Skillful Guy Rewinds High Voltage 7.5 KW Electric Motor

[@crabmansteve6844]

This is good and honest work, much respect to these men feeding their families.

[@pakistanfoodandhealth6805]

kzbin.info/www/bejne/lZyQq3p7gc-Xmq8

[@smokeskull]

Waiting for the kids to get out of diapers so dad can stay home and kids go to work

[@creationlabsinc.189]

@@smokeskull no truer words have been spoken. Something commenters from a first world country wouldn’t know anything about.

[@saugatadhikari3359]

@smoke skull not everyone have a fucking previledge to sit on their arse.

[@Ozarkwild]

Nothing is trash in a poor country. Anything can be made, repaired or fixed. Great job and much respect.

[@jeanmichel9207]

We still rewinding motor in USA it depends which motor we deal with most big motor like for press more the 40 kw are cost effective for rewinding and they get rewinded by professional they get tested for insulation with 1000 v insulation tester and balance of rotor also test of amp it come back like a new motor

[@redbaron9029]

It's the rich countries who under the guise of "green" creates the worst trash and cause irreplaceable damage to the eco-system. Take apple and tesla's disposable approach against repairing for example.

[@cyberlifepcs3722]

So with your logic everything should be trash in a rich country

[@Ozarkwild]

@@cyberlifepcs3722 And unfortunately, that statement is true of many things we discard

[@mahomv9824]

Excellent, just better every time the rewinding of the electric motor again, it is better to change the bearings as well

[@ismaelcastillo43]

At least grease and clean the insides

[@creationlabsinc.189]

Probably going back to the crappy conditions it came from.

[@johno9163]

Such amazing and skillful work with such simple tools (a socket welded to rebar..very inventive)

[@bashirbahmani5275]

Oj

[@marcelchaloupka]

Yeah I loved the socket on the rebar

[@creationlabsinc.189]

Don’t need top tech equipment when working on 2 and 3 phase motors. Super simple by design

[@АлександрКулаков-ф2г]

в таких условиях так работать надо отдать должное , особенно мне кольцо с камнем понравилась 💍👍😜

[@ТимурЗарипов-в3к]

У нас такие камни мужчины не носят.

[@ВиталийКуповых-н8ъ]

Тонкое себе

[@electrokicker]

I have learned this profession in Germany years ago. After 3 1/2 years you are a "Elektromaschinenbauer".

[@pakistanfoodandhealth6805]

kzbin.info/www/bejne/lZyQq3p7gc-Xmq8

[@ninosanchez8798]

Electro whatt??

[@hardyhazramy6761]

@@ninosanchez8798 electromachine engineer

[@nobuckle40]

She purrs like a kitten! It's neat to see how things get repaired. Thanks for posting.

[@Neon-807]

Вторая жизнь мотору, круто! Парень знает свое дело!

[@alexnadeev7661]

Молодцы! Всё могут! Настоящие профессионалы, ремесленники!

[@case1861]

вручную обмотку поменять на элетромоторе это нечто,вообще не думал что такое возможно,а индусы без сложной техники сделали это на раз два...

[@ДмитрийСеменов-у2ч]

@@case1861 там не так уж и сложно, без оборудования можно сделать, сам тоже перематывал :)

[@case1861]

@@ДмитрийСеменов-у2чдля тебя возможно это и не сложно но я вообще не представлял что такое можно сделать в гараже на коленке) там ведь нужно считать каждую спираль когда ещё делаешь обмотку и в каждой единице должно быть одинаковое количество колец проволоки,иначе будут перегрузки и он может перегореть.

[@case1861]

@@ДмитрийСеменов-у2ч интересно а вот так восстановленные электромоторы они надёжные или может перегорают через 7-8 меяцев или год?

