew]

had a Bosch for years, it's been hammered and is as good as it was when I first got it. I do a lot of unistrut construction. Used it recently to put 25mm woodbits through timber. It changed my working life.

[@motsigman]

had at least four of these, Makita every time for me

[@Gravertrain]

Last test should have been a follow up with the Dewalt on all the screws that weren't driven in all the way. Bet the Dewalt company would have liked to have seen that. Thanks for the review. I'm going with the Dewalt.

[@chud1290]

Gravertrain Graveytrain then why the comment if you made up your mind before watching anything opposing your mind?

[@SuperJohn12354]

The Milwaukee wasn’t set on max look at the lights

[@jasonlloyd9495]

SY the dewalt would not have drove it all the way in where the makita was wood there is a hell of a lot harder where it’s dark at if u have ever split wood you will know this and I have split mine and everyone else’s share in my life

[@AATreeService]

You’re right it wasn’t set in max. Sadly this guy is so rammy he doesn’t even pay attention to what he’s doing. lol lol lol plus if you would have finished the rest of the screws with the DeWalt, it would have been junk

[@TheWaxChainFanClub]

"It likes the one position... I know other people like that..." good on you, Roger!

[@JMackyD18]

Lol

[@macduff1964a]

Lmfao 🤣

[@priestleyharker4046]

I know one thing. My makita is 6 years old and still going strong. I'm a Carpenter and have put it through the ringer. Now it's not as powerful as some of the other brands but not less enough to make a difference. Driving screws is one thing but i want my tools to last and these tests can't show that. I've seen them all come on the job and go but my makita impact driver is still going hard. I think thats far more important

[@billydarley6925]

time and money i suppose. money saved on tools without any major difference in time to complete a job.

[@lou3824]

Pretty much the same for me with the makita. I've been using mine, without any trouble at all, for years. I've seen dozens of guys show up with new impacts on jobsites only to be replaced by something else fairly quick. Dewalt is known to work great when new, but they seem to develop the most problems too. I'll take the reliability of the Makita...

[@moysesgaray8410]

I love my Makita but the other day I was using it to drive screws into drywall and it started smoking on me which is the reason why I even started watching this video. I'm so surprised and was shocked to see that happened but I always really loved my Makita and am taking second thoughts about it. Was it the Makita or would they all have done the same thing? I gave it a rest and it still worked fine after but my heart dropped when I noticed that happening!

[@priestleyharker4046]

@@moysesgaray8410 I've put mine through hell and never had an issue. I think yours may have just been a rare case. As long as it was the trade quality makita not the generic DIY. Their trade tools are awesome.

[@priestleyharker4046]

@Jay Bee the tafe i went to to get my trade used dewalt, they had a deal with the company. My teachers and the students hated them. They were always getting replaced or broken. A lot of us used our own tools instead as they were no good. They may be better these days but it will take a long time for me to forget that. I don't care about the minor power bonus or battery life. I care about reliability and longevity

[@joycinhaborges2618]

Got hit in the head with an impact driver. Fell off my damn shelf, was just sitting there and suddenly Bosch!

[@kamryn7496]

Did it knock some sense into u?

[@karmalife9369]

😂😂😂😂

[@MrRichard57000]

did it get the screw in all the way?

[@ironore1000]

Ur such a tool👏

[@Bloggingidiot]

I loved Bradley Walsh on the Chase but he excels presenting this.

[@malcolmoxley1274]

what would have been nice to see was the 100 per centers finish the screws the others left, just in case they hit a knot or metal (you never know enough metal was fired around the wars}

[@garethbaus5471]

Interesting point.

[@JeffreyWillis800]

Need a Part 2.

[@stacyharper4287]

Yeah Dewault!!! Little disappointed in Hilti and Makita right now

[@Jay-ip4jn]

Owned 3 dewalt drill in my life all have failed within 6months to a year. I have had a Milwaukee brushless now for almost 2 years it's still working almost like day 1.

[@nathancook5271]

Milwaukee is a very good tool!!

[@fakenews4734]

Wow nice anecdotal info. I've had several Milwaukee's fail within 3 weeks, but I've had the same DeWalts since the 50s.

