RIA double stack continues

[@SkipsGunz]

Www.SkipsGuns.com

[@johnsimons5396]

Are you gonna get 3xl shirts or 4xl shirts?

[@jeffreylocke8808]

I did not know you could change a bushing barrel setup to a bushing less bull barrel setup. Thanks for posting.

[@TheGunfighter45acp]

Sweet! I'm looking forward to watching where you go w/this project. RIA offers alot for the $$ to begin with, and this pistol is only gonna get better. 👍👍

[@artimla492]

I definitely love the work that Hayes did with my RIA FS HC Tac Ultra as their tactical slide cut is super slick and fits my aesthetics. I also appreciated the silicon carbide work. Looking forward to see how project turns out.

[@johnbuntin7188]

That light looks great on that pistol.

[@serbandosaenz3295]

Hi, I've been carrying a Rock Island TCM 9 mil double stack 1911 for about 5 years now as my primary duty weapon. I had it redone by Hayes custom guns, and I had monsoon tactical do the Genghis comp port as well as millet for a Holosun 508T. I have been using exclusively Remington R1 magazines in my Rock Island. They work flawlessly and you get an extra round. Comes out to being 19 + 1 with the stock base plate. Thank you for the video. Love that content.

[@SkipsGunz]

Sick I’d love to see it

[@DarthSmittyTheWise]

Rock Island has been on my list for a hot minute. Love, if you offered the slides with an RMR cut, it's hard to find 1911 type slides with a cut for a good price.

[@MrHoustone44]

Are you going to offer a RIA package in the near future? Hayes’s Package is expensive.

[@SkipsGunz]

It’s possible

[@SnD340]

I believe it’s worth the upgrade.

[@roguemodel]

I have an RIA Hayes Custom. They built it with the full monty. It is as good if not better than my Stacatto. Such a joy to shoot.

[@SkipsGunz]

I’d love to check it out and compare

[@JoMamasHouse]

“Can a turd be polished” is the question. Hayes Custom: “Yep.” Edit: Keeping the OP up for all. This frame is fine and it runs ok for the money. But for the effort put into this platform, with the hand of a skilled smith, I would challenge only elite shooters could tell a difference between this upgraded platform and another high end double stack platform.

[@SkipsGunz]

Idk bud turning into a pretty badass setup

[@JoMamasHouse]

@@SkipsGunzoh it very much is turning into a tack driver. That wasn’t a dig, it was very much proof with a skilled smith, this gun can run wonders.

[@SkipsGunz]

@@JoMamasHouse ohh I didn’t take it as a dig I was agreeing

[@BLACKWOLF-1911]

I see they went back to putting a billboard on the slide again.

[@SkipsGunz]

Old pic

[@jeffreylocke8808]

Rock Island Arms makes affordable base guns to customize the way you want.

[@asierra3506]

I had Hayes do a matched pair, one in 9mm the other in 45, both have the full HCG package, turned out awesome. My only regret is I didn’t have them cut for an optic at the same time

[@jasonhill1130]

Great video. Personally like what you can build up. More attainable for me at least.

[@SkipsGunz]

We can always help somehow

[@kylegoldston]

The 4.1" Sig Viper, should be arriving for the Cut today or Monday. Sig Viper close, or CQB?

[@tejascustoms292]

I've been building out RIA's for a while and they are better platforms than people give credit. Now it seems the Prodigy is the starting point for a lot of builders and that's OK, but that $500 to $600 difference in initial purchase price leaves a fair amount of money on the table for upgrades... I shoot in USPSA Limited Major w/ a 10mm RIA fitted w/ a .40 Barrel and my custom internals. If I don't win my division most days, it's not the guns fault, it's mine.

[@SkipsGunz]

So nice when someone understands. Lol

[@LOliver]

I sent mines back to RIA and they did an optic cut with a Chambers Custom plate with the rear sight built in front of the optic.

[@LMV_3]

Can’t wait to see the end result!

[@ninji522]

I had a goal of getting this gun and sending it to Hayes to get a 2011 custom on the cheap. The problem with that is Hayes charges as much as the gun for most of their packages, which imo completely defeats the purpose of buying a budget gun. I understand that cheap work aint good and good work aint cheap but at that price it puts a ton of 2011's on the table without the hassle of shipping and waiting and all that. I'm still interested to see where you go with it but I'd like to see an under $1200 build or in that range.

[@SkipsGunz]

I’m basically at that goal as of this video

[@ninji522]

@@SkipsGunz Awesome, can't wait to see where it goes. It's odd that $1200 and budget go in the same sentence with these guns, but, here we are.

[@loupuleff571]

How did your new trigger fit I'm getting ready to rebuild my RIA HC and the original trigger bow has a ton of up and down slop in the track. I ordered a Xline but have not received it yet to see how much better it fits or not ?

[@SkipsGunz]

It’s not gona fit. I think the fusion triggers might fit I actually use the oem one

[@loupuleff571]

@@SkipsGunz why won’t it fit in what aspect

[@Bryan-1980]

Hey, Skip. Glad you went ahead and got all the sizes, I’m gonna go grab a couple right now. What can you, or what would you do to a rock island single stack Tac 10mm commander with the full length dust cover and pic rail? Just picked one up and so far I’d like lighten the trigger, strip the parkerized finish and DLC the frame and slide, and polish the entire barrel because only the chamber where the casing eject is polished and the rest of the barrel is black. I’d also like keep some kind of iron sight option and add an RMSC cut to the slide. I don’t know much about 10mm 1911’s yet but I’d love to get some good looking port work done if it won’t mess with the reliability. Let me know what you can or would do. Thanks Skip 😎👍🏻👍🏻 you’ve always got the best builds on KZbin

[@SkipsGunz]

Everything u said except ports getit running right nd enjoy basically

[@Bryan-1980]

@@SkipsGunz are you saying you wouldn’t suggest the ports, or that you don’t do them? How much for the DLC slide and frame, full polished barrel, and one of your 2.5-3lb trigger jobs?