[@ДмитрийСеменов-у2ч]

@@case1861 даже точно не знаю, смотря как эксплуатировать. Если будет сильная нагрузка на мотор идти и будет нагрев не слабый такой, то возможно такими темпами его на долго не хватит. В справочнике все есть, лишь бы только была проволока нужного сечения kzbin.info/www/bejne/nYPOpKulf79ngJo

[@youngjohn5076]

The labor cost for that in America would cost more then a brand new motor. Great work.

[@AliAli-iu5qg]

هذآ العمل في اى دولة

[@kylesenior]

Australia has a higher labour cost than the US and there are plenty of motor rewinding companies about.

[@ابوخليل-ب9ذ6ث]

@@AliAli-iu5qg اتوقع باكستان

[@aliali-sw9mm]

ماشاء الله تبارك الله اسال الله العظيم ان يرزقكم من فضله - تحياتي لك من بغداد

[@daunhijau991]

Aamiin

[@ShivaprasadDabholkar]

Great work. The skill of the people involved deserves to be appreciated

[@lloydtshare]

Lol what skill?

[@MisterGenie21]

At 9:30, the coolest Pakistani worker I have seen :D :D

[@Sam-to1zg]

13:02

[@pakistanfoodandhealth6805]

kzbin.info/www/bejne/lZyQq3p7gc-Xmq8

[@peantter]

He high AF he is smoking some strong shit

[@zaphodbogdan33]

@@peantter Yep, he looks like he's blasted

[@AMITKUMAR-nf8in]

How hardworking they are.. good job 👍

[@WowThings]

They are!

[@abderrahimramdi6078]

These people can make anything work, better than scraping !

[@pakistanfoodandhealth6805]

kzbin.info/www/bejne/lZyQq3p7gc-Xmq8

[@majie1018]

In third word countries, there’s nothing to scrap.

[@ЕвгенийЕвгеньевичЧичин]

Сам работал обмотчиком,двигун старый сделан с запасом провод вкладывается легко,пусть попробуют новый перемотать,умучиешься провод вкладывать всё впритык.

[@Mr_Flybacker]

у старых и индукция ниже

[@АндерсБеринг]

Стартер он автомобильный перематывал в протяжку,с руками мужик. И здесь под шаг делал,не пофазно,как у нас в ЭРЦ.

[@MarshalJose1]

Great video. Thank you for showing it working at the end

[@chem525]

I'd never hit the end of any shaft with a hammer. A great way to disform the end and never get a pulley back on. They do such great work I'm surprised they don't place a block of wood on the end of the shift. Then smack it. Bearings got no love too!

[@musoangelo]

Not to mention that the bearings weren't replaced. I mean in one way they are awesome and in another, lacking in basic engineering skills. I'm wondering how long their rebuild will run for?

[@LuisCastillo-gr3ok]

Excelente el travajo saludos desde panamá👍👏👏🙋‍♂️🇵🇦

[@glennmcgrath971]

Very talented people reusing materials that would end in land fill in west. Whenever i use big hammer on metal i use lump of wood to protect the metal.

[@oo0Spyder0oo]

It would end up in land fill because the greedy tradies charge too much to repair them.

[@nivdel]

Few resources and maximum skills. That what is needed to colonize Mars.

[@space_wanderer]

Я офигел от прибора для прозвонки - это феерично))))))

[@avoskin23]

Хлопаю в ладоши стоя у монитора, молодцы ребята

[@chiribas24]

Двигатель то Наш Российский по-любому

[@ZygmuntKiliszewski]

Once upon a time I wrote that the Indians are a great Nation. I admire them. They do their job precisely in difficult conditions. For this reason, I really enjoy watching their works. Congratulations to the electricians 😄.

[@aluminaterock660]

They are Pakistanis

[@ZygmuntKiliszewski]

Pakistan is also a big Nation. All Nations are equal and should live in harmony and mutual respect 👌.

[@pubgmtdm3951]

It’s Pakistan 🇵🇰

[@lloydtshare]

Ah yes the mains continuity tester one of my favourite

[@sergiocruz3061]

These men are very smart. Keep the good work. 👌

[@maheendrannair9557]

Work is workship. Sincere in their work. Congrats.