[@nic_the_aged_woodworker]

When I was working as a kitchen fitter I loved my 10.8v DeWalt, enough grunt to do everything unwanted plus light weight so no tired arms. My original 14v DeWalt, now 15 years old are still going strong, though I am on a new set of batteries

[@bamagolds]

I have a Makita impact for at least 2 years now. It has done all my jobs well so far. I would like to have adjustable torque because some jobs, its too much and it is very loud. I have Dewalt 20V batteries, so I I bought the Dewalt DCF887 new on eBay for $80. We'll see how it holds up.

[@mykemajewski6371]

I have a hard time believing Bosch did that bad. I actually switched to Bosch from my dewalt set I had. And in my personal experience the Bosch out preformed dewalt. The 4ah battery for Bosch lasted twice as long as the dewalt 5ah battery as well. Side note, after 3 years both of the Bosch batteries are as strong as the day I bought them. My coworker has replaced 4 batteries since that time. Food for thought.

[@shockwavemikey64]

It is indeed to the old 18650 batteries they used. The new procore 21700 are absolute monsters. I drive 8" timberlok lag screws into oak rough boards to tie in the new replaced wall section to the old frame and my freak drove one through the timber board. The threads of the timberlok were protruding from the rough lumber. It was a no, no, but I wanted to know.

[@shockwavemikey64]

I routinely drive the 6" grk rss screws and the freak just won't stop driving them until I release the trigger.

[@jimbrown2495]

I have every ty0e of battery they have released, including the wireless charging and I have never had one go down. Some are over a decade old and I am a general contractor in Northern Canada. Very good tools in difficult circumstances, that's why I keep buying them

[@thebitefight2601]

Same hated my dewalts got Bosch for the same reason better batteries and the tools do not die my two employees have dewalt and Milwaukee and they have to have 2x the batteries to finish the work day, depends on what we are hammering in depends on what ones better I can drive in tapcons they can’t but theirs perform better in wood, that also have had to replace theirs and I have not so to each his own.

[@redrhino3041]

As a carpenter working with hard Australian timbers, I’ve burnt out makita Panasonic, Milwaukee and the latest dewalt impact driver, at moment I use a Hilti and it’s light and powerful. Note thou Milwaukee is brushless and red lithium and lasted 6 months The panosonic lasted a year Dewalt lasted two years Makita has for 4 years never died but the batteries just stop working randomly. Now Hilti is a year in no issues but it’s early days

[@stenhouse8569]

Would like to see workzone/Parkside power tools reviewed next to these

[@avancalledrupert5130]

Everything makita feels like it grew in your hand. That for me is enough. Every now and then a brand outperforms them in a certain way on a certain product. But then the year after they allways drop something to top that. Never break just a joy to use.

[@colskidfarmac]

Hilti impact is the driver I use daily. Had the makita and the battery didnt have the staying strength, dewalt I found was temperamental. Although I used to be a makita die hard and they used to fill my van.. ...just found hilti tools are more durable. Vids are great 👍

[@zsozso411]

I’ve been using dewalt impact driver for many years at work, it never let me down

[@gjjakobsen]

Given the inconsistent density of wood from spot to spot, it may be nice to drive fasteners through something else next time. Perhaps 6 or 8 engineered deck boards sandwiched together? It would also be interesting to take the highest torque DeWalt and finish the rest of those lag screws that the others failed to drive. Thanks for posting a most interesting match up. Looking forward to more. Cheers!

[@nobotshere8364]

Having subsequently watched this and unsure whether to go Dewalt, Bosch or Makita I’m well happy I went Dewalt ... :)

[@galvanizedgnome]

You should have gone with Mafell

[@storegga]

Surely the wood especially oak has different density depending where about in the grain you're drilling too.

[@Wavelover33]

I’m a carpenter - Makita for me. Reliable/ergonomical/good batteries/range of quality tools. -30 to 40 , rain and snow. Makita/dewalt and Milwaukee are basically any tradesmans choice of tools. Plumbers like ridgid.

