Skull Staining: Applying Stains (Part 3)

[@usskullhunter]

➝ SKULL CARVING TOOLS I USE ★ Dremel 4000 amzn.to/2tBKq2H ★ Flex Shaft amzn.to/2IENLIO ★ Adjustable Chuck amzn.to/2Xqp7if ★ Respirator amzn.to/2H0W3Z7 ★ Ear Protection amzn.to/2H7DIJI ★ Ball Carbide Burr amzn.to/2H3jkJU ★ Inverted Cone Burr amzn.to/2EwHr1P ★ Cylinder Carbide Burr amzn.to/2EwmofT ★ Tungsten Steel Carbide Burr amzn.to/2EuQEYs ★ Diamond Dust Burrs amzn.to/2TeFbVg ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ➝ SKULL CLEANING TOOLS ★ Aquarium Heater amzn.to/2EdGNoM ★ Mesh Bags amzn.to/2VRQ4cM Some links above are affiliate links! ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

[@NickDoobs]

What's the best way to apply super glue to the teeth? I find that the glue hardens in the brush within a few seconds. A q tip works a little better, but it's hard to get in the nooks and crannies.

[@RavensCraftyNest]

This was very helpfull! Thank you for sharing. I am going to use this info on my next skull project with the staining. 🤗

[@usskullhunter]

You bet! Thanks for watching :)

[@andersonrm4774]

Enjoyed all your videos, Was just given a new elk skull to carve. Two reasons to carve it, 1. Wife does not like the European mount- white, says it creeps her out. 2. Whoever did the mount coated it with a sealant that has yellowed. My question is can I get rid of the sealant so I can carve, then stain it? Thanks.

[@leahmallow9863]

Hey I just stained my skull after carving but I’m having trouble getting the stain to highlight what I want it to highlight I fact it’s not really staining the area at all.. I used wood stain .. am I using the wrong stuff maybe.

[@leahmallow9863]

I am using a wood dark oil based wood stain.. and I applied and wiped it off and left it in the carved areas for several hrs then went to wipe it off and it all just wiped off.. any tips would be appreciated

[@martinahunsicker]

What type of stain do you use? I don’t want to use natural methods. Can you use a polyurethane stain?

[@usskullhunter]

I use a wide verity of stains. Poly being one of them!

[@jennc8554]

Hi new to Chanel very cool I do some Moose antler carving I’ve been following some of dmitry gordeskys work. You videos are very good and great for the people just starting out. You might want to stress the importance of the masks I got a nasty lung infection one year.gotta love carving the the bone it’s definitely my preference. Great channel 👍

[@usskullhunter]

Thanks for watching Jenn! And yes it is very important like you said. Would love to see your moose antler carving!

[@jennc8554]

U.S. Skull Hunter if you want to share your email I can send you a pic.

[@jennc8554]

I would love to see what you think.

[@usskullhunter]

@@jennc8554 send it over! [e-mail]

[@usskullhunter]

Want to learn skull carving? Here is a free guide to show you exactly what you need to get started usskullhunter.ck.page/bd2b65322a

[@slims6788]

Hi Hunter, i have a skull and i want to dipping with spray paint, do i need before to spray with polyurethane and after finsih dipping i put a coat of anti uv ?

[@usskullhunter]

Hey Slim! Yes and yes would be recommended

[@kelsieclyke2899]

Thanks for info great vids. Im wondering if doing a cofee stain do you still use a lacqour to prevent break down. Im a newbie so still learning

[@usskullhunter]

Hey Kelsie! Yes, a UV protective clear coat will help.

[@kelsieclyke2899]

@@usskullhunter thanks it cane out great😎😎

[@mariakowalska7308]

White gloves latex are the best!!! :)

[@usskullhunter]

Haha yup :)