[@Michael_Michaels]

When the _skillful guy_ is composed by a team of plenty more!

[@aprintpcb]

very2 amazing skill ( english ),....benar2 keahlian yang menakjubkan ( indonsia )

[@scottduede8134]

That is fantastic. I've been dinking with motors similar to this... but substantially less mass and workload.

[@РаисХайруллов-д5щ]

Сколько видео не посмотрел, чтобы они не ремонтировали, без молотка ни разу не обошлись🙂

[@Sashke_74]

Кепарь чёткий !!! Респект)

[@miketurner5310]

Amazing skills and I’m sure he’s been self taught

[@felixcat9318]

It reminded me of when I was a kid, and I would pick up electrical bits and pieces that had been thrown out and I'd repair them and sell them. Back then there were repair shops too, whereas now it's a throw away society in the West.

[@TheNemosdaddy]

People rebuild these motors all over the west

[@cyberlifepcs3722]

Felix, I completely agreed with the throw away society instead of repairing them

[@Zahidalizahidi]

throw away means waste of resources

[@ОлегКоробкин-у7е]

Золотые руки, отличная работа!

[@uncontrollabledogs3791]

Nicely done. Would like to see more like this.👍

[@jayakeah]

Good skill manual 👍..i like it.my friend..iam from indonesia

[@mayodeonse5075]

I want to learn that skill..its always my dream..

[@bigcheese781]

@11:45 good bye bearings, the little longevity and durability you had...

[@Romych123]

Мне аж больно стало, когда он выбивал вал железным молотком.

[@АлександрБрагин-е8б]

И всё на полу , что за ремонтник ?

[@beautifulmadness37]

@@АлександрБрагин-е8б Это у них самобытность такая-все на корточках делать.

[@Sergey5870]

Кропотливый труд. Молодцы

[@hakimbarbatta8878]

я ем гамбургер

[@Blisy12345]

This is my Job in Germany. Nice work ;):

[@vladimerdarjania7157]

Very good work.

[@bikerbisht110]

Great workmanship .... very rare these days

[@moboutmen]

Most impressive.

[@augustebiz3176]

I like these industrious people.

[@josecruz-qq8sm]

Con simple herramientas, pero sobra talentos

[@leewithey2014]

Incredible talent!!!

[@ensign_Zadov]

Progress! Both the room and the people have become more tidy.

[@fahrrurrozi686]

Хорошо

[@keysbound937]

Freaks me out how he hits the casting with that hammer! Amazing skills though !

[@heatmyzer9]

And the shaft…ouch.

[@Unpopular_0pinion]

I thought the same thing

[@bigcheese781]

Yes, the people praising the workmanship and skill shown in this clip is clueless. If this man was under my watch, he wouldn't be by the end of the shift. Lack of basic skills and assembly care.

[@troth6251]

Bearings are a press fit, in this case they are a big hammer fit. The speed of the motor looked a bit slow about 200rpm.

[@tromptowers]

Always on the sidewalk with 100 scooters/minute honking past.

[@antoniosilva5933]

Legal bom trabalho. Achei legal não ter de usar verniz para travar os enrolamentos . Usou só barbante 👍👍

[@TheSwamppilot]

There is dignity in a job well done. There was a time in America when small repair shops for everything from toasters to TVs could be found around the corner. We became a throw-away society.

[@Umtree]

That thing deserves a fresh coat of paint and a polish.

[@hamidmahmodiroshan950]

عالی بود کلیپ هات قشنگ بازم ادامه بده👍

[@bullhippo9023]

Low temp solder is not okay, motors get hot and the solder melts. No varnish on the winding, the winding vibrates at frequency and moves from magnetic force, it will fail much faster not flipped. I guess they work with what they have ?

[@bharatbhatt3645]

Good job with simple tools

[@WowThings]

Yes they are

[@Voyager23B]

Great video! Thanks for posting!