[@neilrobinson640]

Old video I know but still worth a comment, I use the dewalt 887 and it’s a great tool, well balanced with the best grip in my opinion, but driving 180mm timber coach screws it struggles after 3 or 4, not surprising as it’s not built for that sort of graft, so I have got the metabo 400 1/2” wrench and a 1/2” - 1/4” Adapter and it drives all day no issue, not as comfortable as the dewalt but for proper heavy duty the metabo is a winner

[@ronaljimenez820]

I can't believe bosch be the last I got bosch tool from 11 years I got and the old battery still working

[@thebitefight2601]

I find it odd my two year old Bosch impact has been out preforming the counterparts on job sites running in tap cons and I’m the only one that’s yet to replace mine.

[@SkillBuilder]

I have been talking to an engineer friend of mine who has offered up a theory on why the fluid drives performed so well in this test and punched well above their weight. He says that there is a certain amount of torsion in the bolts and the longer they are the more this is the case. If you hit the head you get twisting along the shank and that doesn't produce as much movement in the thread as a more sustained pushing action. Paradoxically the extra energy is, almost, counterproductive unless it is enough to produce the torsion, and some, which is what the DeWalt and Metabo did. He went on to say that there is the torsion moment of inertia and the polar moment. I don't pretend to understand this but I like the idea that sometimes the little guy wins the fight. Cleary all these bolts are struggling at the point where they run out of thread. As I said the force to overcome this is huge and we did snap the head of a bolt trying to drive it further with the DeWalt. Why did the video editor drop that clip?

[@evanarachikavitz6819]

this is the idea behind the newer impact "flex bits"

[@upas81]

Hi was right. Thats why its not good compare fastest mode. Because its diffrent torque. Same with drill there are 2speeds 1 for 70nM 2 for 50nm. Speed 2less torque but faster work. When you use blue. Mode. Its possible that its more speed and less torque. Ned to see in manual. What speed on what torque working.

[@SkillBuilder]

The way an impact driver works is that the faster the hammer hits the anvil in rotation the more torque you get. It is like hitting a spanner with a hammer to tighten a nut. A drill works in a completely different way and the torque is in the gearbox and motor combination.

[@SkillBuilder]

Interesting. I will give then a try and see what happens

[@upas81]

What are you saying ok. Thats what told to us its true. But i got on my own with that. Many times. I will tel l you when its filed. Take screw driver with 70nm. Torque. And impact 180nm. Then drill in to concrete hole 5.5 and use screws (special screw drill straight to concrete)with T20 or T25 head. 20 cm long. You will see how torque 180 nm cant move screw in to concrete. And screw driver can do it with 50 nm. In my view point as more faster impact realise power, the les torque it reaching to turn screw. To understand that use Ridgid oil Pulse impact. You will feel the diferent on your hand. Impact just hamering. Oil pulse more turning. www.familyhandyman.com/masonry/concrete-repair/drilling-concrete-and-installing-fasteners/view-all/

[@thebitefight2601]

On the job site we have a few brands and everyone has fell in love with the Bosch hands down after using it for a few days it’s flat out the best.

[@flyrc88]

Been running 12v Dewalt for 13 years no problem. For me modulation is the true test of an Impact driver. How slow can it go without wrecking your screw head or work. They can all slam screws in rapidly but not all can do it slowly...

[@danielholdsworth2121]

The best thing about this presentation is that we are told very quickly at the beginning which one is coming out on top so you don't have to watch the whole thing if you don't want to, but I did.

[@rudolfrednose7351]

I’m a DeWalt user myself, although I had tools of most brands through the years. What I noticed with DeWalt though is that the housing has a tendency to split lenghtwise.

[@rudolfrednose7351]

Maybe they are too strong for their own good?

[@canadiantoque229]

I am a mill wright and i have had the same thing happen in my exp i find milwaukee m18 line to last the longest for me

[@RCTPatriot75]

I've had several Dewalt housings crack

[@user-yl4gs6he3o]

@@rudolfrednose7351 kam auf den Boden

[@AATreeService]

I sure with ya there. My company has roughly 500 Milwaukee tools. Not only do they last through major abuse but they always stand behind warranty. We had DeWalt, not a chance do they last as long. I’m not talking alot a couple tools U guys have have in your garage. I’m talking hundreds and hundred for years and years

[@thebuff7271]

I've also watched the Dewalt 887 catch fire on VCG tool Test Raw

[@suazzz3070]

I worked construction all my life and for price and performance and I love Milwaukee

[@trentcunningham5627]

My. DeWalt set was stolen and I needed a new one. I went to the local lumber yard and hardware store. They had a sale going on the Milwaukee still set so I went ahead and bought it. I'm glad I did because now I won't buy anything but Milwaukee....