[@SkipsGunz]

Here’s the website Www.SkipsGuns.com

[@nikebluegoodwood]

1.5lbs trigger?? 👀 that's wild

[@2ANLA]

Nice!!!!

[@SkipsGunz]

Only getting better lol

[@kanakahawaiian7450]

Watching

[@AdriaanVermeulen-q4o]

So I know we talked a little about the RIA. But then I found your video on the DWX and it looks great. My question is can we get there with the RIA . I noticed that alot of what we talked about on the RIA looks to be done on the DWX. So now I am asking the master. What would you do. Oh before I forget I also would like to get one of your slide releases with the gas pedal for my prodigy 4.25 in the silver look.

[@SkipsGunz]

Not 100percent sure on Dwx yet but we can do all the wit ria for sure and slide stops ready on website just send the email in I don’t handle orders lol just the good looking one lol 😂

[@AdriaanVermeulen-q4o]

@@SkipsGunz sent my information in tonight hope to get a price soon. It really looks great...

[@techiemarksman]

Great video. the RIA Ultra Match Pro has the bull barrel.

[@SkipsGunz]

Yes I have built afew now my buddy has a nice one if interested

[@SkipsGunz]

www.gunbroker.com/item/1067555721

[@SkipsGunz]

@techiemarksman www.skipsGuns.com

[@AS-vk4kf]

Be cool to see you do a Springfield armory ronin emp 4

[@SkipsGunz]

Yeah I just gota win the lottery at this point lol

[@brettb8763]

What kind of clearance do you aim for on the bull barrel to slide?

[@NCTACO]

2011 mags work in these. However you won’t get last round lock back

[@darknature79]

Im amazed you got a firearm on gun broker for half price. My mind is blown.

[@trayp1]

Do you have a parts list? do you mill the slide as Hayes customs does currently?

[@SkipsGunz]

I do cut the slides if interested. Aswell as retune the firearms Just email in if u don’t see what u need done Www.skipsGuns.com

[@odoylerules360]

Does this gun have a firing pin block, or can it slamfire?

[@ff4937]

I would like to see what you would do to the RIA TAC ULTRA HC THREADED 10MM.

[@mattm3812]

Hey Sir! Need to send you my prodigy for a full build!! Also wondering if this RIA will be for sale when you are done?

[@SkipsGunz]

www.SkipsGuns.com

[@enzogolston9780]

I think this rock island would be amazing with a sight block on it making it like a staccato xc. With the weight of this gun i bet it would shoot sooo flat

[@SkipsGunz]

It’s probably getting a plague so she will be flatter then a plate

[@AdriaanVermeulen-q4o]

I would like to know what the kkm ran you I looked at the site but did not see that offered. I am looking at a rock island but I would definitely want to go with the bull barrel first thing and the toolless guide rod.

[@SkipsGunz]

Looking at around $350 barrel and fit

[@AdriaanVermeulen-q4o]

@@SkipsGunz now that is awesome. I will get with you on getting this done. I am really looking at doing this. I need to buy one first. Would it need to be sent to you?

[@SkipsGunz]

@user-rk5pr2wh8t I can get one or u can get one and send it

[@brandongriffin3218]

Hey what brand is that slide stop gas pedal? And can it be PVD coated? I’m going to be sending you all my small parts & barrel to be PVD copper

[@SkipsGunz]

It can be coated

[@paulcartmel1373]

I want one of your slide stops

[@SkipsGunz]

Send an email in off the website we got you Www.skipsguns.com

[@unknown360123]

Have a hayes customs rock island with the full HCG oackage. Ported bull barrel, red dit sughts, trigger job. The works. And ill tell you, the damn thing runs better than staccatos and i would definitely compare it to an atlas. Maybe even better. Best gun ive ever shot.

[@SkipsGunz]

Hayes absolutely knows what there doing

[@jaimeruiz521]

​@@SkipsGunzthe only crappy part is they don't work on 10mm.

[@UncleMichaelable]

I contacted them today and they aren’t working on Rock islands now. They are too busy with making their own guns.

[@unknown360123]

@UncleMichaelable no way! Damn man, sorry to hear.. got a feeling their cobra line is gonna take off big though

[@UncleMichaelable]

@@unknown360123 im gonna keep on them as you don’t advertise things you don’t do.

[@DustyGold228]

Have you worked on any Cosaint arms 2011s?

[@SkipsGunz]

No actually but I can

[@redeye8526]

does RIA even make these anymore ?

[@SkipsGunz]

Yes

[@christopherwilliams6048]

Would you be able to fit a bull barrel to my colt rail gun? Or know someone that would?

[@SkipsGunz]

If u can find the correct barrel I can Www.SkipsGuns.com

[@tompbz]

are the grips thicker than "2011s"?

[@roguemodel]

The RIA is a double stack and I can tell you, it is a 2011 grip.

[@MikeJones-um2wo]

Im looking for an extended mag release for the ria ultra tac fs hc

[@dominiqueB777]

Got one on the way. Its going to dsc gunworkz, then to you for final touchs✊🏾

[@SkipsGunz]

Ready