[@chadpreston5549]

That man would make 500k a year opening a motor repair/rebuild SHOP in DFW excellent job!

[@aquaaqua4759]

Вроде сделал неплохо но мотать движок без пазовых клиньев и лаковой пропитки нельзя! Это золотое правило. Такой двигатель не долго проработает

[@ЕвгенийЕвгеньевичЧичин]

На коленке и не соблюдая технологии качества не будет

[@space_wanderer]

быстрее сгорит, быстрее принесут на ремонт )))

[@mohdsaif7747]

This is the real man👍👍

[@ebrahemalahmad369]

شغل جميل وراءع ..ولكن لماذا لايوجد متضدة للعمل بدل الجلوس على الارض .....😇😇😇

[@marcelchaloupka]

That’s real skill.

[@MrQuazar]

Надеюсь не забыли смазать вал и поменять подшипники?

[@ЁжикМедведов]

Мало того что он вал молотком разбил, он еще при установки передней крышки подшипник убил.

[@MrQuazar]

@@ЁжикМедведов однозначно им есть еще куда стремиться, съемники, подшипники сменные, произвести или закупить

[@ЁжикМедведов]

@@MrQuazar даа с их умением и усердием, они скоро подшипники будут сами производить,

[@velvv5387]

Какие ещё подшипники? Они обмотку лаком не пропитали, пыхнет она синим пламенем при нагрузке.

[@TheNemosdaddy]

I can only imagine how much actual electric motor companies cringe watching this. So many steps missed.

[@hc8714]

there is nothing to cringe about, if you really know the trade you probably realise what he did just work except for compliance which is really not important for a machine to work, or not.

[@Guillotines_For_Globalists]

What was missed?

[@johnjordanakajoejordanwhen2295]

Missed or not it works WITHOUT STUPID Gov. regulations and union involvement

[@TheNemosdaddy]

@@johnjordanakajoejordanwhen2295 both of which are needed or you end up like this poor ass guy. You people being anti regulations and anti union is such ignorance.

[@klausuhlig7141]

Only thing I found was him beating the end of the shaft with steel hammer and pounding it on the floor, but some how it pulled throug the bearing

[@kaustubhdahasahasra4921]

Bhot badhiya inse hum motor winding sikhna chahiye

[@abulaishansari7827]

Very good work and i like you

[@НелинейныйПовторитель]

Впервые увидел качественную работу)

[@vitttex]

Что там качественного?Даже лаком обмотку не покрыли

[@charliedebravo3960]

Excellent technician

[@CannonFodder873]

600 Volt/3 phase AC isn't "HIGH" voltage. 7500 watts @ 746 Watts/Horsepower = 10 Horsepower motor It isn't even MEDIUM voltage, by the way. 🙄

[@ghostinajar369]

Shout out to Michael Faraday sucking at glassmaking and for making all of this possible!

[@oo0Spyder0oo]

Yes, a real legend among pioneers.

[@revnitelj]

If they live in Europe each of them will have at least 2000$ monthly sallary. This is so respectfull job

[@pakistanfoodandhealth6805]

kzbin.info/www/bejne/lZyQq3p7gc-Xmq8

[@bigcheese781]

And the difference is, among others, in Europe the bearings aren't destroyed during assembly.

[@velvv5387]

Каменный век. Тихий ужас. Инструментов нет. Пропитки лаком нет. Проверки нет. Крышку забивают кувалдой без оправки - кранты подшипнику!!! Работать будет очень недолго и при нагрузке чуть выше номинальной обмотка сразу же сгорит. В большинстве комментов - "хорошая работа". Все безграмотные что ли? Мир катится в средневековье!!!

[@__Goodwin__]

10:39 думаешь маслом заправляет? )

[@velvv5387]

@@__Goodwin__ хз, но это не шеллак))

[@__Goodwin__]

@@velvv5387 ну какой есть, тем и заливают ), я думаю они ещё много вырезали, чтоб конкуренты не знали)

[@velvv5387]

@@__Goodwin__ двигатель полностью окунают в горячий шеллак. То что на видео - онанизм.