[@kylehardman9135]

@@trentcunningham5627 Ryobi is now made by Milwaukee and really isn't bad for cost

[@jamarjackson5367]

Dewalt is all I buy ... Never let's me down and they make durable tools that can take a beating

[@richardmarsh1332]

Whistle this comparison was great, I found myself wondering if certain area's of that oak timber might have been a lot tougher to get through than others. Once the screws stalled with the weaker models it would have been a real clincher at the end to have gone back with say the Dewalt to see if it powered the screw up to the hilt with ease. Well done Roger.

[@catmonkey6826]

Yeah it's bol**cks really, you hit a knot you're going no where with anything of that size.

[@catmonkey6826]

Try that Hitachi back near the first area. What a croc!

[@jodyswallow1008]

Ask any reasonably competent chippy and they will tell you wood has all sorts of qwerks, knots and soft spots. Good question.

[@johnf3326]

I have 4 classic Honda motorbikes and couldn't get some screws out. My mate came with his impact drill and got them out no problem. I decided to get the cheapest one I could, £40 from Wickes. Its one of the best tools I ever purchased. Gets screws in and out so much easier and better than with a screwdriver or drill and bit. Good too stuck nuts with adapter.

[@tilerman]

Expect to be shot down a bit but here goes! 12 years ago my van got broken into and all tools gone. I was really short of cash and needed some power tools so i could work. I went and got an Erbauer impact driver from Screwfix. That tool is still going strong and still piles the screws in almost daily. Batteries still perfect and i can feel no wear at all on the tool itself. Yes its heavy and mine looks like its been though 3 world war's but i just cannot knock it.

[@BigAl4244]

Milwaukee should have been on par with Dewalt if you used the model that competes with the dewalt brushless impact drivers such as the 887. I'm a dewalt guy and I know Milwaukee is pretty Damn good.

[@robert.jennings-young5069]

It would have been interesting to see if any of the drills that completed the task would also have driven in those that failed, this would also show whether that spot had a knot or other obstruction.

[@catmonkey6826]

Absolutely

[@nunyabidnesss]

A couple seconds of speed or a hair extra power is nice and all, but you have to balance it against noise, feel, and battery efficiency. And when it comes to those, the Makita oil drive is the clear choice. It's feather light, it's super quiet, it lasts forever, and the battery efficiency can't be beat

[@shadowhunter9713]

It's the platform you run and personal preference that matters most of all. I run a surge because I like how quiet it is. Installed rear supports for drawer slides in a narrow cabinet yesterday and there was no harsh noise echoing to my ears. Not a big deal if you don't use one all the time though. But I do.

[@dragogranic8171]

you could drive those screws that hitachi couldn't with dewalt just to show how much more power dewalt has

[@bondarkenergy]

My thoughts exactly

[@WeldingForJesus]

Watching this with automated subtitles is just hilarious: "Where's my penguins?" "That's the meal walking" 🤣

[@archechme]

9:38 - "on the side they give you the sex group"

[@WeldingForJesus]

@@archechme Now THAT is a good salespitch!

[@StagArmslower]

I never had use for an impact driver; I usually broke the screws with it so I prefer regular drill. Even 3/8" impact wrench is more effective on tight bolts and nuts when working on the car. Still I bought 1/2" Ridgit impact wrench with brushless motor. In wood anything should work unless you are in construction business

[@superiorbeing95]

If my normal impact was struggling like this I switch to my bigger M18 1/2" with a hex adapter and it would drive all these fixings in like they were drywall screws and push them 1/2" below the surface with ease.

[@annespacedroid]

Now, just in case we're hitting something.... I'll drive it in with the Dewalt!!!

[@jubei20111]

The Dewalt was like: "Hey, why did you stop me? I was just getting started.".

[@spark20]

Panasonic: "Heyyyy, wait up fellas! Come on, it's not funny."

[@nguyent2477]

Makita" heyyyy.....hey...very very 👍....hey...hey...👍" Accept all of it , Makita is not tired of anyone !!!👊👊👊

[@euandykes]

The Bosch Pro tools are quite affordable here in Germany. They were the first to offer battery vaxes. I have an older model impact driver. The quick release mech has jammed many times. I was planning to expand further into this brand. Now I’m not so sure.

[@zachm745]

My contractor has been in construction for 35 years and he always goes with, Milwaukee. I really do like the battery meter on the Milwaukee’s

[@flhusa1]

i think you do a fair job on testing. as you know hindsight is 20/20. i would like to add something that my uncle told me years ago when i was asking his MASTER CARPENTER ADVICE on a repair project. he told told me TWO HEADS ARE BETTER THAN ONE EVEN IF IF IT'S LETTUCE. input is input no matter who or where it comes from. keep the videos coming so we all can learn something.

[@geoh7777]

It is easy to see that where the wood is marked "BOS," the oak has darker and denser figure. 15:03 The screw being driven by the Hitachi quickly swings over to an inclined angle, seeming to avoid denser, to seek weaker wood. Also, the "blowback" 15:27 is suspicious, both because it implies a denser wood that doesn't allow compressed gases (e.g. air, water vapor) to penetrate into the wood away from the hole, and that hole was the only hole to display that behavior (of the holes where the screw was backed out). It is clear that the idea that a long chunk of oak will not have widely varying local properties is not tenable.

[@AstonColey]

A better test would be to use a dial torque wrench and you would see the torque reading on the gauge. Trouble is with the oak it can be a different consistencies along its length.

[@johnriggs4929]

When I started work, it would have been a handrill for a pilot and a 131 Yankee (yes, showing my age, I know.) Things are so much better now. When you think of the power required to drive a 5" screw into solid oak, with no pilot - that DeWalt is impressive, no doubt about it.

[@louisfkoorts5590]

Goodness!!! My little 9.6volt AEG drill/driver of about 15 years ago would snap bolts, rather than "give up"! I just am amazed at these weak results in general!

[@Anthony_Spilotro]

Lmao!!

[@teknicol]

Just to prove the area around the Bosch and Makita had no knots the Dewalt should have proved it could drive the unfinished screws into the wood, but that simple proof was not done? Why not?

[@innatelyacidic6988]

I wondered the same thing

[@bdlit7165]

I'm planning to get my first set of professional cordless tools. That's my reason to watch. Thank you

[@JayKay-ht8rg]

6:16 “So? Why are we testing ‘em..??” “We’re testing em COZ WE LOVE TESTING TOOLS!” Lol!! Perfect answer!!

[@scroopynooperz9051]

You're supposed to test sh!t xD otherwise all you have to go on is the marketing BS of a company that is benefiting from selling you something. Independent testing is very necessary

[@JayKay-ht8rg]

@@scroopynooperz9051 of course. I completely agree. Plus the bonus of getting to buy more tools! Tools to a bloke is like make up to a woman! Lol

[@jasongavinbartram]

I've got all Milwaukee the 18v combi drill is an absolute beast, impact is great, I personally think they are the best that or hilti

[@davesheppard8797]

I have both....The Hilti is a dream. Not as powerful as my Gen3 but it is a beautiful machine!

[@jerrycipro4046]

Just bought a huge set of DeWalt FlexVolt 60v tools. Got the cordless mitre saw, reciprocating saw and dremal/ skill saw. Honestly the flex volt 60’s are godly. They shift power down automatically on the huge batteries so you can use the huge 60 volt batteries on the 20 volt dewalt cordless drills. I swear putting one of the huge 60 volt batteries on the dewalt impact makes it even a bit stronger.

[@TheBlaert]

Tbh all these will do a job. I have the Hilti and Milwaukee and never had any problems. Mostly automotive work

[@marnoi8754]

You wanna hear a joke? Panasonic power tools

[@thechad7803]

Mar NOi They’re like 3 times the price of the others also. Don’t have any idea how they sale any of them

[@Dimalf]

No Ingersoll Rand either, they have 20v max line too

[@jpk2742]

The impact Panasonic is brilliant I will never get rid of mine! It’s about 5 years old and I still beat everyone on site with speed.

[@MadMetalShop]

@@jpk2742 the video shows otherwise bud.