[@thebesthits532]

Well done bro.

[@airakeyn2086]

Молодцы ребята, вот только приобретите киянку, бить молотком по валу и корпусу - не есть хорошо.

[@СегейЛавров-п5ж]

Меня тоже кантузило, когда он по валу молотком стучать начал!

[@salahmaroc89]

عمال جيد يستحقون الإحترام عليه

[@hainguyenvlog3651]

copper wire winding technique is too good. Good luck.

[@WowThings]

Yes, thanks

[@wpower4343]

😂😂

[@abidinawangahmad6266]

Good job bro!

[@WowThings]

Thanks for the visit

[@mariotoro460]

Very good men.

[@jonsidds6963]

And over here guys be like oh yeah no can't be fixed gotta order another one.

[@brianfraneysr.5326]

A little machining of the rotor shaft is i order.

[@neerajrajpoot2545]

Thanks ji 👍

[@Umtree]

A few minor OH&S issues, but offer than that… great work

[@ec7888]

Excellent job!

[@MoparMan-ff8fb]

always grease the bearings and bearing surfaces after a rebuild . also check for flat spots on motor shaft

[@rollybarcelona4771]

Better replace both bearings for max life

[@otherfishing]

amazing work

[@WowThings]

Thanks for the visit

[@sheldonb2022]

XD the light was a worst loop sound they coverd

[@عبداللهابوايمن-ف6ج]

عن أبي هريرة رضي الله عنه قال: قال رسول الله -صلى الله عليه وسلم-: «سبق المُفَرِّدُونَ» قالوا: وما المُفَرِّدُونَ ؟ يا رسول الله قال: « الذاكرون الله كثيرا والذاكراتِ».رواه مسلم

[@TheAmd481]

هل الإنترنت مرضي عند الله؟

[@aliali-sw9mm]

جزاك الله خيرا - اللهم اكتبنا منهم

[@craigl765]

If when putting back together he cracks the case end from being beat on with a hammer. The guys can just go next door and get a new case end casted.

[@MSaidu-sj6vx]

Омметр офигенный.

[@橘子大叔]

Good job！

[@emregokturk19]

Şu Hindistanlı ustalardan bi kafile toplayıp getirmek lazım bizim sanayilere hurdalığa at bak neler yapıyor adamlar . Bizim ustalara gitsen bu ölmüş yenisini al diye şutlarlar. Ellerindeki alet edevat fi tarihinden kalma bizdeki imkanlarla neler yapmaz bu adamlar ....

[@zaferozturk8502]

Selâmün aleyküm. Ben de Bobinajcıyım 48 yıllık. Kolay gelsin...

[@НижникВладимир-с4ш]

Молодцы ребята

[@Благополучнытекоторыенедожилид]

👍🏿👍🏿👍🏿

[@agustinsalazarderodriguez7461]

Wow , amazing!!!

[@vladimirshubin1925]

Схему собирают неплохо. А где пропитка, сушка, проверка сопротивления изоляции? Эта перемотка на пол года - в лучшем случае. Они мотают так, как у нас дороги делают)))

[@jwicker13]

Nice job 👍

[@Благополучнытекоторыенедожилид]

Им бы на нашу металлоприёмку попасть ! 👍👍🏿👍🏿

[@asau804]

как-то видел как они патроны делали сидя на коленках..)

[@Благополучнытекоторыенедожилид]

@@asau804 На каком канале посмотреть ?

[@asau804]

@@Благополучнытекоторыенедожилид набери в ютубе "как делают патроны в пакистане"...там дофига чего выйдет

[@Благополучнытекоторыенедожилид]

@@asau804 Ок

[@azhartaib1484]

Why no varnish and furnace process?

[@Amit_J]

No varnish to tighten the winding?