[@jpk2742]

MadMetalManiac74 maybe it does but we only did screw in tests which mine beat them all. I don’t really use impacts anymore though. Festool is the only way.

[@karenakarena1431]

Milwaukee all the way, I only use *Milwaukee* and it has never let me down

[@thomaslongoria439]

Only exception for me is the dewalt flex volt hole hawg. Everything else is milwaukee. Ive owned cordless milwaukee hole hawgs and went through 2 before the dewalt

[@1seriousgearheadify]

My wife likes her Milwaukee but I'm sick of fixing them

[@enobilam]

PENTING..!!! setiap cm pada satu batang kayu mempunyai tingkat kekerasan & kelembutan yang berbeda walaupun dalam satu batang kayu yang sama dari pohon yang sama.. contoh : 1. pangkal tunas pohon (kami biasa menebutnya dengan nama mata kayu) pasti lebih lebih keras, dan bagian yang lebih jauh dari pangkal tunas pohon akan semakin lembut, semakin jauh dari pangkal tunas kayu akan semakin lembut dan begitu pula sebaliknya. 2. warna kayu yang gelap biasanya lebih keras dari warna kayu yang terang, itu karena warna kayu yang gelap memiliki umur yang lebih tua, dan begitu pula sebaliknya, hal ini biasa ditemui pada satu batang kayu yang sama. sebaiknya tes dilakukan pada media lain seperti beton, plat besi... (jika test dilakukan pada kayu sebaiknya dilakukan pada kayu lapis/triplek)

[@jedics1]

Sitting here looking at my Dewalt DCD785-XE that I have given an absolute beating on and off over the last 5 years drilling steel, 6mm alloy and using 50mm hole saws sometimes as well. It did it all with the two 1.5ah batteries and charger that came with it and only just recently is one of the batteries starting to have a short life. I wouldn't even bother getting the bigger batteries as they last plenty long enough and the other one will be charged long before the one your using runs out. Its pretty small and light and I could not possibly ask for more from a $300 kit. Unless your using it for a full time job no one will need more.

[@sniperlif3]

Where is the Ryobi brand? I almost always see it in the top 5 for electric tools, especially impacts. Just curious.

[@waynemongo]

Ryobi don't seem to market to the trade in the UK very much. They go for the DIY market more so you don't see them on site much. Nice cordless tools though...

[@Lyndalewinder]

Ryobi and Milwauke are made by the same company and in my opinion Ryobi are on a par with many of these other so called pro tools - certainly better than Bosch!

[@azael831]

Looks: Hilti Balls: Dewalt Comfort: Makita

[@captainoblivionthicc1004]

Azael Pulido Quality and endurance: Makita

[@betareybill9400]

BEST Overall: Milwaukee (cause she's sexy and she knows it 😎)

[@leehowson440]

Why did the chicken cross the road? So Roger could put stockings on its legs 😂

[@mirialla3743]

I just sold 1 week ago my bosch machines and I bought Dewalt And I am very happy with the DEWALT is the best for me.

[@maicolx7776]

I ve have seen pirate/copy DeWalt in a normal tool shop! Wont buy any DW anymore.

[@fernandoullaguari9073]

My wife loves my tool no matter how slow it works as long as it gets the job done

[@antonios4926]

Haaaa nice one

[@laionemeihetahikoulakanate9515]

I use Hitachi on metal steel and it work perfectly.

[@DarkFilmDirector]

Hitachi aka Metabo HPT is perfectly good tool brand.

[@niceguy6837]

Ya good but not DeWalt

[@dodgeysolenoid5567]

Could you try the drivers that past, on the screws that failed to be driven in? Just to check that those screws haven't hit any area of high resistance.

[@stastsimmerman2878]

From my point of view, this first and single excellent review with real results and differences between Impact Drivers. First of all thank you very much! Second thing... very interested what realy happened with Impact Drivers on the market now... becouse this review is 2 years old... I am realy will be happy to see new tested results with new modelst of this year...

[@Im_D_Day]

The Milwaukee M18 FID, is automatically delivered with a 5amp or in 0-version. In this video he's using 4am for Milwaukee and 5am for other brands. Losing a bit newton and changing the result of real facts. I tried it by myself and it change the results. Milwaukee was faster and more powerfull. Give the right information to the people.

[@martylucas8557]

Dylan, not only that, but he had the Surge compete against the other standard impact (except for Makita that really sucked) drivers. The Milwaukee Gen 3 Impact should’ve been chosen to compete. It would’ve smoked the competition. As it was I was surprised at how well the Surge did against the other brands. They just didn’t want the Milwaukee to take 1st again...lol!

[@davesheppard8797]

@@martylucas8557 I own the Gen3 Milwaukee. Really crap tool. Like all my other Milwaukee gear, it works when it feels like it.

[@dennisw8166]

Bosch makes really good tools...except for their impact drivers.

[@Spookytooth92]

They made the only hammer drill worth anything......since then Milwaukee and some haves one that look great I think they might be good. But not near the level of tried and tested. I know guys use there Bosch hammer drill chipping concrete daily and years/decades later those things run great still. I like red stuff. But always gonna prefer that one box to be blue. Bosch hammer drill. It's the one

[@JackDaniels-up5wn]

Spookytooth92 Agreed Dad still has his Bosch 36V NI-CD Hammer Drill and they’re still a beast, just slightly more weighty and less life on a charge. But truthfully I don’t think they make them like they use to.. It seems to be this compact design idiocy that has ruined Bosch.

[@GabriSantin92]

I have the Bosch impact driver tested in this video. For me the dual spindle is a game changer, working as a small engine mechanic. I can use 1/4 hex and 1/2 on the same impact, and this is great. It's not amazing as power, but for me is more than enough and very good indeed. It just depends on how you use it

[@prepperjonpnw6482]

I’ve been using the same DeWalt 18v Drill 10-12 hours a day 6 days a week since 2001 and it’s still going strong. Obviously that’s not constant hours but a lot of the time I would use it for 2 hours straight then do something else for a bit then back to using the drill. So that’s why all my other cordless tools are also DeWalt. I’d like to see some tests of Ryobi and Ridgid and One+ since they are more for homeowners Cheers mate

[@jodyswallow1008]

On site, I burnt out a brand new Bosch impact. Gaffer wasn’t best pleased! I wasn’t even going into solid oak, just stripping out a bathroom suite. The thing was smoking.

[@SkillBuilder]

I have done the same thing, I am not sure Bosch is the company it once was. Maybe too much Chinese in there.

[@carpenterjonathan]

Would of been nice to look at the build quality, ergonomics etc. I always look for quality when buying tools.

[@lengthmuldoon]

Thanks for adding the half inch drive metabo I've noticed half inch drive impact drivers are considerably cheaper than quarter inch drives even when you add in the cost of the adaptor so that's my option

[@Johnbro8]

Lucky for me, purchased the Dewalt before seeing this trial, (I did already have the18v drill, but needed an impact driver) I’m not disappointed with my purchase. Thanks for sharing Roger

[@stevethomas5849]

My impact driver is a Screwfix brand Erbauer and I had for it since 2016 still going strong. Droped countless times still going, hope havn't tempted fate.

[@justinchurch2366]

Oh lord...a Milwaukee surge????? Wrong impact compared to the rest. Shaking my head.

[@vojnikjna30]

Still performed very good

[@suazzz3070]

That's exactly what I said

[@damon4557]

Same for the Bosch, their 1/2" socket/impact drivers are terrible compared to the others in their range

[@williamhoudersheldt7076]

@121bham If your not sure what he is referring to then, WHY THE HELL DID YOU COMMENT!

[@davidurwin4499]

Did you try drilling in the same screw that was sticking out the most with the best impact driver, to give it a fare test, because the oak is harder and more dense in different areas of the length of the beam.

[@SkillBuilder]

We did try different parts of that oak, we're working on new tests and better methods David.

[@coolguysaswell]

I agree this opinion

[@SL-ev8jv]

What Iwas thinking too, the part where hitachi was driving looks especially hard from the color of the wood.

[@endgovernmentextremism]

I built a sizeable project with 4 and 6 inch deck screws and the DeWalt made them all feel like driving a 2 or 3 inch.

[@darrellelnor7789]

Also would like to say that if you’d have put the 5amp battery in then you’d have got different results because I notice a big difference in between the 4 amp and the 5amp on how much torque you get

[@Son_Of_Scotland]

Very impartial testing, much appreciated!

[@VLM03]

SHILL! 🤣

[@martylucas8557]

Angel of War, not really... had it really been an impartial test they would’ve picked the Milwaukee Gen 3 Impact to compete vs the Milwaukee Surge. Do you know why? Because the Surge is a hydraulic/pulse driver. It has substantially lower ROM’s and IPM’s the the Gen 3. It’s only because the Milwaukee Surge is an awesome tool that it was able to drive the screw through the oak, smoking the Makita hydraulic offering. But really the bottom line is that it wasn’t an apples to apples test.

[@diencohoachay]

Best Impact wrench 1200Nm kzbin.info/www/bejne/eIi2k4KHq8Slaq8

[@willwilliams2944]

Stack up a whole bunch of different materials. Ply, dry wall, concrete, aluminum, etc... and the longest bolts you could find. Just an idea.

[@kendaldueck5997]

Makita all day! I work on a small crew that has 3 makitas that are 8-10 years old! We don’t use them much anymore but they still work fine!

[@darrellelnor7789]

I myself have the non surge Milwaukee that’s about two years old and my son has the dewalt one you’ve tested and my Milwaukee walks all over the dewalt on the same jobs. Also my Milwaukee is quieter than some of the other lads who have got the same model.

[@Sorensenator86]

I've had a brushless dewalt impact for 5 years now and it's bullet proof.

[@mastermetalshredder]

Yep, I have a DW dcf-886 and it's insane. Been driving SDS and all kinds of stuff with it full time since mid 2015 and it still runs like a top

[@adspeakaboo8231]

Same I like to get mine out when all these wanna be chippys makitas dont do the job lol

[@zbeshears6945]

I’ve had a brush ryobi for at least 8. Still works great even after being left in 4-5 inches of water for a week while I was on my honeymoon. And her ryobi didn’t even make it into the test?...

[@dereklathe3230]

Well I can own a harbor freight cordless drill for years and it still works! But how much did I use it, and in what conditions would be the question along with what shape is it in now. And getting something wet don’t do mean much of anything in most circumstances! I’ve sold and worked as a rep for black and decker/ Dewalt and they are mostly junk! They are a stand back and follow company that sells mainly by marketing lies, even right on the box, and selling to bandwagon jumpers that like the color or there daddy told they were the best! I will say they put a lot more QC and development into their saws, and make a good. As in table saws, circular and miter saws. That’s the only thing that I’ve kept of anything dewalt. Oh and they make a decent corded grinder but not much to screw up on a grinder really. And have owned about every single cordless dewalt tool brush and brushless! And have had most of them apart.

[@mattjudd1239]

I've been on the Hitachi battery platform for a few years now and cannot fault them however it does appear that they are always claiming to be the 'best in class' yet never really performing in these tests! Seen a lot of negative comments about Hitachi of late and can't see how making big claims and not being able to match them will help the image! Shame as for the price they are good tools

[@alphaclean3364]

Matthew Judd Their battery jailers are pretty boss though. I'm not big on battery tools but I run Hitachi just cause of the nailers, and the triple hammer driver is pretty good too. Everything else I use corded tools in a mix of brands. Nobody makes the best of everything, unfortunately. Ok, maybe Hilti does.

[@smyteyouall8256]

I'm not sure the impact he's using isn't faulty. Only reason I say this is I've driven larger screws into hardwood with the triple hammer and although it didn't like it, it buried them.

[@ryantetai6696]

luke marcus-embleton i think he does not like hitachi i remember him saying hitachi sent him a drill that was not factory bet if it was a milwaukee or dewalt it wouldnt of been questioned

[@nawazishali9617]

can these battery tools used in drilling the wall of bricks. can they use only for single house where we may need once in three In three month time ? please guide me

[@SkillBuilder]

That is nonsense. We just did the test without fear of favour. I have no skin in the game. I have nothing against Hitachi, even though they are now deceased.

[@stevenarseneault1972]

I got that DeWalt DCD791 driver and a DCF887 impact for a christmas present. I think I'm going to like them a lot.

[@travispratt6327]

For constant material use something laminated, stacked plywood or subfloor for example

[@user-jw9dh6ut9x]

My milly has been through hell and back she’s still going strong!